DUBICK Engineering
-
DUBICK gold plated guide clips with crimping for wires. Made for new RED FOX guides.(Fit for all other guides), 1 pair - #DB703
DUBICK gold plated guide clips with crimping for wires. Made for new RED FOX guides.(Fit for all other guides), 1 pair
-
DUBICK UHU CONTACT GLUE Schuh&Leder FOR TIRES, flacon 33 ml - #DB700
Excellent glue for tires, better than the "moment" and "88".
-
DUBICK Set #1 of 2 mm inside diameter aluminium tubes ( 5.5 mm (.22"), 6 mm (.24"), 6.5 mm (.26"), 7 mm (.28")) - #DB712
DUBICK Set of 2 mm inside diameter aluminium tubes - #DB712
In set 1 pc of each size: 5.5 mm (.22"), 6 mm (.24"), 6.5 mm (.26"), 7 mm (.28")
-
DUBICK Anodized spring cups / 3 coil springs - #716
DUBICK Anodized spring cups /3 coil springs
-
DUBICK Anodized spring cups / 5 coil springs - #717
DUBICK Anodized spring cups / 5 coil springs
-
DUBICK 3M reinforced strapping tape, linear reinforcement, 12 mm x 50 m
DUBICK 3M reinforced strapping tape, linear reinforcement, 12 mm x 50 m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBUCK Precision Ballbearing 2 х 5 х 2.5 mm, unshielded - #DB605
Ballbearing 2 х 5 х 2.5 mm, unflanged - #DB605
-
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
-
DUBICK Plastic box 75 х 132 х 16 mm (2.96" x 5.2" x 0.63") w/12 individual boxes - #DB214
DUBICK Plastic box 75 х 132 х 16 mm (2.96" x 5.2" x 0.63") w/12 individual boxes
- Material: plastic with transparent cover.
- Dimension, mm (in.): 75 х 132 х 16 mm (2.96" x 5.2" x 0.63").
- Quantity of sections, pcs.: 40.
- Small storage box for parts great for storing pinions etc.
-
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
-
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407
Brass pin tubing for chassis 10.8 mm -4/10 of an inch
-
DUBICK 4/40" x 1/8" set screws, bulk pack of 25 pcs. - #DB400
DUBICK 4/40" x 1/8" set screws, bulk pack of 25 pcs. - #DB400
Tire and gear size.
-
DUBICK AXLE Ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded, 7 balls, pair - #DB609
DUBICK AXLE Ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded, 7 balls, pair - #DB609
Flanged ballbearings for rear bridge
-
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #DB608
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #DB608
-
DUBICK Axle ballbearing 1/8" x 1/4" (3.15 mm x 6.35 mm), sheilded, flanged, pair - #DE719
DUBICK Axle ballbearing 1/8" x 1/4" (3.15 mm x 6.35 mm), sheilded, flanged, pair - #DE719
-
DUBICK Plastic box 104 х 175 х 22 mm (4.09" x 6.89" x 0.87") w/15 configurable sections - #DB215
DUBICK Plastic box 104 х 175 х 22 mm (4.09" x 6.89" x 0.87") w/15 configurable sections - #DB215
- Material: plastic with transparent cover.
- Dimension, mm (in.): 104 х 175 х 22 mm (4.09" x 6.89" x 0.87").
- Quantity of configurable sections, pcs.: 15.
- Plastic parts box like the DE214 but bigger
-
DUBICK Tweezers stainless steel, non-magnetic - #DB715
DUBICK Tweezers stainless steel, non-magnetic - #DB715
Perfect for work with small parts!
-
DUBICK Holder for the armatures & armatures in the tubes
DUBICK Holder for the armatures & armatures in the tubes
-
DUBICK Desktop organizer for working with small parts 3" x 4 1/2" x .4" (76,2 × 115 × 10 mm). Has a built-in magnet - #DB704
DUBICK Desktop organizer for working with small parts 3" x 4 1/2" x .4" (76,2 × 115 × 10 mm). Has a built-in magnet - #DB704
-
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK Traditional flat controller trigger - #726
DUBICK Traditional flat controller trigger - #DB726
Same as Parma finger trigger profile. Suitable for Parma, DiFalco or JK controllers. Has an additional brass tube for spring-loaded moving contact.
-
DUBICK SET OF STEEL PROBES FOR MEASUREMENT OF CLEARANCE, 20 pcs from 0,05 to 1 mm - #DB206
Thickness in set: - 0,05 mm/ 0,1 mm/ 0,15 mm/ 0,2 mm/ 0,25 mm/ 0,3 mm/ 0,35 mm/ 0,4 mm/ 0,45 mm/ 0,5 mm/ 0,55 mm/ 0,6 mm/ 0,65 mm/ 0,7 mm/ 0,75 mm/ 0,8 mm/ 0,85 mm/ 0,9 mm/ 0,95 mm/ 1 mm, respectively
The set is more than enough for the most detailed measurement of clearance!
-
DUBICK Panda 55,000 rpm 12V motor - #DB750
DUBICK Panda 55,000 rpm 12V motor - #DB750
Fast and reliable FK group motor.
55 turns 28 AWG wire
Carbon brushes. Short armature shaft.