KOFORD
-
KOFORD Ø.471" (11.96 mm) bearing assembly tool (for Eurosport motor) - #M523-471
KOFORD Ø.471" (11.96 mm) bearing assembly tool (for Eurosport motor) - #M523-471
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ultralight qualifying wire, 1 pc. - #M383
KOFORD Ultralight qualifying wire, 1 pc. - #M383
The Nat’s TQ ultralight qualifying lead wire made from ML magnet wire. Enough for several cars.
-
KOFORD ALIGNMENT BAR W/HOLES - #M148
Alignment bar with holes, provided with centering holes for both vertical and horizontal style brush hoods. The essential tool for motor assembly, used by motor builders world wide
-
KOFORD HEAVY TIRE TRACTION, bottle - #M319
Heavy tire traction. The choice of the Pro's.
-
KOFORD Ø.476" (12.09 mm) bearing assembly tool (for Eurosport motor) - #M523-476
KOFORD Ø.476" (12.09 mm) bearing assembly tool (for Eurosport motor) - #M523-476
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.478" (12.14 mm) bearing assembly tool (for Eurosport motor) - #M523-478
KOFORD Ø.478" (12.14 mm) bearing assembly tool (for Eurosport motor) - #M523-478
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.479" (12.17 mm) bearing assembly tool (for Eurosport motor) - #M523-479
KOFORD Ø.479" (12.17 mm) bearing assembly tool (for Eurosport motor) - #M523-479
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.480" (12.19 mm) bearing assembly tool (for Eurosport motor) - #M523-480
KOFORD Ø.480" (12.19 mm) bearing assembly tool (for Eurosport motor) - #M523-480
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.481" (12.22 mm) bearing assembly tool (for Eurosport motor) - #M523-481
KOFORD Ø.481" (12.22 mm) bearing assembly tool (for Eurosport motor) - #M523-481
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.484" (12.29 mm) bearing assembly tool (for Eurosport motor) - #M523-484
KOFORD Ø.484" (12.29 mm) bearing assembly tool (for Eurosport motor) - #M523-484
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD 408 BRAID, pair-#M661
The best choise for class Formula 1/32
-
KOFORD BIG HEAD PRO BODY PINS, 48 psc. in tube - #M376
Big head pro body pins. Ideal length for bending over on swing over front body mounts, or for use on with full width body mounts. Custom made just for us, the best on the market. 48 pins per package.
-
KOFORD .050" INSERT IN ALLEN WRENCH, straight, dia. 2 mm - #M163
Improved reduced diameter insert for the above wrench, also fits all standard handles
-
KOFORD Ø2 mm AXLE, selection (length 55 mm) - #M639
2mm ultraprecision premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground. One per package
-
KOFORD MEDIUM TIRE TRACTION, bottle - #M320
Medium tire traction. Ideal for G15 C12 and lower class cars which require a lighter glue
-
KOFORD EDM Drilled (.040" hole) Ø2 mm AXLE, selection - #M743
KOFORD EDM Drilled Ø2 mm AXLE, selection
EDM drilled, 2mm .040 hole qualifying/race axle. premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground.
-
KOFORD ALUMINUM SPRING CUPS (for 3 coils spring) ON ENDBELLS FOR EUROSPORT MOTORS, pair - #281
Self centering ultra light aluminum alloy spring cups for Koford set ups
-
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266
.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag
-
KOFORD 3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair - #M546-1
3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair
-
KOFORD 3/32" X 3/16" (2.36 mm X 4.76 mm) axle oilites in production chassis, 1 cd. (6 pairs) - #M546
KOFORD 3/32" X 3/16" (2.36 mm X 4.76 mm) axle oilites in production chassis, 1 cd. (6 pairs) - #M546
-
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened - #M671-27
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened - #M671-27
-
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-27
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-27
-
KOFORD Ø.485" (12.32 mm) bearing assembly tool (for Eurosport motor) - #M523-485
KOFORD Ø.485" (12.32 mm) bearing assembly tool (for Eurosport motor) - #M523-485
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.486" (12.34 mm) bearing assembly tool (for Eurosport motor) - #M523-486
KOFORD Ø.486" (12.34 mm) bearing assembly tool (for Eurosport motor) - #M523-486
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.487" (12.37 mm) bearing assembly tool (for Eurosport motor) - #M523-487
KOFORD Ø.487" (12.37 mm) bearing assembly tool (for Eurosport motor) - #M523-487
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.488" (12.39 mm) bearing assembly tool (for Eurosport motor) - #M523-488
KOFORD Ø.488" (12.39 mm) bearing assembly tool (for Eurosport motor) - #M523-488
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.489" (12.42 mm) bearing assembly tool (for Eurosport motor) - #M523-489
KOFORD Ø.489" (12.42 mm) bearing assembly tool (for Eurosport motor) - #M523-489
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.490" (12.45 mm) bearing assembly tool (for Eurosport motor) - #M523-490
KOFORD Ø.490" (12.45 mm) bearing assembly tool (for Eurosport motor) - #M523-490
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.491" (12.47 mm) bearing assembly tool (for Eurosport motor) - #M523-491
KOFORD Ø.491" (12.47 mm) bearing assembly tool (for Eurosport motor) - #M523-491
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.500" (12.7 mm) bearing assembly tool (for Eurosport motor) - #M523-500
KOFORD Ø.500" (12.7 mm) bearing assembly tool (for Eurosport motor) - #M523-500
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.501" (12.72 mm) bearing assembly tool (for Eurosport motor) - #M523-501
KOFORD Ø.501" (12.72 mm) bearing assembly tool (for Eurosport motor) - #M523-501
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
-
-
-
-
KOFORD Ø.498" (12.65 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-498
In stock
One of the most used sizes for ES32 and ES24!
-
KOFORD Ø.500" (12.7 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-500
In stock
One of the most used sizes for ES32 and ES24!
-
-
Koford Yellow spoiler sticker, 1 pc. - #M719
Koford Yellow spoiler sticker, 1 pc. - #M719
Decorate your body with branded stickers :)
-
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
5MM flanged bushing for Super Feather can & endbell.
-
KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647
JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.
-
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
JK Hawk motor with with bonded Neo magnets and Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs
-
-
-
-
-
KOFORD BRUSH RADIUS TOOL, Ø5.2 mm - #M270
Brush radius tool for fast break in. The essential tool for maximum motor performance. Now hardened for long life and with improved knurl
-
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.
-
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
SPECIAL ORDER!
-
KOFORD Flux brush - #M424
At last a flux brush which is the correct size for slot car racing and will hold up to the attack of acid flux.
-
KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249
.007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.
-
KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265
.007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.
-
KOFORD 408 BRAID 12 PAIRS in a plastic box - #M660
12 pairs of 408 strand braid in a easy open plastic box
-
KOFORD PINION 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #M599-8
KOFORD PINION 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #M599-8
8 tooth 64 pitch stainless pinion with boss to help keep solder out of teeth.
-
KOFORD .005" (0.13 MM) TEFLON GUIDE WASHER, 6 pcs. - #M322
.005 Teflon® guide washer. Use to reduce friction between guide and chassis. Where guide height adjustments are required, use #M321. Packaged 6 per bag.
-
KOFORD 3/32" (2.36 mm) .010" (0,254 mm) thick, plastic axle spacer, 1 pc. - #M704
3/32" (2.36 mm) .010" (0,254 mm) thick, plastic axle spacer, 1 pc.
-
KOFORD Ø.537" (13.64 mm) bearing assembly tool (for motor) - #M188-537
KOFORD Ø.537" (13.64 mm) bearing assembly tool (for motor) - #M188-537
Prepare your motor fast & precise.
-
KOFORD LIGHT TIRE TRACTION, bottle - #M384
Light tire traction
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.459"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD 3/32" (2.36 MM) .010 (0.26 MM) THICK PHOS BRONZE AXLE SPACER, 12 psc. - #M296
.010 thick 3/32 Phos Bronze axle spacers. Very hard but will not stick to magnets. 12 per bag.
-
KOFORD Drag glue regular, bottle - #M452
KOFORD Drag glue regular - #M452
Drag Glue. Blow away the competition! Tests show our glue results in better ET’s than existing technology!
-
KOFORD EPOXY HIGH TEMP MAGNET ADHESIVE, one-component - #M345
High temperature epoxy magnet adhesive. Single component advanced structural adhesive especially formulated for gluing slot car magnets. Has superior impact strength and high temperature capabilities compared to commonly available magnet adhesives. Oven cure.
-
KOFORD Ø4/40" SCREW IN RIMS & GEARS, PERFORATED, 12 pcs. - #621
Gold billet machined hollow set screws (not rolled like standard set screws). Increased tightening cycles over standard set screws. (bag of 12)
-
KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606
KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606
Precision matched. Recommended for wing racing.
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 4 psc. - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
KOFORD ARMATURE TUBE, Ø13.5 mm - M602
KOFORD ARMATURE TUBE, Ø13.5 mm - M602
-
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
Matched .450 long x .155 thick C can magnets with new (stronger) orientation. Especially recommended for G12 wing car racing with the M528 can.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 pc - #M623S
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 pc - #M623S
Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust. They feature extra tight diameter tolerances to prevent play between axle and bearings as well as exceptional straightness. They are made from a special tool steel with twice the strength of drill blank axles.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R
Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
Bulk pack of 100 3/32 ultra precision unplated axles. Esceptional tolerances and strength.
-
KOFORD SILVER (5%) SOLDER W/FLUX CORE- #M333
Silver solder with flux core. 5% silver for 82% higher shear strength compared to regular silver solder.
-
KOFORD ARMATURE TUBE, Ø13.5 mm, 6 pcs.
KOFORD ARMATURE TUBE, Ø13.5 mm, 6 pcs.
-
KOFORD HEAT TRANSFER COMPOUND - M295
Heat transfer compound.
Apply between brush and hood on motors to reduce comm temperatures and increase reliability, also especially effective for removable soldering iron tips.
-
KOFORD LOW TEMP SOLDER W/FLUX CORE - #M444
Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks
-
KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated - #M542
KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated - #M542
8 T Black Diamond coated pinion with boss for greater solder surface area for use with G7. Coating reduces friction and prevents solder from flowing into teeth. Use against plastic spurs only
-
KOFORD STANDART PROFILE GRAPHITE GUIDE, THREADED - #M273
Precision threaded graphite guide with lead wire slots.
On each one guide there is an inscription «STARBURST»
-
-
KOFORD Crown gear 48 pitch 28 teeth, 3/32" axle, narrowed & lightened - #M671-28
KOFORD Crown gear 48 pitch 28 teeth, 3/32" axle, narrowed & lightened - #M671-28
Narrowed and lightened precision low wobble 28 tooth x 3/32 crown gears. Precision bored axles hole and lightweight magnesium hub
-
KOFORD Crown gear 48 pitch 28 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-28
KOFORD Crown gear 48 pitch 28 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-28
Narrowed and lightened precision low wobble 28 tooth x 3/32 crown gears. Precision bored axles hole and lightweight magnesium hub
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 24 psc. in box - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
KOFORD STEEL PIN TUBING, lenght 80 mm, 1 pc. - #M259
Precut spring temper stainless steel pin tubing, fits full width of car.
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/28, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 20º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/28, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/28
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 20
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/30, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 28º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/30, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/30
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 28
-
KOFORD 760" LONG, C12 ARMATURE (for set in Eurosport motors) - #М467-12C
race arm, 32° .490 C12 arm .760 long, 2006 Nat’s winner Pro
Alternative to expensive Eurosport class armatures. Suitable for all setups, except the latest micro-motors for F 1/32.
-
-
KOFORD Ø.539" (13.69 mm) bearing assembly tool (for motor) - #M188-539
KOFORD Ø.539" (13.69 mm) bearing assembly tool (for motor) - #M188-539
Prepare your motor fast & precise.
-
-
KOFORD Ø.541" (13.74 mm) bearing assembly tool (for motor) - #M188-541
KOFORD Ø.541" (13.74 mm) bearing assembly tool (for motor) - #M188-541
Prepare your motor fast & precise.
-
KOFORD Ø.542" (13.77 mm) bearing assembly tool (for motor) - #M188-542
KOFORD Ø.542" (13.77 mm) bearing assembly tool (for motor) - #M188-542
Prepare your motor fast & precise.
-
KOFORD Ø.560" (14.22 mm) bearing assembly tool (for motor) - #M188C-560
KOFORD Ø.560" (14.22 mm) bearing assembly tool (for motor) - #M188C-560
Koford Bearing installation tool made out of aluminum. Machined aluminum with 2mm shaft useful in gluing in magnets and installing can end bearings and oilites. Available in many sizes ranging from .468 to .590
Actual photo will be added soon :)
-
KOFORD Ø.569" (14.45 mm) bearing assembly tool (for motor) - #M188-569
KOFORD Ø.569" (14.45 mm) bearing assembly tool (for motor) - #M188-569
Prepare your motor fast & precise.
-
KOFORD Ø.571" (14.50 mm) bearing assembly tool (for motor) - #M188-571
KOFORD Ø.571" (14.50 mm) bearing assembly tool (for motor) - #M188-571
Prepare your motor fast & precise.
-
KOFORD Ø.580" (14.73 mm) bearing assembly tool (for motor) - #M188C-580
KOFORD Ø.580" (14.73 mm) bearing assembly tool (for motor) - #M188C-580
Koford Bearing installation tool made out of aluminum. Machined aluminum with 2mm shaft useful in gluing in magnets and installing can end bearings and oilites. Available in many sizes ranging from .468 to .590
-
KOFORD HIGH TEMP ENDBELL EPOXY, one-component - #M385
High temp. endbell epoxy. Optimized for use in endbells. Oven cure
-
KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, pinned, Black Diamond coated - #M515
KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, pinned, Black Diamond coated - #M515
Multiple Nat's winner. Pinned 8T Black Diamond coated pinions for G7 racing. Coating reduces friction and prevents solder from flowing into teeth. Use with M636 pinion wire.
-
KOFORD Pinion 64 pitch, 9T, 0° angle, 2 mm bore, precision & hardened - #M323-9
KOFORD Pinion 64 pitch, 9T, 0° angle, 2 mm bore, precision & hardened - #M323-9
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
KOFORD HIGH TEMPERATURE SOLDER W/FLUX CORE - #M618
High temperature silver solder. Melting point 598F. Ideal for soldering on pinions for G7 motors to prevent spinning.
-
KOFORD Axle ballbearing 3/32" (2.36 mm), narrow width, open, ultralight, pair - #M235
KOFORD Axle ballbearing 3/32" (2.36 mm), narrow width, open, ultralight, pair
-
KOFORD Axle ballbearing 3/32" (2.36 mm), ultra premium, shielded, pair - #M217
KOFORD Axle ballbearing 3/32" (2.36 mm), ultra premium, shielded, pair - #M217
Ultra Premium shielded rear axle ball bearings, ribbon retainer and ultra precise internal geometry for smooth rotation and the lowest drag. Highest quality steel and ribbon retainer for long life. Made in Switzerland.
-
KOFORD LEAD WIRE RETAINER, 1 pc. - #M324
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
KOFORD SILVER HEAT TRANSFER COMPAUND - M329
Silver heat transfer compound.
Apply between brush and hood on motors to reduce comm temperatures and increase reliability for all classes of racing. Silver will settle over time, mix before using.
-
KOFORD SHORT BIG HEAD BODY PINS (STRAIGHT), 48 psc. in tube - #M545
Short length big head pro body pins. No trimming required! Won't stick past the end of the body mount tube and hang up lead wire or stick marshalls. Ligher weight then long pins. Custom made just for us, the best on the market. 48 pins per package.
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-250
ES SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .300" (7.62 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-300
ES SETUP 10 MAGNETS
ISRA 2014 World's champion in class Eurosport 1/32
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .300" (7.62 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD ES SETUP TOOL, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-ES-250
ES SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD Soft magnet cleaning putty - #M724S
Soft magnet cleaning putty.
Soft cleaner for removing chips from magnets. May be kneaded and reused many time. Because material starts out soft it will absorb more chips without becoming too hard.
-
KOFORD .003" (0,07MM) AXLE SPACING TOOL 3/32 - #M572
003 Side play adjusting tool for 3/32 axles. Allows you to quickly get the perfect side play every time
-
KOFORD SIDE PLAY ADJUSTING TOOL (0.13 MM) - #M388
Side play adjusting tool for the rear axle of non ball bearing cars. Allows you to quickly get the perfect side play every time.
-
KOFORD Graphite guide, standart profile, no threads, 1 pc - #M699
KOFORD Graphite guide, standart profile, no threads, 1 pc - #M699
-
KOFORD Graphite guide, standart profile, no threads, 1 cd. (6 pcs.) - #M699
KOFORD Graphite guide, standart profile, no threads, 1 cd. (6 pcs.) - #M699
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, w/clips, 1 pr. - #M430
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, w/clips, 1 pr. - #M430
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Worlds and Nat's winner. With clips
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.) - #M431
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.)
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Three foot length of our 413 strand light weight ultraflex lead wire
-
KOFORD RECTANGULAR MOTOR BOX WITH FOAM, plastic, 1 pc. - #603
Motor Boxes with 2 piece yellow foam
-
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 4 pcs. - #M256-4
0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws
-
KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10
KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
KOFORD DIAMOND WHEEL FOR MAGNETS .500"
ZHB DIAMOND WHEEL FOR MAGNETS Ø13.70 mm
Special order
-
KOFORD DIAMOND WHEEL FOR MAGNETS .538"
ZHB DIAMOND WHEEL FOR MAGNETS Ø13.70 mm
Special order
-
KOFORD 3/32 AXLES Flatted Ø3/32" (2.36 mm), (length 53 mm) - #M156F
Premium 3/32 axles with precision ground gear and wheel flats, now with perfect balance with M472 Koford tires and the new Koford gears.
-
KOFORD .050" GEAR AND WHEEL ALLEN WRENCH, black, anodized - #M162
Precision gear and wheel wrench with reduced diameter for clearance with plastic gears
-
KOFORD APRON - #363
Koford Engineering apron with 3 sections
-
KOFORD T-SHIRT, SIZE- S - #204-S
KOFORD T-SHIRT, SIZE- S
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- M - #204-M
KOFORD T-SHIRT, SIZE- M
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- L - #204-L
KOFORD T-SHIRT, SIZE- L
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XL - #204-XL
KOFORD T-SHIRT, SIZE- XL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XXL - #M204-XXL
KOFORD T-SHIRT, SIZE- XXL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD THREAD RETAINING COMPOUND, tube -M300
Thread retaining compound used to keep can screws from vibrating loose on aluminum endbells. Prevents endbell damage by allowing can screws to be tightened until only snug
-
KOFORD CONTROLLER SPRINGS - #M371
Controller springs for all Koford controllers
-
KOFORD Ultrastrong radial C-Can drag magnets- #M592
KOFORD Ultrastrong radial C-Can drag magnets
Ultrastrong radial drag magnets, when used with M593 treated can produces 4% more flux then competitors wide can and .170 thick quad magnets without the problems of nonstandard size cans. .165 thick x .520 long
-
KOFORD ARMATURE M199SAW CUSTOM EURO ARMS, - M199SAW Custom Euro arms
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Wingings: various
- Dia.: 0.459"...0.490"
- Stack: 0.235"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)Armatures comes after rebalancing (cost 3$).
-
KOFORD BRASS GUIDE NUT 9.5 MM SOCKET - #M615
Brass guide nut. Adds one gram nose weight
-
KOFORD DRILLED ALUM ANODIZED GUIDE NUT, 9,5 MM SOCKET - #M302
Lightweight drilled, anodized aluminum guide nut.
-
KOFORD 3/32" (2.36 MM) .024" (0.61 MM) THICK STEEL AXLE SPACER, 12 psc. - #M624
.024" X 3/32" stainless axle spacers. 12 per bag.
-
KOFORD Ø3/32" (2.36 mm) PREMIUM HOLLOW AXLE, length 53 mm - #KOF339
Premium Qualifying 3/32 .066 hole hollow axle made from tubing. For those who wish to grind their own flats.
-
KOFORD Ø3/32" (2.36 mm) Narrow flatted ultra-precision axle - #M744
KOFORD Ø3/32" (2.36 mm) Narrow flatted ultra-precision axle - #M744
Precisely ground flats to eliminate spinning and provide perfect dynamic balance. Special steel for twice the strength of drill blank axles and better rust resistance then other unplated axles
-
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle - #M697F
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle - #M697F
EDM drilled and wire cut flatted .060 hollow race axle. Lighter and 50% stronger the M445F
-
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle (length 55 mm) - #M754
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle (length 55 mm) - #M754
E24 2.165" (55mm) long EDM drilled and wire cut .060 hole hollow axle with no flats. Light and strong.
-
KOFORD Controller wiper button, 1 pc. - #M738
Controller wiper button, 1 pc.
Wiper button for all Koford controllers
-
KOFORD Ø1/8" (3.15 mm) drill blank axle, length 2.677" (68 mm) - #M418
KOFORD Ø1/8" (3.15 mm) drill blank axle, length 2.677" (68 mm) - #M418
1/8 axles with the famous Koford precision fit. The same straightness and size control which racers have long enjoyed with 3/32 axles now comes to 1/8 axles
-
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 pc. - #M203T5
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 pc. - #M203T5
Lastest Pro design air kit with true .005" sidedams and .005" spoiler. For shorter cars
-
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 cd. (6 pc.) - #M203T5
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 cd. (6 pc.) - #M203T5
Lastest Pro design air kit with true .005" sidedams and .005" spoiler. For shorter cars
-
KOFORD Pinion 64 pitch, 11T, 0° angle, 2 mm bore, precision & hardened - #M323-11
KOFORD Pinion 64 pitch, 11T, 0° angle, 2 mm bore, precision & hardened - #M323-11
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 38 DEG - #468-BOX-38
Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD 3/32" (2.36 mm) .060" (1,52 mm) thick machined aluminum axle spacer, 6 psc. - #M733
KOFORD 3/32" (2.36 mm) .060" (1,52 mm) thick machined aluminum axle spacer, 6 psc. - #M733
-
KOFORD 3/32" (2.36 MM) .100" (2.54 MM) LONG, ALUMINUM SPACERS, 6 psc. - #M625
.100 long machined aluminum spacer for 3/32 axles. 6 per bag.
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 9 m. (30 ft.) - #М667
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 9 m. (30 ft.) - #М667
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Worlds and Nat's winner.
-
KOFORD T-SHIRT, SIZE- XXXL - #M204-XXXL
KOFORD T-SHIRT, SIZE- XXXL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD 3/32" (2.36 mm) .160" (4.06 mm) long, aluminum spacers, 6 psc. - #M734
.160 long machined aluminum spacer for 3/32 axles. 6 per bag.
-
KOFORD 3/32" (2.36 MM), .175" (4.45 MM) LONG, PLASTIC AXLE SPACER, 1 pc. - #M449
Plastic axle spacer for narrow motor box cars with 3/32 axles. A snug fit on the axle so that it doesn't fall off
-
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 24 pcs. - #M256
0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws. Easy open box of 24.
-
KOFORD SETUP FOR EUROSPORT MOTORS, EXTERNAL DIA. .620" (15.75 MM), HEIGHT .430" (10.9 MM), NICKEL-PLATED -#M652
SETUP FOR ASSEMBLY EUROSPORT MOTORS, NICKEL-PLATED
PARAMETERS:
- EXTERNAL DIA. .620" (15.75 MM)
- HEIGHT .430" (10.9 MM)
-
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 pc. - #M203T7-1
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 pc. - #M203T7-1
Lastest Pro design air kit with true .005" sidedams and .007" spoiler. For shorter cars
-
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 cd. (6 pc.) - #M203T7
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 cd. (6 pc.) - #M203T7
Lastest Pro design air kit with true .005" sidedams and .007" spoiler. For shorter cars
-
KOFORD DC POWER GRINDING/DRILL TOOL "MINICRAFT", 15V - #M413
Koford Grinder/Drill. Allow using all standard dremel style accessories, Runs off 12V power supply. Lightweight for easy storage and portability
-
-
KOFORD AXLE BEARING INSTALATION SPRING - M634
Coil spring for aligning axle bearings - Perfect rear axle bearing alignment - Slide over axle and slide through axle holes in chassis. Slide on bearings in place and square. Solder bearings from the inside of pillow blocks.
-
KOFORD PREMIUM BALLBEARING OIL - #M327
Premium BB oil.
Ultra high temp. synthetic oil with special antiwear and corrosion inhibitor additives. Oil formulation is selected to have the least detrimental effect iif excess gets on brushes. Treat your bearings to the best
-
KOFORD Mobile 1 racing oil - #M750
KOFORD Mobile 1 racing oil - #M750
Hi performance for ball bearings or oilites
-
KOFORD ISRA TECH TOOL - M674
ISRA tech tool - EDM cut and anodized
-
KOFORD S.B.F. II Horizontal motor brushes, pair - #M486
Traditional brushes for motor, they have a little more density, compared to brushes PROSLOR - #PS-901 accordingly more are erased, but the collector wears out more.
In ISRA classes motors it is customary to establish BIGFOOT brush on "+" and a brush manufactured by PROSLOT on "-". Thus, it is possible to achieve the most uniform wear of the brushes. Regardless of this, as practice shows, the plus brush should be changed 2 times more often.
-
KOFORD S.B.F. II premium horizontal brushes, 1 cd. ( 6 pr.) - #M485
KOFORD S.B.F. II premium horizontal brushes, 1 cd. ( 6 pr.) - #M485
S.B.F. II Horizontal brushes for 16D, Super 16D, Competitor, etc. The Worlds best motor brush, winner of countless World and National championships. These are the brushes which our M476 and M244 brushes are machined from.
-
KOFORD Premium horizontal SBF II brushes (for C12, G27) w/precision ground shunt slot, 1 cd. (6 pr.) - #M476
KOFORD Premium horizontal SBF II brushes (for C12, G27) w/precision ground shunt slot, 1 cd. (6 pr.) - #M476
Now shortened and ready to use. Use with M313 light tension or M276 heavy tension springs and M329 or M295 heat transfer compound.
-
KOFORD HARD PREMIUM BRUSHES BIGFOOT, VERTICAL, pair - #M244A
Hard premium brushes for vertical brush hoods, open and group classes
Prepared for installation in vertical brush hoods brushes.
-
KOFORD HARD PREMIUM BRUSHES BIGFOOT, VERTICAL, 6 pairs - #M244A
Hard premium brushes for vertical brush hoods, open and group classes
6 pairs prepared for installation in vertical brush hoods brushes packed in easy opened box.
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 40 DEG - #468-BOX-40
Tri-Star G12 arm .518 diameter 40° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 42 DEG - #468-BOX-42
Tri-Star G12 arm .518 diameter 42° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 44 DEG - #468-BOX-44
Tri-Star G12 arm .518 diameter 44° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 45 DEG - #468-BOX-45
Tri-Star G12 arm .518 diameter 45° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 46 DEG - #468-BOX-46
Tri-Star G12 arm .518 diameter 46° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 47 DEG - #468-BOX-47
Tri-Star G12 arm .518 diameter 47° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 48 DEG - #468-BOX-48
Tri-Star G12 arm .518 diameter 48° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.
-
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.
-
KOFORD Neo top gun C-Can drag magnets - #M596
KOFORD Neo top gun C-Can drag magnets - #M596
-
KOFORD SELF TAP MOTOR SCREWS, 4 pcs. - #M466-4
Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench.
Suitable for everyone plastic endbells, besides endbells CAHOZA
-
KOFORD SELF TAP MOTOR SCREWS, 24 pcs. - #M466
Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench. 24 psc.
Suitable for everyone plastic endbells, besides endbells CAHOZA
-
KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644
Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.
-
KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40
G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.
-
KOFORD ENBELL FOR SETUP KOFORD M652 UNDER ARMATURE W/RING - #M287L
ENBELL FOR SETUP KOFORD #M652 UNDER ARMATURE W/RING - #M287L
-
KOFORD Pinion 64 pitch, 12T, 0° angle, 2 mm bore, precision & hardened - #M323-12
KOFORD Pinion 64 pitch, 12T, 0° angle, 2 mm bore, precision & hardened - #M323-12
Precision plated and hardened pinions, available in 8,9,10,11,12,13, and 14 tooth. Plating eliminates rust and produces a stronger solder joint for less chance of spinning. Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only.
-
KOFORD Pinion 64 pitch, 13T, 0° angle, 2 mm bore, precision & hardened - #M323-13
KOFORD Pinion 64 pitch, 13T, 0° angle, 2 mm bore, precision & hardened - #M323-13
Precision plated and hardened pinions, available in 8,9,10,11,12,13, and 14 tooth. Plating eliminates rust and produces a stronger solder joint for less chance of spinning. Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only.
-
KOFORD Pinion 64 pitch, 14T, 0° angle, 2 mm bore, precision & hardened - #M323-14
KOFORD Pinion 64 pitch, 14T, 0° angle, 2 mm bore, precision & hardened - #M323-14
Precision plated and hardened pinions, available in 8,9,10,11,12,13, and 14 tooth. Plating eliminates rust and produces a stronger solder joint for less chance of spinning. Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only.
-
KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677
KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677
Pinned 9T 3° angled Black Diamond coated pinions for G7 racing. Coating reduces friction and prevents solder from flowing into teeth. Use with M636 pinion wire.
-
KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S
KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S
Black Diamond coated hardened 11 tooth straight pinion with boss. Coating reduces friction and prevents solder flowing into teeth.
-
KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11
KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11
Black Diamond coated hardened 11 tooth 5 degree angled pinion with boss. Coating reduces friction and prevents solder flowing into teeth.
-
KOFORD .010" (0.254 MM) PHOS BRONZE GUIDE WASHER, 6 pcs. - #M321
.010 thick Phosphorous Bronze guide washer. Use to adjust guide height Will not deflect like stacked Teflon® washers. Packaged 6 per bag.
-
KOFORD Teflon® spring insulation, 30 cm - #M267
KOFORD Teflon® spring insulation, 30 cm - #M267
Teflon® spring insulation, perfect fit on springs
-
KOFORD BRASS RETAINERS FOR .063 TUBING 1 pc. - #M536
Machined brass retainers (eyelets) for .063 tubing
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
KOFORD BRASS RETAINERS FOR .063 TUBING 24 pcs. - #M536
Machined brass retainers (eyelets) for .063 tubing 24 pieces in an easy open box
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
KOFORD Alligator clips, 1 set - #M176
KOFORD Alligator clips, 1 set - #M176
Solid copper alligator clips
-
KOFORD Controller boots, 1 set - #M748
KOFORD Controller boots, 1 set - #M748
Red, White and Black allligator boots