Parts & Details for Build "TEAPOT" Models ZHB

Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov

Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 25
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 33
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  0.70 $

• 

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  0.95 $

• 

  ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*150 mm

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  0.80 $

• 

  ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*200 mm

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  1.05 $

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, w/drawing of the chassis parts

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
  • Scale: 1:24
  • Thick.: 1,5 mm w/foil
  • w/drawing of the chassis details

  1.50 $

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 2 mm w/out foil, w/drawing of the chassis parts

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
  • Scale: 1:24
  • Thick.: 2 mm w/out foil
  • w/drawing of the chassis details

  1.50 $

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, full cut details kit, ready for assembly by the rivets

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
  • Scale: 1:24
  • Thick.: 1,5 mm w/foil
  • full cut details kit, ready for assembly by the rivets

  
  

  2.99 $

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 2 mm w/out foil, full cut details kit, ready for assembly by the rivets

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
  • Scale: 1:24
  • Thick.: 2 mm w/out foil
  • full cut details kit, ready for assembly by the rivets

  2.99 $

• 

  ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  0.80 $

• 

  ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

  ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

  0.80 $

• 

  ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  0.80 $

• 

  ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

  ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

  1.10 $

• 

  ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  0.80 $