Tools (Misc)
-
INORS TAP 4/40"
TAP 4/40"
-
VITULA End mill bore 3/32" (2,36 mm) - #T1252
End mills are made from special high speed steel and they are sharpened of CNC grinder. End mills are mounted in duralumin grip. These tools are intended only for manual machining of soft material components, not for steel.
-
DUBICK SET OF STEEL PROBES FOR MEASUREMENT OF CLEARANCE, 20 pcs from 0,05 to 1 mm - #206
Thickness in set: - 0,05 mm/ 0,1 mm/ 0,15 mm/ 0,2 mm/ 0,25 mm/ 0,3 mm/ 0,35 mm/ 0,4 mm/ 0,45 mm/ 0,5 mm/ 0,55 mm/ 0,6 mm/ 0,65 mm/ 0,7 mm/ 0,75 mm/ 0,8 mm/ 0,85 mm/ 0,9 mm/ 0,95 mm/ 1 mm, respectively
The set is more than enough for the most detailed measurement of clearance!
-
LUCKY BOB GEAR PRESS - #LKY1000
GEAR PRESS (USED TO PRESS ON 7T THRU 11T GEARS)
-
JK Pinion gear puller T-Handle - #L17
JK Pinion gear puller T-Handle - #L17
Old catalog #JK8063
-
JK Heavy Duty Pinion Gear Puller - #L23
JK Heavy Duty Pinion Gear Puller - #L23
DELUXE GEAR PULLER has tighter pin and is harder than the previous version. Made from tool steel.
Old catalog #JK8062
-
ZHB SCISSORS MEDICAL STRAIGHT
SCISSORS MEDICAL STRAIGHT
Scissors for cutting models body and other things such as adhesive tape, lexan for strengthening, paper or cardboard. The best medical stanles steel!
-
PARMA ULTIMATE LEXAN SCISSORS - #10404
Utimate Body Scissors - Heavy duty 8" long scissors with 3.5" blades for cutting and trimming through thick RC bodies, wire, etc. No toolbox is complete without a set.
-
JConcepts Precision curved scissors, stainless steel blades, black handles - #2373
JConcepts Precision curved scissors, stainless steel blades, black handles
Cutting polycarbonate, soft plastic, soft rubber, fabric and thin paper products are what scissors are intended for.
-
WRIGHTWAY DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD
DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD
-
WRIGHTWAY DIAMOND CUTTING TOOLS, 15 pcs. - #WW26
DIAMOND CUTTING TOOLS, 15 pcs. - #WW26
15 pieces FITS MOST MOTO TOOLS
-
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #711
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #711
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
S&K F1 motor adjustment tool for offset crowns with 3/32" axle - #0103
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 3/32"
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 3/32" - DB#200-3/32-2
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 2 mm - DB#200-2-2
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.