PROSLOT
-
PROSLOT C-Can assembled endbell (w/copper hardware) - #PS-618
PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS-618
-
PROSLOT Agent 99 Bearing Oil - #PS602
Ball Bearing Oil (Hulk Green)
-
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
Magnets only!
-
PROSLOT Magnet Clips for C-cans,1 pc. - #PS640
PROSLOT Magnet Clips for C-cans, 1 pc.
This is the clips for all 12-group (C-cans) motors.
-
PROSLOT HARDWARE FOR PROSLOT MOTORS X-12 GROUP, W/SPRING CUPS & SCREWS- #PS642
Hardware set complete -includes hardware, oilite, spring cups and screws
-
PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641
Brush Hood & Heat Sink set
-
PROSLOT SpeedFX 16D/S16D SETUP - #PS 2004
FX 16D/S16D Motor Setup
-
PROSLOT 16D/S16D MOTOR CAN - #PS2005
Proslot can for 16D motors, w/out magnets
-
PROSLOT SPEED FX S16D BLUEPRINT SETUP, W/MATCHED MAGNETS - #PS 2100
SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.
-
PROSLOT GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.06 mm, w/screw- #680-39
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619
PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619
9 Lead Wire with Clips 18 AWG w/441 Ultra fine strands
-
PRO SLOT LEAD WIRE 18Ga (0,82 mm²) with soldered copper clip on both ends, pink, 40 cm - #PSL620
DRAGSTER LEAD WIRE WITH CLIPS - 40 cm long with nickel plated guide clips
-
PROSLOT Ø3/32" (2.36 mm) DRILL BLANK AXLE, (length 58 mm), 6 pc - #PS-607
3/32" (2.36 MM) DRILL BLANK AXLE. Axle length is 58 mm
-
PROSLOT Ø3/32" (2.36 mm) DRILL BLANK AXLE, (length 58 mm) - #PS-607
3/32" (2.36 MM) DRILL BLANK AXLE. Axle length is 58 mm
-
PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 3 m (10 ft) - #PS-622
DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips
-
PROSLOT 16D/S16D REPLACEMENT POLYMER ENDBELL - #PS 2008
16D/S16D REPLACEMENT POLYMER ENDBELL
-
PROSLOT SpeedFX matched magnets for D-cans (16D) - #PS2016
SPEEDFX MATCHED MAGNETS FOR D-CANS (16D) (1 pr.)
-
PROSLOT ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods - #2009
SET OF ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods
-
PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010
PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010
-
PROSLOT TORX 5 SCREW FOR ENDBELLS & BRUSH HOODS, 1 pc. - #PS717
1 self starting T5 Torx can and endbell screws
-
PROSLOT S16D BALANCED ARMATURE (commutator trued) - #PS 2006
Basic armature for PROSLOT SPEED FX motor.
-
PROSLOT S16D ARMATURE, BALANCED, DIA. .513" - #PS 700
Special order!
Write to us to select the angle of the armature!
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 38 DEGREE - #PS-700C-38
Super 16 C Arm .513, 38 degrees, balanced
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 42 DEGREE - #PS-700C-42
Super 16 C Arm .513, 42 degrees, balanced
