CAHOZA
-
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A
-
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13
-
CAHOZA BRASS GUIDE CLIPS LONG, pair - #30
GUIDE CLIPS LONG - guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered onto the top side of the clip
-
CAHOZA BRASS GUIDE CLIPS SHORT, pair - #29
guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered through windows in guide
-
CAHOZA Brass guide clips short, pair - #333
CAHOZA Brass guide clips short, pair - #333
NEW!!!
These clips perfectly fit new long guide, manufactured from tough brass plate, thickness 0,25mm (.01"), lead wires are soldered through windows in guide
-
CAHOZA C CAN TYPE "UL" - #252
C-CAN TYPE UL
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate -
CAHOZA C-Can G12 motor - O - bevelled - #230B
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,2 grammes.
-
CAHOZA C-Can G12 motor - U - bevelled - #231B
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,1 grammes.
-
CAHOZA C-Can G12 motor - U - #231
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,1 grammes.
-
CAHOZA C-Can G12 motor - UL - #232
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19 grammes.
-
CAHOZA C-Can G12 motor - UL - bevelled - #232B
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18 grammes.
-
CAHOZA Commutator cup, 1 pc. - #150
CAHOZA Commutator cup, 1 pc.
Aluminium hard anodised commutator cups for G7, G27 and Scale armatures.
For using these cups it is needed to mill the commutator to dia 4,72mm (+0,01mm), in length 1,3mm
-
CAHOZA CUT DOWN GRAPHITE GUIDE, non thread - #28
CUT DOWN GRAPHITE NYLON GUIDE
cut down guide for integral guide tongue chassis, content: black nylon, glass fibre, graphite -
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
-
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
EDM pinions 64 pitch 7T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears
-
CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB
Cahoza C-can setup, assembled using:
- Cahoza C-can #252,
- Cahoza Tornado 5 bevelled magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- Cahoza screws,
- for .518" armatures, Koford ones are recommended,
- professionaly assembled,
- weight 10.8 grammes
-
CAHOZA G12 Motor type O - #235-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilites,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type O - #236-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type O -- GOLD - #237-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U - #235-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilites,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes