MOSSETI
-
MOSSETTI Patriot "Revolver" chassis - flat track version - for brushless - #MR4002
MOSSETTI Patriot "Revolver" chassis - flat track version - for brushless - #MR4002
With outboard shaft bearing support included
-
MOSSETTI Outboard shaft support for brushless motors - #MR1062
MOSSETTI Outboard shaft support for brushless motors - #MR1062
Use 5 mm bushing/bearing
-
MOSSETTI Patriot motor braces, 2 pcs. (fits jk) - #MR-1050
MOSSETTI Patriot motor braces, 2 pcs. (fits jk) - #MR-1050
Spring steel .050" thick - nickel plated
-
MOSSETTI PATRIOT CHASSIS CLIP, 1 pc - #MR1051
Retaining Clip (2) – All Chassis
-
MOSSETTI Chassis connector J bar (2) 1.3 mm (.050") - #MR1049
MOSSETTI Chassis connector J bar (2) 1.3 mm (.050") - #MR1049
New J Bar chassis clip. Works with Mossetti, Mid America and JK chassis.
-
MOSSETTI Silicone chassis spacers, 8 pcs. - #MR-1055
MOSSETTI Silicone chassis spacers, 8 pcs. - #MR-1055
Fits all patriot chassis, fits over chassis tube - dampens vibration
-
MOSSETTI Chassis damping foam 1/16" thick - 3M adhesive back - fine cell - 2" x 3" - #MR-1056
MOSSETTI Chassis damping foam 1/16" thick - 3M adhesive back - fine cell - 2" x 3" - #MR-1056
Chassis dampening foam - 1/16" thick with 3m adhesive back fine cell 2" x 3"
-
MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1060
3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair
“Really Cool Bushings”-With “Internal Oil Channel” -3/32” Axle Bushings (pr). These are a direct fit for 4.5” Front Axle positioning – Can also be used for Rear axle positioning with fore/aft and up/down
-
MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1061A
MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1061A
Fits directly into chassis
-
MOSSETTI Motor screws, 8 pcs. - #MR1054
MOSSETTI Motor screws, 8 pcs. - #MR1054
Package of 8 motor screws. Screw motor into the MR1004 chassis
-
MOSSETTI Patriot avenger "AIR" chassis w/ heavy weight plus pans - #MR3203
MOSSETTI Patriot avenger "AIR" chassis w/ heavy weight plus pans - #MR3203
-
MOSSETTI Motor screws, 4 pcs, w/allen key - #MR1053
MOSSETTI Motor screws, 4 pcs, w/allen key - #MR1053
4 motor screws and allen key for the Patriot 1004 chassis.
-
MOSSETTI Chassis damping rubber strips (20 pcs.) with "3M" adhesive backing tape - #MR-1058
MOSSETTI Chassis damping rubber strips (20 pcs.) with "3M" adhesive backing tape - #MR-1058
Flexible rubber - 0,5 mm (.020") thick
-
MOSSETTI Chassis damping rubber material 2" x 3" piece w/ 3M self adhesive back - #MR-1059
MOSSETTI Chassis damping rubber material 2" x 3" piece w/ 3M self adhesive back - #MR-1059
-
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
This is a spec chassis created for the ECFS Production and Penn Jersey Xfinity series. It is the MR1112 Striker Center and the MR3122 Pans