Gears S&K
-
S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722
S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722
-
S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172
S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172
-
S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722
S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722
-
S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm - #SK43802
S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm - #SK43802
-
S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm, for gluing - #SK43802G
S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm, for gluing - #SK43802G
-
S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm - #SK4380
S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm - #SK4380
-
S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm, for gluing - #SK4380G
S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm, for gluing - #SK4380G
-
S&K Gear 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm- #SK44802
S&K Gear 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm- #SK44802
-
S&K Crown gear, hypoid 72 pitch 30 teeth , offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - S&K#Offset 0.5mm - #SK30722
S&K Crown gear, hypoid 72 pitch 30 teeth , offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - S&K#Offset 0.5mm - #SK30722R
This gear used in Formula 1/32.
But, when you set this gear you need use special tool (tool for set motor on F1 with down offset 0.5 mm)
-
S&K Gear 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm - #SK4480
S&K Gear 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm - #SK4480
-
S&K GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm - #SK3864
S&K GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm - #SK3864
-
S&K GEAR 64 PITCH, 37T, 16° angle, 3/32" axle, Ø15.47 mm - #SK3764A
S&K GEAR 64 PITCH, 37T, 16° angle, 3/32" axle, Ø15.47 mm - #SK3764A
-
S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272
S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272
-
S&K Gear 80 PITCH, 45T, 0° angle, 2 mm axle, Ø14,9 mm - #SK45802
S&K Gear 80 PITCH, 45T, 0° angle, 2 mm axle, Ø14,9 mm - #SK45802
-
S&K Crown gear 72 pitch 33 teeth, offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - #SK3372
S&K Crown gear 72 pitch 33 teeth, offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - #SK3372R
This gear used in Formula 1/32
-
S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #SK4580
S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #SK4580
-
S&K Gear 72 pitch 44 teeth, 16° angle, 3/32" axle, Ø15.8 mm - #SK4472A
S&K Gear 72 pitch 44 teeth, 16° angle, 3/32" axle, Ø15.8 mm - #SK4472A
-
S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, for gluing - #SK4580G
S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, for gluing - #SK4580G
-
S&K GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.02 mm - #SK3964
S&K GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.02 mm - #SK3964
-
S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)
S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)
This gear is made for pressing on the axle!
You can pressed-on more thick axle, if you deploy the fitment hole
-
S&K GEAR 48 PITCH, 40T, 3/32" axle, (Ø21 mm)
S&K GEAR 48 PITCH, 40T, 3/32" axle, (Ø21 mm)
-
S&K GEAR 64 PITCH, 49T, 0° angle, 3/32" axle, Ø20.4 mm - #G64349
The long-awaited anologue of 45 teeth gear from Horky. Maximal quantity of teeth for TEAPOT models in St.Petersburg, in which definite the min. diameter of rear wheels (22 mm) and height of rear axle - 11.5 mm.
Also, this gear perfect to GM-class.