Controllers & Controller Parts

• 

  DenVel Electronics Innovative controller EVO-2

  Innovative controller EVO-2 from DenVel Electronics, new design

  Innovative controller EVO-2 by DenVel electronics.
  A lot of abslutly new moments below about few much important

  • controller is regulator electric current
  • 128 bands (speeds) - it make it really stable, soft and fast on corners
  • wire chock 25 position
  • Traction-control, By-pass,
  • Works with brushless motors,
  • Three type of brakes
  • Dual Brake function - facilitates control in bundles of turns
  • 6 cells of non-volatile memory by classes
  • Possibility to chose comfortable place for trigger
  • Adjustable trigger angle

  View Video instruction here

  665.27 ₤

• 

  DUBICK FANAT Electronic controller with banana plugs - #720BP

  DUBICK Electronic controller

  - suitable for all classes of models;
  - adjust the sharpness of the transistor;
  - high quality 30 amp transistor;
  - electronic CHOKE;
  - 30-speed gold-plated contact block;
  - bronze contacts for maximum speed and braking;
  - built-in voltmeter;
  - complete protection against incorrect switching on.

  193.55 ₤

• 

  DUBICK SEVEN-DIODES controller w/alligator clips - #727-7AC

  DUBICK SEVEN-DIODES controller w/alligator clips

  Variable brake for all motors up to 12 groups (Johnson, Hawk group, 16 & 12 group motors).

  100.33 ₤

• 

  DUBICK Adjustable DUBICK Fanat PRO controller chip

  DUBICK Adjustable DUBICK Fanat PRO controller chip

  31.60 ₤

• 

  DUBICK Electronic controller FANAT Pro

  DUBICK Electronic controller FANAT Pro

  -suitable for all classes of models;
  -antibrake, antibrake correction;
  -electronic CHOKE;
  -Slow Attach/ fast Attachk function (innovation!!!)
  -15 chips;
  -built-in voltmeter;
  -gold-plated contact block;
  -holders for track board;
  -Transistor Correction

  592.50 ₤

• 

  DUBICK Controller chip 29 Ohm for DUBICK Electronic controller - #722-29

  DUBICK Controller chip 29 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 58 Ohm for DUBICK Electronic controller - #722-58

  DUBICK Controller chip 58 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 78 Ohm for DUBICK Electronic controller - #722-78

  DUBICK Controller chip 78 Ohm for DUBICK Electronic controller 

  9.48 ₤

• 

  DUBICK Controller chip 95 Ohm for DUBICK Electronic controller - #722-95

  DUBICK Controller chip 95 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 113 Ohm for DUBICK Electronic controller - #722-113

  DUBICK Controller chip 113 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 144 Ohm for DUBICK Electronic controller - #722-144

  DUBICK Controller chip 144 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 194 Ohm for DUBICK Electronic controller - #722-194

  DUBICK Controller chip 194 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 238 Ohm for DUBICK Electronic controller - #722-238

  DUBICK Controller chip 238 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 290 Ohm for DUBICK Electronic controller - #722-290

  DUBICK Controller chip 290 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 319 Ohm for DUBICK Electronic controller - #722-319

  DUBICK Controller chip 319 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 348 Ohm for DUBICK Electronic controller - #722-348

  DUBICK Controller chip 348 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip 377 Ohm for DUBICK Electronic controller - #722-377

  DUBICK Controller chip 377 Ohm for DUBICK Electronic controller

  9.48 ₤

• 

  DUBICK Controller chip (custom resistance) for DUBICK Electronic controller

  DUBICK Controller chip (custom resistance) for DUBICK Electronic controller

  11.85 ₤

• 

  NEAN BLACK CONTROLLER HANDLE, small - #171

  Replacement controller handle for Controllers

  4.74 ₤

• 

  NEAN BLACK CONTROLLER HANDLE, big - #172

  Replacement controller handle for Electronic Controllers

  4.74 ₤

• 

  DIFALCO Orange controller handle w/hardware - #DD849

  Orange Lexan controller handle with hardware

  14.22 ₤

• 

  DIFALCO Clear Controller Handle with Hardware - #DD850

  DIFALCO Clear Controller Handle with Hardware

  14.22 ₤

• 

  DIFALCO Silver Metallic controller handle w/hardware - #DD851

  Silver Metallic Lexan controller handle with hardware

  14.22 ₤

• 

  DIFALCO Gray Metallic controller handle w/hardware - #DD852

  Gray Metallic Lexan controller handle with hardware

  14.22 ₤

• 

  DIFALCO Midnight Black Controller Handle w/Hardware - #DD854

  Black Lexan controller handle with hardware

  14.22 ₤

• 

  DIFALCO Candy Apple Red Controller Handle w/Hardware - #DD855

  Candy Apple Red Lexan controller handle with hardware

  14.22 ₤

• 

  DIFALCO Lemon Drop Metallic controller handle w/hardware - #DD856

  DIFALCO Lemon Drop Metallic controller handle w/hardware - #DD856

  14.22 ₤

• 

  DIFALCO Sky Blue Metallic Controller Handle w/Hardware - #DD857

  Sky Blue Metallic Lexan controller handle with hardware

  14.22 ₤

• 

  DIFALCO Key Lime Pie Metallic controller handle w/hardware - #DD858

  DIFALCO Key Lime Pie Metallic controller handle w/hardware - #DD858

  14.22 ₤

• 

  DIFALCO Sage Green Metallic controller handle w/hardware - #DD859

  Sage Green Metallic controller handle w/hardware - #DD859

  14.22 ₤

• 

  PARMA Turbo Controller Trigger Pin- #355BS

  Replacement Turbo Trigger Pin and Screw/Nut.

  1.58 ₤

• 

  DIFALCO Ballbearing kit w/trigger pin - #DD721

  DIFALCO Ballbearing kit w/trigger pin

  Ball Bearing Upgrade Kit w/ DD719 Trigger Pin - This kit adds our DD719 trigger pin to the above kit. This upgrade kit is for all brand controllers and our modules who want to upgrade to a ball bearing trigger. This is for Parma,3rd Eye,Ruddock,JG and any brand!

  12.62 ₤

• 

  PARMA TURBO NYLON TRIGGER - #355C

  Replacement nylon trigger for Turbo Controllers.

  6.31 ₤

• 

  JK CONTROLLER TRIGGER - #N9

  JK CONTROLLER TRIGGER - #N9 

  Controller trigger, Updated

  Old catalog #JK8083

  7.10 ₤

• 

  DUBICK Traditional flat controller trigger - #726

  DUBICK Traditional flat controller trigger - #DB726

  Same as Parma finger trigger profile. Suitable for Parma, DiFalco or JK controllers. Has an additional brass tube for spring-loaded moving contact.

  6.87 ₤

• 

  DUBICK Set of contacts for the controller. Made from brass and GOLD PLATED - #714

  DUBICK set of contacts for the controller. Made from brass and GOLD PLATED.

  Fit for Parma, Jk and RedFox controller triggers. Full analog Parma #355D TURBO CONTACTS & TERMINALS and fit for Parma turbo controller frame.

  9.48 ₤

• 

  PARMA CLEAR LEXAN CONTROLLER HANDLE - #360

  Replacement controller handle for all PARMA Controllers. Direct fit for Economy and Sebring controllers. Can be used for Turbo, Plus and Turbo Qualifier with modifications (top must be cut as original handle).

  7.89 ₤

• 

  JK CLEAR LEXAN CONTROLLER HANDLE (pair) - #N8

  JK CLEAR LEXAN CONTROLLER HANDLE (pair) - #N8 
  

  Controller Handle - This is a replacement for the Red Fox controller handle

  Old catalog #JK8080

  9.95 ₤

• 

  ZHB Ballbearing 3 х 7 х 3 mm flanged, 1 Pc. - #3х7х3F

  Ballbearing 3 х 7 х 3 mm flanged, 1 Pc. - #3х7х3F

  This ballbearing instalation in Controller trigger

  1.58 ₤

• 

  JK Controller Frame, Anodized Aluminum Black - #N20

  JK Controller Frame, Anodized Aluminum Black - #N20

  Old catalog #JK80812

  9.04 ₤

• 

  PARMA CONTROLLER HANDLE BOLT SET, 3 pcs. - #361

  One set of replacement hardware for all controllers handles

  0.92 ₤

• 

  JK CONTROLLER HANDLE BOLT SET - #JK80819

  JK CONTROLLER HANDLE BOLT SET - #JK80819

  Set of Controller handle screws 

  1.19 ₤

• 

  KOFORD CONTROLLER SPRINGS - #M371

  Controller springs for all Koford controllers

  0.55 ₤

• 

  PARMA CONTROLLER SPRING - #368

  Replacement trigger spring for PARMA Economy and Sebring Controllers.

  0.79 ₤

• 

  DUBICK Controller spring - #724

  DUBICK Controller spring - #724

  0.79 ₤

• 

  KOFORD Controller wiper button, 1 pc. - #M738

  Controller wiper button, 1 pc.

  Wiper button for all Koford controllers

  0.77 ₤

• 

  PARMA CONTROLLER WIPER ARM - #402

  Replacement brass wiper arm for all Economy/Sebring/Turbo Controllers

  0.75 ₤

• 

  JK Wiper arm with wiper button - #N4

  JK Wiper arm with wiper button

  Old catalog #JK80814

  2.28 ₤

• 

  PARMA 1/8" х 1/4" (3.15 х 6.15 MM) FLANGED OILITES, pair - #623S

  Replacement pair of Bushing Oilites for Turbo Controller Trigger (Requires one pair). Also for adding 1/8" diameter axle to slot car chassis with 1/4" hole.

  1.34 ₤

• 

  RED FOX Silver controller wiper button, 1 pc.

  RED FOX Silver controller wiper button, 1 pc.

  2.37 ₤

• 

  DIFALCO HD30 1/24 UPGRADE KIT - #DIF261

  HD30 Upgrade PCB: Convert your 10 or 15 band Pro Plus or Fanatic controller to our new 30 band high definition design. You get the HD30 circuit board with a standard 148 ohm network board installed. Simply unsolder a few wires and remove the old PCB. Transfer the original brake and sensitivity rheostats over to the new HD30 board. Now bolt the PCB to the frame and solder a few wires to their correct positions. Simple instructions included.

  48.98 ₤

• 

  DIFALCO TURBO BLAST BASIC. KIT - #DIF704

  40 amp (70 amp surge) high power relay installs easily on main wires. Includes instructions for all controllers as well as special parts and instructions for Difalco Design "E"Motion electronic controllers and modules. Text plus drawings make our kit easier to install than other brands! 

  11.77 ₤

• 

  ZHB BRAKE RHEOSTAT 4,7 OHM

  It is wound by plane nichrom. Used in controllers made by Nesterenko A.I. But, it can work with any electonic controller

  9.48 ₤

• 

  DIFALCO ADJUSTABLE BRAKE RHEOSTAT W/KNOB - #DIF806

  Brake Rheostat, pro, with knob, variable with off position, reducing washers. 

  42.66 ₤

• 

  DIFALCO PRO RHEOSTAT W/OFF POSITION - #DIF807

  Same as the 806 but with no knob

  39.50 ₤

• 

  DIFALCO POWER TRANSISTOR - #DIF830

  Power Transistor, large silver transistor used on all "E"Motion electronic controllers and modules

  13.43 ₤

• 

  DIFALCO SENSITIVITY RHEOSTAT FOR 1/24 - #DIF840

  Sensitivity rheostat replacement for all Difalco controllers

  11.06 ₤

• 

  ZHB "Banana" connector for controller, 1 pc.

  "Banana" connector for controller, 1 pc.

  1.19 ₤

• 

  KOFORD Alligator clips, 1 set - #M176

  KOFORD Alligator clips, 1 set - #M176

  Solid copper alligator clips 

  1.97 ₤

• 

  KOFORD Controller boots, 1 set - #M748

  KOFORD Controller boots, 1 set - #M748

  Red, White and Black allligator boots

  1.97 ₤

• 

  PARMA Turbo Controller - 4 OHM - #264

  PARMA Controllers have been the standard in performance since 1968. Their simplicity and durability means many years of dependable service. Resistors can be swapped easily to tailor your handling for different tracks and cars. Use for all 16D, Group 7, Group 12, Group 27 class racing. Turbo - Our most popular performance controller. Features an anodized Turbo Frame, double barrel resistor and 2 additional contact pads to ensure full brake and full power. Features clear handle, nylon trigger with oilites and 14 gauge wire, includes boots/clips.

  59.25 ₤

• 

  DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280

  DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280

  All the features of the DD270 with our traction control rheostat added. The traction rheostat reduces the amount of power available on the upper wiper bands to reduce sliding out and deslotting on the exit of turns. Extremely useful for scale cars as well as NASCAR type racing.

  243.32 ₤

• 

  S&K Adjustable Controller Chip (for S&K ELECTRONIC CONTROLLER #SK0101) 0-160 Ohm - #SK0107

  S&K Adjustable Controller Chip (for S&K ELECTRONIC CONTROLLER #SK0101)  0-160 Ohm

  31.60 ₤

• 

  S&K CONTROLLER CHIP (RESISTANCE UNDER THE ORDER)

  Controller chip for S&K ELECTRONIC CONTROLLER

  Contact us for choose necessary resistance

  Available for order (Om):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 22 Ohm - #SK0106-22

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 31 Ohm - #SK0106-31

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 43 Ohm - #SK0106-43

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 50 Ohm - #SK0106-50

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 60 Ohm - #SK0106-60

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 76 Ohm - #SK0106-76

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 90 Ohm - #SK0106-90

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 100 Ohm - #SK0106-100

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 110 Ohm - #SK0106-110

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 120 Ohm - #SK0106-120

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 148 Ohm - #SK0106-148

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 170 Ohm - #SK0106-170

  Also, available for order (Ohm) (contact us for details):

  11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170

  8.32 ₤

• 

  KOBIS RACING Controller model A3

  KOBIS RACING Controller model A3

  Anti-brake model controller.
  Suitable for all cars. Anti-Brake feature improves Open12 and Production 24 race performance

  New features in this version

  • Third generation Anti-Brake system
  • Improved power management system, voltage drop reduced to 0.04 V
  • New brake power control

  831.58 ₤

• 

  KOBIS RACING Controller model P1

  KOBIS RACING Controller model P1

  Professional model controller.

  Suitable for all cars. Wire choke feature improves control of cars power and smoothness.

  New features in this version

  • Wire choke. Choke resistance is adjusted by 16 position rotary switch.
  • Wire Choke controls cars power and smoothness.
  • Choke has a wide range of adjustment from 0 to 42 foot.
  • New power management system.
  • New Soft Brake adjustment

  1 164.21 ₤