Gears ZHB

Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov

Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.

• 

  CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#230

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA - CAH#6-AG

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K 72 PITCH 39T, 0° angle, 3/32" axle, Ø14.3 мм, glued on 3/32" Proslot axle - ZHB#223

  he hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#229

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm - CAH#6-AG

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K ES32 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm, glued on 2 mm KOFORD axle - ZHB#222

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA ES32 or ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#228

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• RED FOX 80 PITCH 43T, 0° angle, 2 mm axle, Ø14.35 mm glued on 2 mm axle KOFORD - ZHB#203

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• S&K Gear 80 PITCH 43T, 0° angle, 2mm axle, Ø14.3 mm glued on 2 mm axle KOFORD - ZHB#201

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#204

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• JK 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#205

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  HORKY BIG HUB 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#206

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#207

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K Gear 72 pitch 42 teeth, 0° angle, 3/32" axle, Ø15.46 mm glyed on Proslor axle - #225

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• S&K 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.3 mm glued on 3/32" axle ProSlot - ZHB#210

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  12.00 $

• VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB#211

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  12.00 $

• VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB_#211

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  12.00 $

• JK 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.28 mm glued on 3/32" axle ProSlot - ZHB#212

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  12.00 $