Equipment
-
KOLHOZA PIT BOX - KZA004
Pit Caddy for holding tires, traction, tools etc
-
KOLHOZA BODY CUTTING TOOL - KZA002
Professional tool for easy & smooth cutting of the body
-
KOLHOZA GUIDE TOOL - KZA001
Guide threading & Guide sanding tool in one
-
KOLHOZA SLOT CAR BOX "SPORTSMAN WORKING PLACE" - #KZA005
Includes travel bag with wheels.
Width - 430 mm (17,3"); Height - 310 mm (12,6"); Depth - 195 mm (7,87")
All small boxes, as in the photo, are included. This sizes are good to the norms of hand luggage, so you can take the box to the cabin, which is very convenient for travels. There is no built-in lighting. All box have department for 1/32 and 1/24 models and for tools.
Cost of delivery are discussed individually
-
Neotron stend for dynamic balance all types of slot car armatures. Tolerance till 0,0001 gr.
Stend for dynamic balance all types of slot car armatures.
Tolerance till 0,0001 gr.
-
PARMA Phenolic heat resistant tech block recessed for guide & tires - #MID414
PARMA Phenolic heat resistant tech block recessed for guide & tires - #MID414
-
DUBICK TECH BLOCK WITH MAGNETS - #DB205
DUBICK TECH BLOCK WITH MAGNETS - #DB205
Textolite tech block for models with fixed samarium-cobalt magnets. It is made with a cut zone of guide and rear wheels. Has an even working plane.
-
-
DenVel electonics Stand for magnets tests - #MT1
Stand for magnets tests. Indispensable in the selection of magnets.
Link to video review: https://www.youtube.com/watch?v=BKBSmt1xII0&fbclid=IwAR1v2R-puybfh6tBgDQ9Ikzc71XbZAT54pEDwZyqWieqYR6AtgYRkHFv_UE
-
DenVel electonics Stand for magnets tests, w/external sensor, v.2 - #MT v2
Magnet tester #MT v2 - a device for measuring the magnetic field strength of magnets.
-
KOLHOZA CAR BALANCER - KZA007
With this car balancer you can get your car balanced to perfection. With a front and two rear scales you can adjust your chassis front to back or right to left.
-
DenVel Multitool v.2: measure magnets magnetic field & rotor resistance
DenVel Multitool v.2: measure magnets magnetic field & rotor resistance
-
MS-SLOTPARTS Armature timing gauge (ext. version) (special order)
MS-SLOTPARTS Armature timing gauge (ext. version) (special order)
This gauge is used to accurately measure the timing of slot car motor armatures.
-
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
-
MS-SLOTPARTS Static balancer tool for balancing the hubs and gears of slot cars. Includes 3/32 " & 2 mm axles and storage box.
Static balancer tool for balancing the hubs and gears of slot cars.
Includes 3/32 " & 2 mm axles and storage box.
-
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
-
KOLHOZA AXLE AND PINION CHECKER - KZA009
Deluxe Axle and pinion gear checker. Checks to make sure they are straight.
-
DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0
DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0
-
KOLHOZA REAR WHEEL CUTTER Ø20MM - KZA010
Wheel well cutting tool - cuts rear wheel well at 20mm
-
KOLHOZA STAND FOR AXLE WITH GEARS - KZA020
Stand for axles with gears ready for quick replacement. Holds up to 10 axles with gears. Use for storage or to keep replacements ready for quick change
-
KOLHOZA REAR WHEEL CUTTER Ø22MM - KZA0101
Wheel well cutting tool - cuts rear wheel well at 22mm
-
KOLHOZA WHEEL STAND - KZA012
Wheel stand is for holding any kind of tires.
-
KOLHOZA Rear wheel cutter Ø24 mm - #KZA010-24
KOLHOZA Rear wheel cutter Ø24 mm - #KZA010-24
Wheel well cutting tool - cuts rear wheel well at 24 mm
-
KOLHOZA Rear wheel cutter Ø26 mm - #KZA010-26
KOLHOZA Rear wheel cutter Ø26 mm - #KZA010-26
Wheel well cutting tool - cuts rear wheel well at 26 mm
-
MG Digital clearance measuring tool
MG Digital clearance measuring tool
Convenient tool for tech inspection! Precision digital measures. Deepening for guide. It's possible to measure in mm or inches and adjustable zero point.
-
KOLHOZA ALUMINUM STAND FOR TIRE BOTTLES JK Ø23.5 mm (JK, Alpha), 80 х 140 mm - KZA013
An aluminum tire stand for tires with larger size bottles (usually 13/16 to 7/8" size). Fits 11 pairs of tires.
-
MS-SLOTPARTS Tire rack (special order)
MS-SLOTPARTS Tire rack (special order)
A tire rack of luxury class, ultra light, foldable.
This tire rack impresses with its construction and the material used and ensures order in the tire bearing
By folding the individual rows, it can be stored in a space-saving manner.
-
KOLHOZA ALUMINUM STAND / TIRE BOTTLES PARMA Ø27 mm (PSE, Alpha Large), 80 х 195 mm - KZA0131
Aluminum Tire Stand for tires with the smaller diameter tube. Usually .790 and smaller
-
KOLHOZA GUIDE SANDING TOOL - KZA011
Guide sanding tool
-
KOLHOZA STAND WITH PIT-BOX - KZA014
Stand for model with pit box is a very comfortable thing, when your're going to the track for practice
-
KOLHOZA STAND FOR NEW DONUTS - KZA015
On this stand your can place 17 pairs of new donuts. Used for storage in the orderliness
-
ZHB Desktop mat for work, dimensions 600 x 450 x 2.9 mm (A2 format)
- Size: 600 x 450 x 2.9 mm (A2).
- Thickness: 2.9 mm.
- Colour: green.
- The table mat is made from high durable PVC.
-
KOLHOZA AXLE CHECKER MACHINE - KZA017
Check to make sure your axles are perfectly straight
-
KOLHOZA CUTTING TUBING STAND - KZA018
With this tubing cutting jig you can make clean cuts of your tubing and cut multiple pieces to the exact same length
Video instruction for use:
https://www.facebook.com/video.php?v=548989248562024&set=vb.100003528612947&type=2&theater
-
ZHB MAGNETIC TRAY FOR STORAGE SMALL PARTS ON WORKTABLE
MAGNETIC TRAY FOR STORAGE SMALL PARTS ON WORKTABLE
Very need thing on your work tables! This tray can eliminate lose & drop on the floor small parts, such as screws, pinions & others.
-
KOLHOZA TABLE DRILL - KZA019
Created for shortening allen screws for fixing rims & gears.
Also, you can cut wire dia. untill 3 mm & square tubes made from: brass, copper, aluminum, stainless steel
-
KOLHOZA MAGNETIC STATIC WHEEL BALANCER - KZA021
Magnetic Static Wheel Balancer - Includes 3/32 " & 2 mm axles and storage axis knob
-
KOLHOZA AXLE 2 mm FOR MAGNETIC STATIC WHEEL BALANCER (KZA021) - KZA0211
Reserve axle 2mm for MAGNETIC STATIC WHEEL BALANCER (KZA021). It is possible to make the length until 52 mm
-
KOLHOZA AXLE 3/32" FOR MAGNETIC STATIC WHEEL BALANCER (KZA021) - KZA0212
Reserve axle 3/32" for MAGNETIC STATIC WHEEL BALANCER (KZA021). It is possible to make the length until 57 mm
-
KOLHOZA ARMATURE AXLE CHECKER MACHINE - KZA022
For testing the straightness of you axles and armatures
-
KOLHOZA ELECTRONIC SPRING TENSION TOOL - KZA026
ELECTRONIC SPRING TENSION TOOL - For Measuring the tension of motor springs
-
-
KOFORD DC POWER GRINDING/DRILL TOOL "MINICRAFT", 15V - #M413
Koford Grinder/Drill. Allow using all standard dremel style accessories, Runs off 12V power supply. Lightweight for easy storage and portability
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
PARAMETERS
- Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 88x17
- Material: acrylic
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
PARAMETERS
- Dia. of wheels bottles, mm: 27 (PSE, Alpha Large)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 103x137
- Material: acrylic
-
-
ZHB STAND SLOTLAB #TCS_Alpaha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic
STAND SLOTLAB #TCS_Alpaha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic
PARAMETERS
- Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Quantity of bottles, pcs: 12
- Size, mm: 88x17
- Material: acrylic
-
PARMA FASKOLOR F-1 AIRBRUSH - #40260
PARMA FASKOLOR F-1 Dual Action Airbrush is designed with a medium tip which delivers a smooth spray and broad range of fine to heavy coverage. The dual action trigger is easy to use (push down for air, pull back for paint) and achieve great results for the beginner to seasoned body painter. The FASKOLOR Bottle Adaptor makes it easy to plug a paint bottle into the airbrush for quick coverage and ease of use (this requires 40-50lbs of air pressure. We suggest also purchasing our 1/4 Oz Color Cup #40278 for spraying or mixing small amounts of paint. The Color Cup also requires less air pressure for finer lines and faster clean up. This kit includes an Airbrush, Air Hose with 3/8" Brass Compressor Adaptor, Airbrush Holder, Bottle Adaptor and Mixing Bottle (not shown). All replacement parts are available. Made in USA
-
PARMA FASKOLOR F-1 PRO DUAL ACTION - #40260GF
Our FASKOLOR F-1 Dual Action Airbrush is designed with a medium tip which delivers a smooth spray and broad range of fine to heavy coverage. The dual action trigger is easy to use (push down for air, pull back for paint) and achieve great results for the beginner to seasoned body painter. The FASKOLOR Bottle Adaptor makes it easy to plug a paint bottle into the airbrush for quick coverage and ease of use (this requires 40-50lbs of air pressure. We suggest also purchasing our 1/4 Oz Color Cup #40278 for spraying or mixing small amounts of paint. The Color Cup also requires less air pressure for finer lines and faster clean up. This kit includes an Airbrush, Air Hose with 3/8" Brass Compressor Adaptor, Airbrush Holder, Bottle Adaptor and Mixing Bottle (not shown). All replacement parts are available. Made in USA
-
ZHB SET OF 2 AIRBRUSHES & PARTS TO THEM
SET OF 2 AIRBRUSHES & PARTS TO THEM
Use this airbrushes with high quality paints, you can paint your bodies at home & win beauty contest:)
-
KOLHOZA Slot car box "Sportsman working place" - #KZA042
KOLHOZA Slot car box "Sportsman working place"
Width - 455 (+/- 10-20 mm)
Height - 330 (+/- 10 - 20 mm)
Depth - 190 (+/- 10-20 mm)Height on the stands: 380 mm, on the wheels: 455 mm
-
KOLHOZA Slot car box "Sportsman working place" - #KZA043
KOLHOZA Slot car box "Sportsman working place"
Width - 420 (+/- 10-20 mm) - 16.53" (+/- .39"- .78")
Height - 330 (+/- 10 - 20 mm) - 12.99" (+/- .39"- .78")
Depth - 200 (+/- 10-20 mm) - 7.87" (+/- .39"- .78")