TAMIYA
Tamiya
Tamiya is a Japanese manufacturer of plastic model kits, radio controlled cars, battery- and solar-powered educational models, sailboat models, acrylic and enamel model paints, and various modeling tools and supplies. The company was founded by Yoshio Tamiya in Shizuoka, Japan, in 1946.
Under the special order is possible delivery of almost any catalog position TAMIYA, including models and accessories for RC. Make a request with the catalog number & quantity on the e-mail: distibution@dubick.pro or use the feedback form in the «CONTACTS» http://slotracingshop.com/en/contact section.
You can find full Tamiya on-line catalog here: http://www.tamiya.com/english/products/archive.htm
PS spray paints were especially developed for decorating transparent polycarbonate bodies used in SRC & R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing the model. Paint the body from the inside, keeping the can about 30 cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand, using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on glow engine R/C car bodies.
-
TAMIAY PS-20 FLOURESCENT RED - #TAM86020
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA 1/14 R/C Buggyra Fat Fox (TT-01 Type-E) - #58661
TAMIYA 1/14 R/C Buggyra Fat Fox (TT-01 Type-E)
For more information click here: https://www.tamiya.com/english/products/58661/index.htm
-
TAMIYA 1/14 R/C Mercedes-Benz Race Truck Actros MP4 MB Motorsport (TT-01 Type-E) - #58683
TAMIYA 1/14 R/C Mercedes-Benz Race Truck Actros MP4 MB Motorsport (TT-01 Type-E) - #58683
For more information click here: https://www.tamiya.com/english/products/58683/index.htm
-
TAMIYA 1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E) - #58642
TAMIYA 1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E) - #58642
Specifications
★Length:438mm, Width: 190mm, Height: 207mm ★Wheelbase: 257mm ★Tire Width/Diameter: 28/70mm ★Bathtub Type Chassis Frame ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD ★F/R 3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio=8.35:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately) -
TAMIYA 30 ADDITIONAL BLADES FOR DESIGN KNIFE #TAM74020 - #TAM74074
Special order!
Additional blades for TAMIYA DESIGN KNIFE - #TAM74020
-
TAMIYA ANGLED TWEEZERS - #TAM74003
Special order!
These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.
-
TAMIYA DESIGN KNIFE with 30 additional blades- #TAM74020
Special order!
-
TAMIYA Masking tape for curves, width 12 mm - #TAM87184
TAMIYA Masking tape for curves, width 12 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape for curves, width 2 mm - #TAM87177
TAMIYA Masking tape for curves, width 2 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape for curves, width 3 mm - #TAM87178
TAMIYA Masking tape for curves, width 3 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape for curves, width 5 mm - #TAM87179
TAMIYA Masking tape for curves, width 5 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape refill, width 18 mm - #87035
TAMIYA Masking tape refill, width 18 mm - #87035
-
TAMIYA Masking tape, width 10 mm - #TAM87031
TAMIYA Masking tape, width 10 mm
- It even adheres well to uneven surfaces, but is easy to remove.
- Has enough elasticity to work well on curves and small edges.
- Paint does not bleed though the tape.
Comes in its own dispenser with cutter to avoid rough edges.
-
TAMIYA Masking tape, width 40 mm - #87063
TAMIYA Masking tape, width 40 mm - #87063
Tamiya Masking Tape is thin, very strong adhesive tape for modelling use.
-
TAMIYA Masking tape, width 6 mm - #TAM87030
TAMIYA Masking tape, width 6 mm
- It even adheres well to uneven surfaces, but is easy to remove.
- Has enough elasticity to work well on curves and small edges.
- Paint does not bleed though the tape.
Comes in its own dispenser with cutter to avoid rough edges.
-
TAMIYA PS ANODIZED GREEN - #TAM89911
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-1 WHITE - #TAM86001
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-10 PURPLE - #TAM86010
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-11 PINK - #TAM86011
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-12 SILVER - #TAM86012
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-13 GOLD - #TAM86013
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-14 COPPER - #TAM86014
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-15 METALLIC RED - TAM86015
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.