Group-12 Motors & Parts

• 

  PROSLOT SPEEDFX X12 BALANCED MOTOR, W/CHEAP BALANCED ARMATURE- #PS3000

  Speed FX Group 12 Motor SRS C-Can - Black Endbell

  Great option for the beggining racers in Production 1/24. When the work time of cheap armature came out, you can set in this can more expensive armature.

  38.50 $

• 

  RED FOX C-can setup - #RFC0002

  RED FOX C-can setup - #RFC0002

  Only setup, without endbell, magnets, hardware & ball bearings.

  11.50 $

• 

  PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly - #PS-714 Pro-SRS

  PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly

  14.95 $

• 

  PROSLOT SMQ (SINGLE MAGNET QUADS) MATCHED MAGNETS FOR C-CANS, pair - #PS906

  SMQ (Single Magnet Quads) Matched Magnets for Proslot motors group 12.

  16.50 $

• 

  CAHOZA C CAN TYPE "UL" - #252

  C-CAN TYPE UL
  Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate

  39.00 $

• 

  PROSLOT MEGA III MATCHED MAGNETS FOR C-CANS (X-12), pair - #PS912

  MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long

  Selected tool magnets for C-cans (group 12 motors)

  23.00 $

• 

  PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP

  PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP

  11.95 $

• 

  PROSLOT SpeedFX X12 REPLACEMENT BALANCED ARMATURE - #PS3006

  FX X12 Replacement Balanced Armature (commutator trued)

  16.50 $

• 

  PROSLOT VIP C-CAN SETUP KIT W/O MAGNETS - #PS-749VIP

  C-can Setup kit (without magnets). Prepared set of C-CAN X-12, w/out magnets. The can looks like the photo.

  21.50 $

• 

  PROSLOT X-12 SRC C-CAN SETUP KIT W/OUT MAGNETS - #PS-749SRS

  X-12 SRC C-CAN SETUP KIT W/OUT MAGNETS

  21.50 $

• 

  PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38

  Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank

  69.75 $

• 

  PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42

   Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank

  69.75 $

• 

  PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45

   Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank

  69.75 $

• 

  KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B

  KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B

  Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.

  107.59 $

• 

  CAHOZA С-Can G12 motor - O - #230

  Cahoza C-can motor, assembled using:

  • "O" type C-can #250, 
  • Cahoza Tornado 2 magnets, 
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 19,2 grammes.

  100.70 $

• 

  CAHOZA C-Can G12 motor - O - bevelled - #230B

  Cahoza C-can motor, assembled using:

  • "O" type C-can #250, 
  • Cahoza Tornado 2 bevelled magnets #276,
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 18,2 grammes.

  105.70 $

• 

  MID-AMERICA DIAMOND HEAD SET UP KIT W/ BUSHINGS & MAGNETS - #MAR630

  Diamond Head C can set up Kit w/ Bushings C Can Set Up Very High Quality Set up kit with Magnets and brush springs

  67.99 $

• 

  TWP C-Can setup - #TWPKMB-012

  TWP C-Can setup - #TWPKMB-012

  Full setup kit for G12 (C-Can group) motor.

  68.50 $

• 

  CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB

  Cahoza C-can setup, assembled using:

  • Cahoza C-can #252, 
  • Cahoza Tornado 5 bevelled magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • Cahoza screws,
  • for .518" armatures, Koford ones are recommended, 
  • professionaly assembled, 
  • weight 10.8 grammes

  112.40 $

• 

  CAHOZA LIGHT PROFILE ENDBELLS - #257

  New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams

  7.00 $

• 

  KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606

  KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606

  Precision matched. Recommended for wing racing. 

  13.50 $

• 

  PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans) - #PS711

  PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans)

  7.50 $

• 

  S&K Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree. - #SKAX12-CUSTOM

  S&K Х-12 CUSTOM armature,  0.510 - 0.518 diam. Any degree.

  Avialable for special order 

  63.16 $

• 

  KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607

  KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607

  Matched .450 long x .155 thick C can magnets with new (stronger) orientation. Especially recommended for G12 wing car racing with the M528 can.

  13.50 $

• 

  VALIKO Armature Х-12 45º, 0.515" diam.

  VALIKO Armature Х-12 45º,  0.515" diam.

  100.00 $

• 

  VALIKO Armature Х-12 48º, 0.515" diam. (ISRA 2019 in UK oficial armature)

  Avialable for pre-order on end of December and first half of Janure 

  100.00 $

• 

  VALIKO Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree and long.

  Avialable for special order 

  100.00 $

• 

  PROSLOT ENDBELL KIT FOR PROSLOT C-CANS, W/BRUSH HOODS - #PS643

  Complete Endbell Kit - includes endbell, hardware, spring cups, oilite and screws

  17.00 $

• 

  PROSLOT C-Can assembled endbell (w/copper hardware) - #PS-618

  PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS-618

  24.95 $

• 

  PROSLOT X-12 ARM DIA .513", 38 DEGREE - #PS-701-38

  Box Stock X12 .513 38 degrees on M Blank

  48.50 $

• 

  PROSLOT X-12 ARM DIA .513", 42 DEGREE - #PS-701-42

  You can order any degree of advance.

  Box Stock X12 .513 42 degrees on M Blank

  48.50 $

• 

  KOFORD Ultrastrong radial C-Can drag magnets- #M592

  KOFORD Ultrastrong radial C-Can drag magnets

  Ultrastrong radial drag magnets, when used with M593 treated can produces 4% more flux then competitors wide can and .170 thick quad magnets without the problems of nonstandard size cans. .165 thick x .520 long

  29.95 $

• 

  B52 C-Can Combo magnets 0.167" thick, 0.458" long, type 1 (one side is flat one side is bevelled), pair

  B52 C-Can magnets, type 1, pair

  20.00 $

• 

  B52 C-Can Flat magnets 0.167" thick, 0.458" long, type 2 (both side is flat), pair

  B52 C-Can magnets, type 2, pair

  20.00 $

• 

  CAHOZA Single endbell for C-Cans (G-12) - #126

  CAHOZA Single endbell for C-Cans (G-12)

  Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171

  48.00 $

• 

  CAHOZA Assembled endbell for G12 C-Cans - #146

  CAHOZA Assembled endbell for G12 C-Cans

  New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes

  72.00 $

• 

  CAHOZA Assembled endbell for G12 C-Cans +4° rotation - #146-H4

  CAHOZA Assembled endbell for G12 C-Cans +4° rotation

  New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes

  72.00 $

• 

  PROSLOT Magnet Clips for C-cans,1 pc. - #PS640

  PROSLOT Magnet Clips for C-cans, 1 pc.

  This is the clips for all 12-group (C-cans) motors.

  0.30 $

• 

  PROSLOT HARDWARE FOR PROSLOT MOTORS X-12 GROUP, W/SPRING CUPS & SCREWS- #PS642

  Hardware set complete -includes hardware, oilite, spring cups and screws

  12.00 $

• 

  PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641

  Brush Hood & Heat Sink set

  11.00 $

• 

  CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272

  CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272

  0.75 $

• 

  CAHOZA TAPPING SCREWS, for T5 driver, 1 pc. - #273-1

  Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,

  1.00 $

• 

  CAHOZA TAPPING SCREWS, for T5 driver, 24 pc. - #273

  Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,

  18.00 $

• 

  B52 C-Can Bevelled magnets 0.167" thick, 0.458" long, type 3 (both side is bevelled), pair

  B52 C-Can magnets, type 3, pair

  20.00 $

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 38 DEG - #468-BOX-38

  Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  66.50 $

• 

  CAHOZA TORNADO 2 MAGNETS (C-CANS), 1 pair - #275

  NEW CAHOZA TORNADO 2 MAGNETS
  these magnets are produced from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic lines are radially oriented, height 14,15mm (.555"), length 11,5mm (.453"), thickness 3,85mm (.152"), weight 6,58 grammes, Tornado 2 magnets are marked with white dot, magnets are legal for USRA and ISRA

  10.20 $

• 

  CAHOZA TORNADO 2 (C-CANS) BEVELED MAGNETS, pair - #276

  NEW CAHOZA TORNADO 2 BEVELLED MAGNETS
  the same as #275 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA

  15.60 $

• 

  CAHOZA TORNADO 5 MAGNETS (C-CANS), 1 pair - #277

  CAHOZA TORNADO 5 MAGNETS
  these popular magnets are identical as #275 (Tornado 2 magnets) but specially recharged, selected for maximum strength and matched, weight 6,58 grammes, Tornado 5 magnets are marked with yellow dot, magnets are legal for USRA and ISRA

  12.80 $

• 

  CAHOZA ALUMINUM HARD NICKEL BRUSH HOODS, set - #266

  ALUMINIUM NICKEL PLATED BRUSH HOODS
  hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise

  7.60 $

• 

  CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266

  CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266

  hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling

  40.00 $

• 

  CAHOZA PROF GOLD PLATED BRUSH HOODS, set - #268

  NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
  total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise

  20.00 $

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 40 DEG - #468-BOX-40

  Tri-Star G12 arm .518 diameter 40° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  57.50 $

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 42 DEG - #468-BOX-42

  Tri-Star G12 arm .518 diameter 42° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  66.50 $

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 44 DEG - #468-BOX-44

  Tri-Star G12 arm .518 diameter 44° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  57.50 $

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 45 DEG - #468-BOX-45

  Tri-Star G12 arm .518 diameter 45° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  66.50 $

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 46 DEG - #468-BOX-46

  Tri-Star G12 arm .518 diameter 46° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  66.50 $

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 47 DEG - #468-BOX-47

  Tri-Star G12 arm .518 diameter 47° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  66.50 $

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 48 DEG - #468-BOX-48

  Tri-Star G12 arm .518 diameter 48° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  57.50 $

• 

  KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12

  KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12

  Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.

  71.80 $

• 

  KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12

  KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12

  Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.

  71.80 $

• 

  CAHOZA TORNADO 5 (C-CANS) BEVELLED MAGNETS, pair - #278

  NEW CAHOZA TORNADO 5 BEVELLED MAGNETS
  the same as #277 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA

  21.60 $

• 

  KOFORD Neo top gun C-Can drag magnets - #M596

  KOFORD Neo top gun C-Can drag magnets - #M596

  49.95 $

• 

  CAHOZA C-Can G12 motor - U - #231

  Cahoza C-can motor, assembled using:

  • "U" type C-can #251, 
  • Cahoza Tornado 2 magnets, 
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 19,1 grammes.

  103.70 $

• 

  CAHOZA C-Can G12 motor - U - bevelled - #231B

  Cahoza C-can motor, assembled using:

  • "U" type C-can #251, 
  • Cahoza Tornado 2 bevelled magnets #276,
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 18,1 grammes.

  108.70 $

• 

  CAHOZA C-Can G12 motor - UL - #232

  Cahoza C-can motor, assembled using:

  • "UL" type C-can #252, 
  • Cahoza Tornado 2 magnets, 
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 19 grammes.

  108.70 $

• 

  CAHOZA C-Can G12 motor - UL - bevelled - #232B

  Cahoza C-can motor, assembled using:

  • "UL" type C-can #252, 
  • Cahoza Tornado 2 bevelled magnets #276,
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 18 grammes.

  113.70 $

• 

  CAHOZA G12 Motor type O - #235-O

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilites, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,2 grammes

  137.40 $

• 

  CAHOZA G12 Motor type U - #235-U

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #251, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilites, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,1 grammes

  140.40 $

• 

  CAHOZA G12 Motor type O - #236-O

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,2 grammes

  149.40 $

• 

  CAHOZA G12 Motor type U - #236-U

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #251, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,1 grammes

  152.40 $

• 

  CAHOZA G12 Motor type UL - #236-UL

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #252, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19 grammes

  167.40 $

• 

  CAHOZA G12 Motor type UL - bevelled - #236-ULB

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #252, 
  • Cahoza Tornado 5 beveled magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled,
  • weight 18.9 grammes

  172.40 $

• 

  CAHOZA G12 Motor type O -- GOLD - #237-O

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250,
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #263, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,2 grammes

  169.80 $

• 

  CAHOZA G12 Motor type U -- GOLD - #237-U

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #251,
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #263, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,1 grammes

  172.80 $

• 

  CAHOZA G12 Motor type UL -- GOLD - #237-UL

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #252,
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #263, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19 grammes

  187.80 $

• 

  CAHOZA G12 Motor type UL -- BLUEPRINTED- #237-ULB

  Cahoza C-can motor, assembled using:

  • Cahoza UL C-can #252,
  • Cahoza Tornado 5 beveled magnets, 
  • Cahoza #263 plastic endbell with gold plated hardware, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 18.9 grammes

  193.80 $

• 

  CAHOZA PROFI G12 Motor type O - #238-O

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza aluminium endbell #146, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19 grammes

  188.80 $

• 

  CAHOZA PROFI G12 Motor type O - bevelled - #238-OB

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250, 
  • Cahoza Tornado 5 beveled  magnets, 
  • Cahoza aluminium endbell #146 with gold plated hardware, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 18.8 grammes

  203.80 $

• 

  CAHOZA PROFI G12 Motor type U - #238-U

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #251, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #146, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 18,9 grammes

  191.80 $

• 

  CAHOZA PROFI G12 Motor type UL - #238-UL

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #252, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #146, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 18,8 grammes

  206.80 $

• 

  CAHOZA ALUMINUM SPRING CUPS (C-CANS), pair - #270

  ALUMINIUM SPRING CUPS diameter for springs is 3,55mm (.180"), length is 2mm, springs are perfectly fastened and don't loose at all

  1.50 $

• 

  PROSLOT TORX 5 SCREW FOR ENDBELLS & BRUSH HOODS, 1 pc. - #PS717

  1 self starting T5 Torx can and endbell screws

  0.30 $

• 

  KOFORD SELF TAP MOTOR SCREWS, 4 pcs. - #M466-4

  Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench.

  Suitable for everyone plastic endbells, besides endbells CAHOZA

  1.28 $

• 

  KOFORD SELF TAP MOTOR SCREWS, 24 pcs. - #M466

  Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench. 24 psc.

  Suitable for everyone plastic endbells, besides endbells CAHOZA

  7.68 $

• 

  TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16

  These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.

  0.30 $

• 

  TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16

  These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.

  1.20 $