Bodies, Stickers, Pins, Body Tape, Bulletproofing & Accesories
Внимание! Любой кузов (кроме кузовов RED FOX) может быть выполнен из пленки ПВХ или Lexan (поликарбонат) по предварительному заказу
-
TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
Very convenient stickers for preparing your bodies for the passage of a technical commission
-
DOSLOT Sticker Racing Numbers Isra, 3 e.a.
DOSLOT Sticker Racing Numbers Isra, 3 e.a.
Sheet length 115 mm (4.527"), numbers heigh is 7.6 mm (.299")
-
RED FOX Clear body Production 1/24 Mercedes ISRA (ISRA 2026), lexan, thickness .007" (0.175 mm), w/paint masks - #RFISRAPROD26-007
RED FOX Clear body Production 1/24 Mercedes ISRA LEGAL FOR ISRA 2026
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
DUBICK Reinforcement tape for pin hole, 30 x 180 mm (1,18" x 7,1") - #707
DUBICK Reinforcement tape for pin hole, 30 x 180 mm (1,18" x 7,1") - #707
-
RED FOX EUROSPORT 1/24 AUDI 2019-2025 ISRA LEGAL BODY, lexan, thickness .005" (0.125 mm) - #RFAUDIISRA19
EUROSPORT 1/24 Audi 2019-2021 ISRA LEGAL Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- ISRA legal body for 2019-2021 years
-
RED FOX Clear Body Formula 1/32 Ferrari F1 HALO (ISRA 2023 - 2026), Lexan .005" (0.125 mm) - #RFF1ISRA23
RED FOX Clear Body Formula 1/32 Ferrari F1 HALO LEGAL FOR ISRA 2023-2026
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
DOSLOT Sticker Front Wheels, set for 10 bodies
DOSLOT Sticker Front Wheels, set for 10 bodies
Front wheels sticker diameter is 13.2 mm (.520")
-
DOSLOT Sticker Delta Plastic Hyundai, set for 1 body
DOSLOT Sticker Delta Plastic Hyundai, set for 1 body
Sheet length 40 mm (1.575")
-
DOSLOT Sticker Attan Tesla, set for 1 body
DOSLOT Sticker Attan Tesla, set for 1 body
Sheet length 105 mm (4.134"), front wheels sticker diameter is 13.2 mm (.520")
-
DOSLOT Sticker Redfox Audi R10 1/24, set for 1 body
DOSLOT Sticker Redfox Audi R10 1/24, set for 1 body
Sheet length 70 mm (2.756"), front wheels sticker diameter is 13.2 mm (.520")
-
DOSLOT Stickers F1 "Petronas", set for 1 body
DOSLOT Stickers F1 "Petronas", set for 1 body
-
NeAn INTERIOR FOR "TEAPOT" 1/24 BODIES, Lexan, thickness 0.125 mm - #100-L
INTERIOR FOR "TEAPOT" 1/24 BODIES
-
ZHB LANE STICKERS, set for race
ZHB LANE STICKERS, set for race
Lane stickers for model, from 1 to 8 lane
-
DOSLOT Sticker Redfox Audi R10 1/32, set for 1 body
DOSLOT Sticker Redfox Audi R10 1/32, set for 1 body
Sheet length 60 mm (2.362"), front wheels sticker diameter is 13.2 mm (.520")
-
CHAMPION Clear Body 4.5" Dirt Late Model, Lexan .015" (0.381 mm) - #CHA251C
CHAMPION Clear Body 4.5" Dirt Late Model
- Made from: Polycarbonate (Lexan)
- For: 4.5"
- Thickness: .015" (0.381 mm)
- Clear body
-
CHAMPION Clear Body 4.5" Offset Late Model, Lexan .015" (0.381 mm) - #CHA252C
CHAMPION Clear Body 4.5" Offset Late Model
- Made from: Polycarbonate (Lexan)
- For: 4.5"
- Thickness: .015" (0.381 mm)
- Clear body
-
B52 Clear body Production 1/24 Ferrari FXX, Lexan .007" (0.175 mm) - #B52PP517
Clear body Production 1/24 Ferrari FXX
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
OLEG Body Production 1/24 Mclaren 650S GT3, Lexan .007" (0.175 mm), with paint mask - #0119
Body Production 1/24 Mclaren 650S GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
DOSLOT Stickers F1 "Brawn", set for 1 body
DOSLOT Stickers F1 "Brawn", set for 1 body
-
CHAMPION Clear body 1/24 Porsche with wings, Lexan .007" (0.175 mm) - #CHA281
CHAMPION Clear body 1/24 Porsche with wings
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale (4")
- Thickness: .007" (0.175 mm)
- Clear body
-
JK Clear body 4" Lamborghini SC63 GTP, Lexan .007" (0,175 mm) - #B169A
JK Clear body 4" Lamborghini SC63 GTP - #B169A
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale (4")
- Thickness: .007" (0.175 mm)
- Clear body
-
JK Clear body 4" Audi RSC 99, Lexan .005" (0,125 mm) - #B86X
JK Clear body 4" Audi RSC 99 - #B86X
- Made from: Polycarbonate (Lexan)
- For: 4"
- Thickness: .005" (0.125 mm)
- Clear body
Old catalog #JK7182
-
OLEG Body Production 1/24 Mclaren 650S GT3, Lexan .005" (0.125 mm), with paint mask - #0119T
Body Production 1/24 Mclaren 650S GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
OLEG Body 1/24 Chevrolet Pick-Up (1951) thin .007” (0.175 mm), with paint mask - #0120
Body 1/24 Chevrolet Pick-Up (1951)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007” (0.175 mm)
-
RALPH THORNE Clear Body 1/24 High down force ORCA, Lexan .007" (0.175 mm) - #ORCAHD007
RALPH THORNE Clear Body 1/24 High down force ORCA
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body
-
CHAMPION Clear Body 1/24 4" Buick Regal IMSA Stock Car 1985, Lexan .007" (0.175 mm) - #CHA331GC
CHAMPION Clear Body 1/24 4" Buick Regal IMSA Stock Car 1985
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body w/paint masks
-
RALPH THORNE Clear Body 4" Evolution dirt late modified, Lexan .007" (0.175 mm) - #1278A
RALPH THORNE Clear Body 4" Evolution dirt late modified, Lexan .007" (0.175 mm) - #1278A
- Made from: Polycarbonate (Lexan)
- For: 4"
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 4" Titan Stock Car, Lexan .005" (0.125 mm) - #TITAN005
RALPH THORNE Clear Body 1/24 4" Titan Stock Car
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .005" (0.125 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 4" Titan Stock Car, Lexan .007" (0.175 mm) - #TITAN007
RALPH THORNE Clear Body 1/24 4" Titan Stock Car
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 4" Titan COT Stock Car, Lexan .007" (0.175 mm) - #TITANCOT007
RALPH THORNE Clear Body 1/24 4" Titan COT Stock Car
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body
Bigger rear wing then the Titan
-
BPA Clear Body Eurosport 1/24 BMW LMR, Lexan .005" (0.125 mm), with paint mask - #K 021-005
BPA Clear Body Eurosport 1/24 BMW LMR
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
RED FOX Clear Body 1/24 4" Bettle Wing HD, Lexan .007" (0.175 mm) - #RFSC48C
RED FOX Clear Body 1/24 4" Bettle Wing HD
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body
-
KOLHOZA 1/24 Custom painted car interior, blue, thin .005" (0,125 mm) - #0126-blue
KOLHOZA 1/24 Custom painted car interior, blue, thin .005" (0,125 mm) - #0126-blue
-
OLEG Body Production1/24 AUDI RS5 DTM thin .005” (0.125 mm), with paint mask - #0121T
Production 1/24 Audi body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,125
- with paint mask
-
OLEG Body Production1/24 AUDI RS5 DTM thin .007” (0.175 mm), with paint mask - #0121
Production 1/24 Audi body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,175
- with paint mask
-
KOFORD BIG HEAD PRO BODY PINS, 48 psc. in tube - #M376
Big head pro body pins. Ideal length for bending over on swing over front body mounts, or for use on with full width body mounts. Custom made just for us, the best on the market. 48 pins per package.
-
RALPH THORNE Clear Body 1/24 GTP Revolution, Lexan .007" (0.175 mm) - #REVOLUTION007
RALPH THORNE Clear Body 1/24 GTP Revolution
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 GTP Warrior, Lexan .005" (0.125 mm) - #WARRIOR005
RALPH THORNE Clear Body 1/24 GTP Warrior, Lexan .005" (0.125 mm) - #WARRIOR005
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .005" (0.125 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 GTP Warrior, Lexan .007" (0.175 mm) - #WARRIOR007
RALPH THORNE Clear Body 1/24 GTP Warrior, Lexan .007" (0.175 mm) - #WARRIOR007
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear 1/24 TOYOTA CELICA TURBO 4WD, Lexan, thickness .01" (0.25 mm), w/paint masks - #01-L
1/24 Toyota Celica Turbo 4WD Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
OLEG Body Retro Formula 1/24 Lotus 63, Lexan .010" (0.254 mm) - #0124
Retro Formula 1/24 Lotus 63 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
RALPH THORNE Clear Body 1/24 GTP Renegade, Lexan .007" (0.175 mm) - #RENEGADE007
RALPH THORNE Clear Body 1/24 GTP Renegade, Lexan .007" (0.175 mm) - #RENEGADE007
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body GM 1/24 Ford Cargo, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #80-P
NeAn Clear body GM 1/24 Ford Cargo
- Made from: Polyvinyl chloride (PVC);
- For: GM (Truck);
- Thickness: .015" (0.4 mm);
- Width: 3.464" (88 mm);
- Height: 3.543" + .236" (90 + 6 mm);
- Wheelbase: 4.724" (120 mm);
- Wheels dia., till: till 1.417" (36 mm);
Clear body, with paint mask
-
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .007" (0.175 mm) - #VIKING007
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .007" (0.175 mm) - #VIKING007
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .010" (0.254 mm) - #VIKING010
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .010" (0.254 mm) - #VIKING010
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .010" (0.254 mm)
- Clear body
-
CAMEN AIR/CONTROL KIT , THICKNESS .004" (0,1 mm), FULL SKIRT - #CMN5900.044
Air Control Kit including .014" Diaplane, .004" Skirted Side Dams and .004" Rear Spoiler
-
NeAn Clear body GM 1/24 Scania, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #81-P
NeAn Clear body GM 1/24 Scania
- Made from: Polyvinyl chloride (PVC);
- For: GM (Truck);
- Thickness: .015" (0.4 mm);
- Width: 3.464" (88 mm);
- Height: 3.543" (90 mm);
- Wheelbase: 4.724" - 6.889" (120 -175 mm);
- Wheels dia., till: till 1.417" (36 mm);
Clear body, with paint mask
-
Koford Yellow spoiler sticker, 1 pc. - #M719
Koford Yellow spoiler sticker, 1 pc. - #M719
Decorate your body with branded stickers :)
-
NeAn INTERIOR FOR "TEAPOT" 1/24 BODIES, PVC, thickness 0.2 mm - #100-P
INTERIOR FOR "TEAPOT" 1/24 BODIES
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness, mm: 0,2
-
KOLHOZA Clear Production 1/32 Peugeot body, Lexan thickness .005" (0.125 mm) - #0102T
Clear Production 1/32 Peugeot body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
KOLHOZA 1/24 Custom painted car interior, white, thin .005" (0,125 mm) - #0126-white
KOLHOZA 1/24 Custom painted car interior, white, thin .005" (0,125 mm) - #0126-white
-
KOLHOZA 1/24 Custom painted car interior, red, thin .005" (0,125 mm) - #0126-red
KOLHOZA 1/24 Custom painted car interior, red, thin .005" (0,125 mm) - #0126-red
-
KOLHOZA 1/24 Custom painted car interior, green, thin .005" (0,125 mm) - #0126-green
KOLHOZA 1/24 Custom painted car interior, green, thin .005" (0,125 mm) - #0126-green
-
OLEG Clear Body Formula 1/24 McLaren MCL 35 2020, Lexan .007" (0.175 mm) - #0141
Clear Body Formula 1/24 McLaren MCL 35 2020
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
OLEG Clear Body Formula 1/24 Alpine A522 2022, Lexan .005" (0.125 mm) - #0146T
Clear Body Formula 1/24 Alpine A522 2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
OLEG Clear Body Formula 1/24 Alpine A522 2022, Lexan .007" (0.175 mm) - #0146
Clear Body Formula 1/24 Alpine A522 2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
CHAMPION 1/32 Stock car words, black, 1 pc. - #CHA373A
CHAMPION 1/32 Stock car words, black, 1 pc. - #CHA373A
-
CHAMPION 1/32 Stock car words, white, 1 pc. - #CHA373B
CHAMPION 1/32 Stock car words, white, 1 pc. - #CHA373B
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM PLAYBOY BUNNY, Lexan .007" (0.175 mm) - #0121A
Custom Painted Body Production 1/24 Audi RS5 DTM PLAYBOY BUNNY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM XXX RED BULL, Lexan .007" (0.175 mm) - #0121B
Custom Painted Body Production 1/24 Audi RS5 DTM XXX RED BULL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM HOFFMAN GROUP, Lexan .007" (0.175 mm) - #0121C
Custom Painted Body Production 1/24 Audi RS5 DTM HOFFMAN GROUP
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM ARAL, Lexan .007" (0.175 mm) - #0121D
Custom Painted Body Production 1/24 Audi RS5 DTM ARAL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
KOLHOZA Clear body Eurosport 1/32 Audi R15 2008, lexan, thickness .007" (0.175 mm) - KZA#0124
KOLHOZA Clear body Eurosport 1/32 Audi R15 2008
This body is presented for legalisation by ISRA rules for the next vote!
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body.
-
BPA Clear body ES-G12 Toyota GT ONE GB, lexan, thickness .007" (0.175 mm) - #K 033
Clear body ES-G12 Toyota GT ONE GB
- Made from: Polycarbonate (Lexan)
- For: ES-G12
- Thickness: .007" (0.175 mm)
- Clear body w/paint mask.
-
BPA Clear Body ES G12-24 outlaw Bentley WR, Lexan .005" (0.125 mm), with paint mask - #K 043-005
Clear Body ES G12-24 outlaw Bentley WR
- Made from: Polycarbonate (Lexan)
- For: ES G12-24 outlaw
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body ES G12-24 outlaw Bentley WR, Lexan .007" (0.175 mm), with paint mask - #K 043-007
Clear Body ES G12-24 outlaw Bentley WR
- Made from: Polycarbonate (Lexan)
- For: ES G12-24 outlaw
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear Body ES G12-24 Bentley EXP GB, Lexan .005" (0.125 mm), with paint mask - #K 044-005
Clear Body ES G12-24 Bentley EXP GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body ES G12-24 Bentley EXP GB, Lexan .007" (0.175 mm), with paint mask - #K 044-007
Clear Body ES G12-24 Bentley EXP GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear Body ES G12-24 Lola GB, Lexan .005" (0.125 mm), with paint mask - #K 049-005
Clear Body ES G12-24 Lola GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .005" (0.125 mm)
- Clear body
-
KOLHOZA EUROSPORT 1/32 AUDI R15 TDI BODY, LEXAN, thickness .005" (0.125 mm) - #656-LT
EUROSPORT 1/32 Audi R15 TDI Body
ISRA LEGAL 2015-2020
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM, Lexan .007" (0.175 mm) - #0121F
Custom Painted Body Production 1/24 Audi RS5 DTM
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM, Lexan .007" (0.175 mm) - #0121G
Custom Painted Body Production 1/24 Audi RS5 DTM
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
KOLHOZA Clear Production 1/32 Peugeot body, Lexan thickness .007" (0.175 mm) - #0102
Clear Production 1/32 Peugeot body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
Special order!
-
KOLHOZA Clear Production 1/32 Audi w/fin body, Lexan thickness .005" (0.125 mm) - #0120T
Clear Production 1/32 Audi w/fin body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
Special order!
-
KOLHOZA Clear Production 1/32 Audi w/fin body, Lexan thickness .007" (0.175 mm) - #0120
Clear Production 1/32 Audi w/fin body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
Special order!
-
JK Stock car numbers, orange - #S6
JK Stock car numbers, orange - #S6
Old catalog #JK20031O
-
JK Stock car numbers, red - #S7
JK Stock car numbers, red - #S7
Old catalog #JK20031R
-
NeAn INTERIOR FOR "TEAPOT" 1/24 BODIES, W/SAFETY CAGE AND FIRE EXTINGUISHER, Lexan, thickness 0.125 mm - #101-L
INTERIOR FOR "TEAPOT" 1/24 BODIES, W/SAFETY CAGE AND FIRE EXTINGUISHER
-
NeAn INTERIOR FOR "TEAPOT" 1/24 BODIES, W/SAFETY CAGE AND FIRE EXTINGUISHER, PVC, thickness 0.2 mm - #101-P
INTERIOR FOR "TEAPOT" 1/24 BODIES, W/SAFETY CAGE AND FIRE EXTINGUISHER
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness, mm: 0,2
- w/with safety cage and fire extinguisher
-
CAMEN Air control kit .004" full skirt - #5900.045
CAMEN Air control kit .004" full skirt - #5900.045
Air Control Kit including .014" Diaplane, .004" Skirted Side Dams and .005" Rear Spoiler
-
CAMEN Air control kit .004" half skirt - #5905.044
CAMEN Air control kit .004" half skirt - #5905.044
Air Control Kit including .014" Diaplane, .004" "Half Skirt" Side Dams and .004" Rear Spoiler
-
CAMEN Air control kit .004" half kit - #5905.045
CAMEN Air control kit .004" half kit
Air Control Kit including .014" Diaplane, .004" "Half Skirt" Side Dams and .005" Rear Spoiler
-
CAMEN Air control kit .004" skirtless - #5910.044
CAMEN Air control kit .004" skirtless - #5910.044
Air Control Kit including .014" Diaplane, .004" Non Skirted Side Dams and .004" Rear Spoiler
-
CAMEN Air control kit .004" skirtless - #5910.045
CAMEN Air control kit .004" skirtless - #5910.045
Air Control Kit including .014" Diaplane, .004" Non Skirted Side Dams and .005" Rear Spoiler
-
CAMEN Air control kit .004" rear spoiler - #5980.004
CAMEN Air control kit .004" rear spoiler - #5980.004
6 pieces of .004 thick rear spoilers
-
CAMEN Air control kit .005" full skirt - #CMN5900.055
CAMEN Air control kit .005" full skirt - #CMN5900.055
Air Control Kit including .014" Diaplane, .005" Skirted Side Dams and .005" Rear Spoiler
-
RED FOX Clear Body Eurosport 1/32 Audi EURO (ISRA 2023 - 2026), Lexan .005" (0.125 mm) - #RFES1/3223
RED FOX Clear Body Eurosport 1/32 Audi EURO LEGAL FOR ISRA 2023
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
KOLHOZA FORMULA 1/32 MERCEDES W06 HYBRID BODY, LEXAN, thickness .005" (0.125 mm) - #0112LT
Formula 1/32 Mercedes W06 Hybrid Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
-
CAMEN Air control kit .005" half skirt - #5905.055
CAMEN Air control kit .004" half skirt - #5905.055
Air Control Kit including .014" Diaplane, .005" "Half Skirt" Side Dams and .005" Rear Spoiler
-
DUBICK Lexan (polycarbonate) for body reinforcement, w/sticky layer 3M, thickness .005" (0.125 mm), size 1.968" x 6.692" (50x170 mm) - #2070
Lexan for body reinforcement
Parameters
- Thickness: .005" (0.125 mm)
- Size: 1.968" x 6.692" (50x170 mm)
- w/sticky layer 3M
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM, Lexan .007" (0.175 mm) - #0121H
Custom Painted Body Production 1/24 Audi RS5 DTM
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
RALPH THORNE Clear Body 4.5" Dirt Oval Dirt Late Modified, Lexan .007" (0.175 mm) - #DLM007
RALPH THORNE Clear Body 4.5" Dirt Oval Dirt Late Modified, Lexan .007" (0.175 mm) - #DLM007
- Made from: Polycarbonate (Lexan)
- For: 4.5" Dirt Oval
- Thickness: .007" (0.175 mm)
- Clear body
-
OLEG Body Retro 1/24 March 707, Lexan .010" (0.254 mm) - #0125
Retro 1/24 March 707 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM RED BULL, Lexan .007" (0.175 mm) - #0121I
Custom Painted Body Production 1/24 Audi RS5 DTM RED BULL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Retro Formula 1/24 Lotus 63 ESSEX MICHELIN, Lexan .010" (0.254 mm) - #0124P1
Custom Painted Body Retro Formula 1/24 Lotus 63 ESSEX MICHELIN
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro Formula 1/24 Lotus 63 LOTUS HONDA, Lexan .010" (0.254 mm) - #0124P2
Custom Painted Body Retro Formula 1/24 Lotus 63 LOTUS HONDA
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Production 1/24 Aston Martin Vantage PINK DTM 2019, Lexan .007" (0.175 mm) - #0131A
Custom Painted Body Production 1/24 Aston Martin Vantage PINK DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Aston Martin Vantage PETRONAS DTM 2019, Lexan .007" (0.175 mm) - #0131B
Custom Painted Body Production 1/24 Aston Martin Vantage PETRONAS DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Aston Martin Vantage JAMES BOND DTM 2019, Lexan .007" (0.175 mm) - #0131C
Custom Painted Body Production 1/24 Aston Martin Vantage JAMES BOND DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Retro 1/24 Buick Riviera 1969 PLAYBOY, Lexan .015" (0.381 mm) - #0132P1
Custom Painted Body Retro 1/24 Buick Riviera 1969 PLAYBOY
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro Formula 1/24 Brabham BT26 1969, Lexan .010" (0.254 mm) - #0133P1
Custom Painted Body Retro Formula 1/24 Brabham BT26 1969
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro Formula 1/24 Brabham BT26 1969 MARTINI, Lexan .010" (0.254 mm) - #0133P2
Custom Painted Body Retro Formula 1/24 Brabham BT26 1969 MARTINI
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro Formula 1/24 AAR Indy Eagle 1968 PENNZOIL, Lexan .010" (0.254 mm) - #0134P1
Custom Painted Body Retro Formula 1/24 AAR Indy Eagle 1968 PENNZOIL
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 Can-Am Shelby T 10 King Cobra 1967 SHELBY GOODYEAR, Lexan .010" (0.254 mm) - #0135P1
Custom Painted Body Retro 1/24 Can-Am Shelby T 10 King Cobra 1967 SHELBY GOODYEAR
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 Healey SR Coventry Climax 1968 PENNZOIL, Lexan .010" (0.254 mm) - #136P1
Custom Painted Body Retro 1/24 Healey SR Coventry Climax 1968 PENNZOIL
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 McLaren M12 Can-Am 1969 TEXACO GOODYEAR, Lexan .010" (0.254 mm) - #0138P1
Custom Painted Body Retro 1/24 McLaren M12 Can-Am 1969 TEXACO GOODYEAR
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 Buick Gran Sport 1967 BAD BOY, Lexan .015" (0.381 mm) - #0139P1
Custom Painted Body Retro 1/24 Buick Gran Sport 1967 BAD BOY
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 Dodge Dart 1968 FLAMES, Lexan .010" (0.254 mm) - #0140P1
Custom Painted Body Retro 1/24 Dodge Dart 1968 FLAMES
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
DELTA PLASTIC Clear body 1/24 Pagani Utopia, lexan, thickness .005" (0.125 mm), w/paint masks - #DP25413-5
DELTA PLASTIC Clear body 1/24 Pagani Utopia
- Made from: Polycarbonate (Lexan)
- For: 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body 1/24 Pagani Utopia, lexan, thickness .007" (0.175 mm), w/paint masks - #DP25413-7
DELTA PLASTIC Clear body 1/24 Pagani Utopia
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body 1/32 Porsche 963, lexan, thickness .005" (0.125 mm), w/paint masks - #DP25417-5
DELTA PLASTIC Clear body 1/32 Porsche 963
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body 1/32 Porsche 963, lexan, thickness .007" (0.175 mm), w/paint masks - #DP25417-7
DELTA PLASTIC Clear body 1/32 Porsche 963
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body 1/32 Dallara Exp, lexan, thickness .005" (0.125 mm), w/paint masks - #DP25418-5
DELTA PLASTIC Clear body 1/32 Dallara Exp
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body 1/32 Dallara Exp, lexan, thickness .007" (0.175 mm), w/paint masks - #DP25418-7
DELTA PLASTIC Clear body 1/32 Dallara Exp
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask!
-
BOLID-NeAn Clear body 1/32 Mazda Rental, Lexan .005" (0.125 mm) - #67-L-5
Clear body 1/32 Mazda Rental
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .005" (0.125 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/32 Mazda Rental, Lexan .007" (0,175 mm) - #67-L-7
Clear body 1/32 Mazda Rental
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .007" (0.175 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/32 McLaren F1 Rental, Lexan .005" (0.125 mm) - #68-L-5
Clear body 1/32 McLaren F1 Rental
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .005" (0.125 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/32 McLaren F1 Rental, Lexan .007" (0.175 mm) - #68-L-7
Clear body 1/32 McLaren F1 Rental
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .007" (0.175 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/24 McLaren F1 Rental, Lexan .005" (0.125 mm) - #74-L-5
Clear body 1/24 McLaren F1 Rental
- Made from: Polycarbonate (Lexan)
- For: 1/24
- Thickness: .005" (0.125 mm)
- Clear body with paint masks
-
OLEG Body Production 1/24 Subaru BRZ, Lexan .005" (0.125 mm), with paint mask - #0122T
Production 1/24 Subaru BRZ body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- with paint mask
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team RED BULL RB16B 2021 Turkish GP 2021, Lexan .007" (0.175 mm) - #0141A
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team RED BULL RB16B 2021 Turkish GP 2021 - #0141A
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body (painted without stickers)
-
KOLHOZA FORMULA 1/32 MERCEDES W06 HYBRID BODY, LEXAN, thickness .007" (0.175 mm) - #0112L
Formula 1/32 Mercedes W06 Hybrid Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
-
KOLHOZA Formula 1/32 body (ISRA legal 2020-2022) Mercedes W07 Hybrid, thin .005" (0.125 mm) - #0114LT
Formula 1/32 Mercedes W07 Hybrid Body
ISRA legal 2020-2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness, mm: 0,125
-
KOLHOZA Formula 1/32 body (ISRA legal 2020-2022) Mercedes W07 Hybrid, thin .007" (0.175 mm) - #0114L
Formula 1/32 Mercedes W07 Hybrid Body
ISRA legal 2020-2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness, mm: 0,175
-
KOLHOZA Clear Body Formula 1/32 Ferrari SF 90 thin .005" (0.125 mm) - #0123LT
Clear Body Formula 1/32 Ferrari SF 90
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 TOYOTA CELICA TURBO 4WD, PVC, thickness .015" (0.4 mm), w/paint masks - #01-P
1/24 Toyota Celica Turbo 4WD Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MERCEDES BENZ CLK DTM BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #02-L
1/24 Mercedes Benz CLK DTM Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MERCEDES BENZ CLK DTM BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #02-P
1/24 Mercedes Benz CLK DTM Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MERCEDES BENZ 300 SL 1954 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #03-L
1/24 Mercedes Benz 300 SL 1954 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MERCEDES BENZ 300 SL 1954 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #03-P
1/24 Mercedes Benz 300 SL 1954 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 VOLKSWAGEN 1300 HOT ROD BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #04-L
1/24 Volkswagen 1300 Hot Rod Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 VOLKSWAGEN 1300 HOT ROD BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #04-P
1/24 Volkswagen 1300 Hot Rod Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 RENAULT ALPINA 1800 S 1971 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #05-L
1/24 Renault Alpina 1800 S 1971 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 RENAULT ALPINA 1800 S 1971 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #05-P
1/24 Renault Alpina 1800 S 1971 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 CHEVROLET CORVETTE BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #06-L
1/24 Chevrolet Corvette Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 CHEVROLET CORVETTE BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #06-P
1/24 Chevrolet Corvette Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 LANCIA STRATOS 1974 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #07-L
1/24 Lancia Stratos 1974 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 LANCIA STRATOS 1974 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #07-P
1/24 Lancia Stratos 1974 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 BUICK ROADMASTER 1948 HOT ROD BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #08-L
1/24 Buick Roadmaster 1948 Hot Rod Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 BUICK ROADMASTER 1948 HOT ROD BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #08-P
1/24 Buick Roadmaster 1948 Hot Rod Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 DODGE VIPER RT 10 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #09-L
1/24 Dodge Viper RT 10 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 DODGE VIPER RT 10 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #09-P
1/24 Dodge Viper RT 10 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 PORSCHE 911 GT1 1996 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #10-L
1/24 Porsche 911 GT1 1996 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 PORSCHE 911 GT1 1996 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #10-P
1/24 Porsche 911 GT1 1996 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MERCEDES BENZ CLK GTR BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #11-L
1/24 Mercedes Benz CLK GTR Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MERCEDES BENZ CLK GTR BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #11-P
1/24 Mercedes Benz CLK GTR Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 FERRARI 330 P4 1968 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #12-L
1/24 Ferrari 330 P4 1968 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 FERRARI 330 P4 1968 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #12-P
1/24 Ferrari 330 P4 1968 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 FERRARI 550 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #13-L
1/24 Ferrari 550 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019, Lexan .007" (0.175 mm) - #0141B
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019 - #0141B
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body (painted without stickers)
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
REDFOX FORMULA 1/24 BODY, Lexan, thin .007" (0.175mm) - RFSC29C
Formula 1/24 Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175mm)
-
NeAn Clear 1/24 FERRARI 550 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #13-P
1/24 Ferrari 550 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 NOBLE M12 GTO BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #14-L
1/24 Noble M12 GTO Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 NOBLE M12 GTO BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #14-P
1/24 Noble M12 GTO Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 ASTON MARTIN DBR 9 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #15-L
1/24 Aston Martin DBR 9 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 ASTON MARTIN DBR 9 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #15-P
1/24 Aston Martin DBR 9 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
KOLHOZA EUROSPORT 1/32 AUDI R15 TDI BODY, LEXAN, thickness .007" (0.175 mm) - #656-L
EUROSPORT 1/32 Audi R15 TDI Body
ISRA LEGAL 2015-2020
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team ALPHA ROMEO С39 2020, Lexan .007" (0.175 mm) - #0141P1
Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team ALPHA ROMEO С39 2020 - #0141P1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team ALPHA TAURI AT01 2020, Lexan .007" (0.175 mm) - #0141P2
Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team ALPHA TAURI AT01 2020 - #0141P2
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MCLAREN MCL35 2020, Lexan .007" (0.175 mm) - #0141P3
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MCLAREN MCL35 2020 - #0141P3
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan VALVOLINE (painted without stickers), Lexan .007" (0.175 mm) - #0142A
Custom Painted Body Production 1/24 Lamborghini Huracan VALVOLINE
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Body Retro 1/24 McLaren M1B, Lexan .010" (0.254 mm) - #0126
Retro 1/24 McLaren M1B body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Body Retro 1/24 Lola T310, Lexan .010" (0.254 mm) - #0127
Retro 1/24 Lola T310 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Body Retro 1/24 Bizzarrini P538, Lexan .010" (0.254 mm) - #0128
Retro 1/24 Bizzarrini P538 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Body Retro Formula 1/24 Surtees TS7, Lexan .010" (0.254 mm) - #0129
Retro Formula 1/24 Surtees TS7 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Body Retro 1/24 Citroen CV2, Lexan .007" (0.175 mm) - #0130
Retro 1/24 Citroen CV2 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .007" (0.175 mm)
-
BPA Clear Body Eurosport 1/24 BMW LMR, Lexan .007" (0.175 mm), with paint mask - #K 021-007
BPA Clear Body Eurosport 1/24 BMW LMR
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear Body Eurosport 1/24 BMW LM, Lexan .005" (0.125 mm), with paint mask - #BPA-K035-005
BPA Clear Body Eurosport 1/24 BMW LM
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
REDFOX Clear body F1 JRL Hallo Ferrari Formula 1/24, Lexan, thin .007" (0.175mm) - #RFSC105C
REDFOX Clear body F1 JRL Hallo Ferrari Formula 1/24
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan CASTROL (painted without stickers), Lexan .007" (0.175 mm) - #0142B
Custom Painted Body Production 1/24 Lamborghini Huracan CASTROL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan PENNZOIL (painted without stickers), Lexan .007" (0.175 mm) - #0142C
Custom Painted Body Production 1/24 Lamborghini Huracan PENNZOIL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan PENNZOIL (painted without stickers), Lexan .007" (0.175 mm) - #0142D
Custom Painted Body Production 1/24 Lamborghini Huracan PENNZOIL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
GOFER RACING Gasser #2 decals, 1 pc. - #GR11078
GOFER RACING Gasser #2 decals, 1 pc. - #GR11078
-
BPA Clear Body ES G12-24 Lola GB, Lexan .007" (0.175 mm), with paint mask - #K 049-007
Clear Body ES G12-24 Lola GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear body G12-24 outlaw Porsche, lexan, thickness .005" (0.125 mm) - #K 055-005
BPA Clear body G12-24 outlaw Porsche
- Made from: Polycarbonate (Lexan)
- For: G12-24 outlaw
- Thickness: .005" (0.125 mm)
- Clear body w/paint mask.
-
BPA Clear body G12-24 outlaw Porsche, lexan, thickness .007" (0.175 mm) - #K 055-007
BPA Clear body G12-24 outlaw Porsche
- Made from: Polycarbonate (Lexan)
- For: G12-24 outlaw
- Thickness: .007" (0.175 mm)
- Clear body w/paint mask.
-
BPA Clear body G12 LOLA LM EVO, lexan, thickness .005" (0.125 mm) - #K 091-005
Clear body G12 LOLA LM EVO
- Made from: Polycarbonate (Lexan)
- For: G12
- Thickness: .005" (0.125 mm)
- Clear body.
-
BPA Clear body G12 LOLA LM EVO, lexan, thickness .007" (0.175 mm) - #K 091-007
Clear body G12 LOLA LM EVO
- Made from: Polycarbonate (Lexan)
- For: G12
- Thickness: .007" (0.175 mm)
- Clear body.
-
DELTA PLASTIC Clear Body Open 12 Lola, Lexan .005" (0.125 mm) - #DP25408-5
Clear Body Open 12 Lola
New bodies from Italy!
- Made from: Polycarbonate (Lexan)
- For: Open 12
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body Eurosport 1/24 BMW LM, Lexan .007" (0.175 mm), with paint mask - #BPA-K035-007
BPA Clear Body Eurosport 1/24 BMW LM
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
OLEG Body Eurosport 1/24 Audi R15 LMP DTI, thin .005” (0.125 mm) - #OLG0118T
Eurosport 1/24 Audi R15 LMP DTI body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0,125 mm)
-
OLEG Body Eurosport 1/24 Audi R15 LMP DTI, thin .007” (0.175 mm) - #OLG0118
Eurosport 1/24 Audi R15 LMP DTI body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0,175 mm)
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, W/STICKY LAYER 3M, thickness .005" (0.125 mm), size 1.968" x 9.449" (50 x 240 mm) - #2070
Lexan for body reinforcement
Parameters
- Thickness: .005" (0.125 mm)
- Size: 1.968" x 9.449" (50 x 240 mm)
- w/3M sticky layer
-
GOFER RACING Hometown sponsors #6 decals, 1 pc. - #GR11076
GOFER RACING Hometown sponsors #6 decals, 1 pc. - #GR11076
-
GOFER RACING Service trucks decals, 1 pc. - #11014
GOFER RACING Service trucks decals, 1 pc. - #11014
Service Truck decals from Gofer Racing! These decals are for towing trucks, wreckers, rollups, snow-plows and pickup trucks. They also can be used on service station dioramas. Decals include fire extinguisher, dielsel, service and towing markings. Small town car repair companies such as Fifth Street Automotive, Ace Repair & Towing LLC, and Brown's Auto Glass Mobile Service let you decorate your model to be ready to service any type of vehicle. Gofer Racing waterslide decals are designed and silk-screen printed in the USA for 1/24 and 1/25 scale plastic model car kits. Features: Size: 7 3/4" x 4 3/4", Waterslide decal
-
OLEG Body Production 1/24 Subaru BRZ, Lexan .007" (0.175 mm), with paint mask - #0122
Production 1/24 Subaru BRZ body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- with paint mask
-
OLEG Body Eurosport 1/24U Acura ARX-05 DPi IMSA, thin .005” (0.125 mm), with paint mask - #0123T
Eurosport 1/24U Acura ARX-05 DPi IMSA body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24U
- Thickness: .005" (0,125 mm)
- with paint mask
-
OLEG Clear Body Retro 1/24 Buick Riviera 1969 4,5", Lexan .015" (0.381 mm) - #0132
Clear Body Retro 1/24 Buick Riviera 1969 4,5"
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 Brabham BT26 1969, Lexan .010" (0.254 mm) - #0133
Clear Body Retro Formula 1/24 Brabham BT26 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 AAR Indy Eagle 1968, Lexan .010" (0.254 mm) - #0134
Clear Body Retro Formula 1/24 AAR Indy Eagle 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Can-Am Shelby T 10 King Cobra 1967, Lexan .010" (0.254 mm) - #0135
Clear Body Retro 1/24 Can-Am Shelby T 10 King Cobra 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Healey SR Coventry Climax 1968, Lexan .010" (0.254 mm) - #0136
Clear Body Retro 1/24 Healey SR Coventry Climax 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Elfin T400, Lexan .010" (0.254 mm) - #0137
Clear Body Retro 1/24 Elfin T400
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 McLaren M12 Can-Am 1969, Lexan .010" (0.254 mm) - #0138
Clear Body Retro 1/24 McLaren M12 Can-Am 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Buick Gran Sport 1967, Lexan .015" (0.381 mm) - #0139
Clear Body Retro 1/24 Buick Gran Sport 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Dodge Dart 1968, Lexan .010" (0.254 mm) - #0140
Clear Body Retro 1/24 Dodge Dart 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 Tyrrell 001 1970, Lexan .010" (0.254 mm) - #0143
Clear Body Retro Formula 1/24 Tyrrell 001 1970
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 Matra MS120 1970, Lexan .010" (0.254 mm) - #0144
Clear Body Retro Formula 1/24 Matra MS120 1970
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Chevrolet Monza 1975, Lexan .010" (0.254 mm) - #0147
Clear Body Retro 1/24 Chevrolet Monza 1975
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Body Retro Formula 1/24 Williams FW05, Lexan .010" (0.254 mm)
Retro Formula 1/24 Williams FW05 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
NeAn Clear "TEAPOT" 1/24 Chevrolet Corvette Coupe 1960 body, Lexan, thickness .015" (0.375 mm), w/paint masks - #30-L-15
Clear "TEAPOT" 1/24 Chevrolet Corvette Coupe 1960 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.375 mm)
- Clear body, with paint mask
-
NeAn Clear body Retro Formula 1/24 BRM H16 1967, Lexan .010" (0.254 mm) - #110-L
Clear body Retro Formula 1/24 BRM H16 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019, Lexan .005" (0.125 mm), with paint mask - #0131T
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan RED BULL (painted without stickers), Lexan .007" (0.175 mm) - #0142E
Custom Painted Body Production 1/24 Lamborghini Huracan RED BULL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019, Lexan .007" (0.175 mm), with paint mask - #0131
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
OLEG Production 1/24 Lamborghini Huracan body for 4" chassis, Lexan .005" (0.125 mm), with paint mask - #0142T
Body Production 1/24 Lamborghini Huracan
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
OLEG Production 1/24 Lamborghini Huracan body for 4" chassis, Lexan .007" (0.175 mm), with paint mask - #0142
Body Production 1/24 Lamborghini Huracan
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
OLEG Body Eurosport 1/24U Acura ARX-05 DPi IMSA, thin .007” (0.175 mm), with paint mask - #0123
Eurosport 1/24U Acura ARX-05 DPi IMSA body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24U
- Thickness: .007" (0,175 mm)
- with paint mask
-
KOLHOZA Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body, Lexan thin .005” (0.125 mm), with paint mask - #0118T
Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .005" (0,125 mm);
- Clear body, with paint mask.
-
OLEG Production 1/24 Ferrari 488 GT3 EVO body for 4" chassis, Lexan .005" (0.125 mm), with paint mask - #0145T
Body Production 1/24 Ferrari 488 GT3 EVO
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan BWT (painted without stickers), Lexan .007" (0.175 mm) - #0142F
Custom Painted Body Production 1/24 Lamborghini Huracan BWT
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan PETRONAS (painted without stickers), Lexan .007" (0.175 mm) - #0142G
Custom Painted Body Production 1/24 Lamborghini Huracan PETRONAS
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan DHL (painted without stickers), Lexan .007" (0.175 mm) - #0142H
Custom Painted Body Production 1/24 Lamborghini Huracan DHL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan MONSTER ENERGY (painted without stickers), Lexan .007" (0.175 mm) - #0142I
Custom Painted Body Production 1/24 Lamborghini Huracan MONSTER ENERGY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan MARTINI (painted without stickers), Lexan .007" (0.175 mm) - #0142J
Custom Painted Body Production 1/24 Lamborghini Huracan MARTINI
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan REPSOL (painted without stickers), Lexan .007" (0.175 mm) - #0142L
Custom Painted Body Production 1/24 Lamborghini Huracan REPSOL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan SANTANDER (painted without stickers), Lexan .007" (0.175 mm) - #0142K
Custom Painted Body Production 1/24 Lamborghini Huracan SANTANDER
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Retro Formula 1/24 Tyrrell 001 1970 (painted without stickers), Lexan .010" (0.254 mm) - #0143P1
Custom Painted Body Retro Formula 1/24 Tyrrell 001 1970 (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .010" (0.254 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Retro Formula 1/24 Matra MS120 1970 (painted without stickers), Lexan .010" (0.254 mm) - #0144P1
Custom Painted Body Retro Formula 1/24 Matra MS120 1970 (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .010" (0.254 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO SANTANDER (painted without stickers), Lexan .007" (0.175 mm) - #0145A
Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO SANTANDER (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO FINA (painted without stickers), Lexan .007" (0.175 mm) - #0145B
Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO FINA (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO SHELL (painted without stickers), Lexan .007" (0.175 mm) - #0145C
Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO SHELL (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO ALITALIA (painted without stickers), Lexan .007" (0.175 mm) - #0145D
Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO ALITALIA (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Black, w/window and front stickers, PVC .02" (0.4 mm), with paint mask - #0155Black
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Black
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .02" (0.4 mm)
- Custom Painted Body
-
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Blue, w/window and front stickers, PVC .02" (0.4 mm), with paint mask - #0155Blue
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Blue
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .02" (0.4 mm)
- Custom Painted Body
-
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Green, w/window and front stickers, PVC .02" (0.4 mm), with paint mask - #0155Green
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Green
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .02" (0.4 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Alpine A522 2022, Lexan .007" (0.175 mm) - #0146A
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Alpine A522 2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Force India VJM02 2009, Lexan .007" (0.175 mm) - #0146B
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Force India VJM02 2009
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Honda RA106 2006, Lexan .007" (0.175 mm) - #0146C
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Honda RA106 2006
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Renault R 30 2010, Lexan .007" (0.175 mm) - #0146D
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Renault R 30 2010
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Red Bull RB16B 2021 Turkish GP 2021, Lexan .007" (0.175 mm) - #0146E
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Red Bull RB16B 2021 Turkish GP 2021
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Mercedes, Lexan .007" (0.175 mm) - #0146F
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Mercedes
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Ferrari, Lexan .007" (0.175 mm) - #0146J
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Ferrari
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Jaguar, Lexan .007" (0.175 mm) - #0146I
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Jaguar
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team McLaren, Lexan .007" (0.175 mm) - #0146H
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team McLaren
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom painted body Retro Formula 1/24 Brabham BT34 1975 BARDAHL, Lexan .01" (0.25 mm) - #0148P1
Custom painted body Retro Formula 1/24 Brabham BT34 1975 BARDAHL
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .01" (0.25 mm)
- Custom painted body
-
KOLHOZA F 1/32 SUPER AGURI SA 07 2007 CUSTOM PAINTED BODY - KZA#2004
F 1/32 Super Aguri SA 07 2007 CUSTOM PAINTED BODY
- ISRA legal 2017-2019 "Mercedes W07 Hybrid"
- Made from LEXAN thickness .005"
- Really light body without any stickers, only painting
-
OLEG Production 1/24 Ferrari 488 GT3 EVO body for 4" chassis, Lexan .007" (0.175 mm), with paint mask - #0145
Body Production 1/24 Ferrari 488 GT3 EVO
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers, Lexan .01" (0.25 mm), with paint mask - #0155T
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers, Lexan .015" (0.375 mm), with paint mask - #0155
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .015" (0.375 mm)
- Clear body, with paint mask
-
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers, PVC .02" (0.4 mm), with paint mask - #0155P
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .02" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 RENAULT MEGANE TROPHY BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #16-L
1/24 Renault Megane Trophy Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 RENAULT MEGANE TROPHY BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #16-P
1/24 Renault Megane Trophy Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 LOTUS ELISE BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #17-L
1/24 Lotus Elise Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 LOTUS ELISE BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #17-P
1/24 Lotus Elise Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 ALFA ROMEO 8C BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #18-L
1/24 Alfa Romeo 8c Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 ALFA ROMEO 8C BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #18-P
1/24 Alfa Romeo 8c Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 SPANO GTA BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #19-L
1/24 SPANO GTA Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask.
-
NeAn Clear 1/24 SPANO GTA BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #19-P
1/24 SPANO GTA Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
REDFOX Clear Scale Body INDY CAR Formula 1/24, Lexan, thin .007" (0.175mm) - #RFSC35C
REDFOX Clear Scale Body INDY CAR Formula 1/24, Lexan
- Made from: Polycarbonate (Lexan)
- For: Formula/INDY 1/24
- Thickness: .007" (0.175mm)
- Clear body
-
NeAn Clear 1/24 MARUSSIA B2 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #20-L
1/24 Marussia B2 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MARUSSIA B2 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #20-P
1/24 Marussia B2 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MCLAREN P1 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #21-L
1/24 McLaren P1 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 MCLAREN P1 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #21-P
1/24 McLaren P1 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 GAZ-21 "VOLGA" BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #22-L
1/24 GAZ-21 Volga Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 GAZ-21 "VOLGA" BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #22-P
1/24 GAZ-21 Volga Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Ford Model B 1932 (GAZ M1 PICKUP) body, Lexan, thickness .01" (0.25 mm), w/paint masks - #23-L
Clear 1/24 Ford Model B 1932 (GAZ M1 PICKUP) body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
OLEG Clear body Eurosport 1/24 Audi R15 TDI, Lexan .005" (0.125 mm) - #0156LT
Clear body Eurosport 1/24 Audi R15 TDI
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
- Lengthened body version - overall length 160 mm (6,299")
-
OLEG Clear body Eurosport 1/24 Audi R15 TDI, Lexan .007" (0.175 mm) - #0156L
Clear body Eurosport 1/24 Audi R15 TDI
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
- Lengthened body version - overall length 160 mm (6,299")
-
NeAn Clear 1/24 Ford Model B 1932 (GAZ M1 PICKUP) body, PVC, thickness .015" (0.4 mm), w/paint masks - #23-P
1/24 Ford Model B 1932 (GAZ M1 PICKUP) body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 GAZ-M20 "Pobeda" BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #24-L
1/24 GAZ-M20 "Pobeda" Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 GAZ-M20 "Pobeda" BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #24-P
1/24 GAZ-M20 "Pobeda" Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAN Clear 1/24 Spyker C8 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #25-L
1/24 Spyker C8 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Spyker C8 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #25-P
1/24 Spyker C8 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Škoda Dakos A5 1978 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #26-L
1/24 Škoda Dakos A5 1978 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Škoda Dakos A5 1978 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #26-P
Clear 1/24 Škoda Dakos A5 1978 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Dodge Dragster BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #27-L
Clear 1/24 Dodge Dragster Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Dodge Dragster BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #27-P
1/24 Dodge Dragster Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 GM Firebird concept 15 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #28-L
Clear 1/24 GM Firebird concept 15 BODY
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 GM Firebird concept 15 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #28-P
Clear 1/24 GM Firebird concept 15 BODY
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 KTM X-BOW GT-4 body, Lexan, thickness .01" (0.25 mm), w/paint masks - #29-L
Clear 1/24 KTM X-BOW GT-4 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body, Lexan, thickness .005" (0.125 mm), w/paint masks - #31-L-5
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body, Lexan, thickness .007" (0.175 mm), w/paint masks - #31-L-7
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
KOLHOZA Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body, Lexan thin .007” (0.175 mm), with paint mask - #0118
Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body, with paint mask.
-
OLEG Clear body Production 1/24 Toyota Camry NASCAR for 4" chassis, Lexan .005" (0.125 mm), with paint mask - #0154T
OLEG Clear body Production 1/24 Toyota Camry NASCAR
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
OLEG Clear body Production 1/24 Toyota Camry NASCAR for 4" chassis, Lexan .007" (0.175 mm), with paint mask - #0154
OLEG Clear body Production 1/24 Toyota Camry NASCAR
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body, Lexan, thickness .01" (0.25 mm), w/paint masks - #31-L-10
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body, Lexan, thickness .015" (0.38 mm), w/paint masks - #31-L-15
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.38 mm)
- Clear body, with paint mask
-
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body, PVC, thickness .015" (0.38 mm), w/paint masks - #31-P
NeAn Clear 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.38 mm)
- Clear body, with paint mask
-
NeAn Clear body 1/24 Shelby Daytona Cobra Coupe 1965, Lexan .010" (0.254 mm), w/paint masks - #32-L-10
NeAn Clear body 1/24 Shelby Daytona Cobra Coupe 1965
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear body 1/24 Shelby Daytona Cobra Coupe 1965, PVC .015" (0.4 mm), w/paint masks - #32-P
NeAn Clear body 1/24 Shelby Daytona Cobra Coupe 1965
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear body 1/24 Morgan Aero GT-3 2010, Lexan .010" (0.254 mm), w/paint masks - #33-L-10
NeAn Clear body 1/24 Morgan Aero GT-3 2010
- Made from: Polycarbonate (Lexan)
- For: 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear body 1/24 Morgan Aero GT-3 2010, PVC, thickness .015" (0.4 mm), w/paint masks - #33-P
NeAn Clear body 1/24 Morgan Aero GT-3 2010
- Made from: Polyvinyl chloride (PVC)
- For: 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear body 1/24 Lamborghini Huracan GT3 EVO2 2025, Lexan .010" (0.254 mm), w/paint masks - #34-LD
NeAn Clear body 1/24 Lamborghini Huracan GT3 EVO2 2025
- Made from: Polycarbonate (Lexan)
- For: 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear body 1/24 Lamborghini Huracan GT3 EVO2 2025, Lexan .015" (0.375 mm), w/paint masks - #34-LD
NeAn Clear body 1/24 Lamborghini Huracan GT3 EVO2 2025
- Made from: Polycarbonate (Lexan)
- For: 1/24
- Thickness: .015" (0.375 mm)
- Clear body, with paint mask
-
NeAn Clear body 1/24 Lamborghini Huracan GT3 EVO2 2025, PVC, thickness .015" (0.4 mm), w/paint masks - #34-P
NeAn Clear body 1/24 Lamborghini Huracan GT3 EVO2 2025
- Made from: Polyvinyl chloride (PVC)
- For: 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
KOLHOZA Clear Body Formula 1/32 Ferrari SF 90 thin .007" (0.175 mm) - #0123L
Clear Body Formula 1/32 Ferrari SF 90
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
KOLHOZA Clear Body Formula 1/32 McLaren MCL36, thin .005" (0.125 mm) - #0125LT
Clear Body Formula 1/32 McLaren MCL36
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
KOLHOZA Clear Body Formula 1/32 McLaren MCL36, thin .007" (0.175 mm) - #0125L
Clear Body Formula 1/32 McLaren MCL36
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
KOLHOZA Clear Body Formula 1/32 RB Honda - RBPT 2024 thin .007" (0.175 mm) - #0126L
KOLHOZA Clear Body Formula 1/32 RB Honda - RBPT 2024
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
KOLHOZA Clear Body Formula 1/32 RB Honda - RBPT 2024 thin .005" (0.125 mm) - #0126LT
KOLHOZA Clear Body Formula 1/32 RB Honda - RBPT 2024
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
KOLHOZA Clear Body Formula 1/32 Haas F1 thin .005" (0.125 mm) - #0127LT
Clear Body Formula 1/32 Haas F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
- This body is designed for an extended wheelbase (for new chassis).
-
KOLHOZA Clear Body Formula 1/32 Haas F1 thin .007" (0.175 mm) - #0127L
Clear Body Formula 1/32 Haas F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
- This body is designed for an extended wheelbase (for new chassis).
-
KOLHOZA EUROSPORT 1/32 AUDI BODY, LEXAN, thickness .005" (0.125 mm) - #653-LT
EUROSPORT 1/32 Audi R15 TDI Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Special order!
-
NeAn Clear body Retro 1/24 Ferrari 330 P4 1967, Lexan .010" (0.254 mm) - #111-L
Clear body Retro 1/24 Ferrari 330 P4 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
KOLHOZA PRODUCTION 1/24 SUBARU WRC BODY, LEXAN, thickness .005" (0.125 mm) - #0101T
PRODUCTION 1/24 SUBARU BODY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
KOLHOZA FORMULA 1/32 RED BULL BODY, LEXAN, thickness .005" (0.125 mm)
Formula 1/32 RED BULL Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
Special order!
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, w/3M sticky layer, thickness .007" (0.175 mm), size 1.968" x 7.087" (50 x 180 mm) - #2071
Lexan for body reinforcement
Parameters
- Thickness: .007" (0.175 mm)
- Size: 1.968" x 7.087" (50 x 180 mm)
- w/3M sticky layer
-
NeAn FORMULA 1/24 MCLAREN BODY, Lexan, thin .01" (0.25mm) - #40-L
Formula 1/24 McLaren Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
KOLHOZA PRODUCTION 1/24 SUBARU WRC BODY, LEXAN, thickness .007" (0.175 mm) - #0101
PRODUCTION 1/24 SUBARU BODY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
KOLHOZA EUROSPORT 1/24 AUDI R15 TDI BODY, LEXAN, thickness .005" (0.125 mm) - #0113LT
EUROSPORT 1/24 Audi R15 TDI Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
-
NeAn FORMULA 1/24 MCLAREN BODY, PVC, thin. .015" (0.4mm) - #40-P
Formula 1/24 McLaren Body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4mm)
-
NeAn FORMULA 1/24 FERRARI 312 BODY, Lexan, thin .01" (0.25mm) - #41-L
Formula 1/24 Ferrari 312 Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 FERRARI 312 BODY, PVC, thin. .015" (0.4 mm) - #41-P
Formula 1/24 Ferrari 312 Body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 FITTIPALDI 1979 BODY, Lexan, thin .01" (0.25mm) - #42-L
Formula 1/24 Body Fittipaldi 1979
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 FITTIPALDI 1979 BODY, PVC, thin .015" (0.4 mm) - #42-P
Formula 1/24 Body Fittipaldi 1979
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 Brabham BT 55 1986 body, Lexan, thin .01" (0.25mm) - #43-L
Formula 1/24 Body Brabham BT 55 1986
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 Brabham BT 55 1986 body, PVC, thin .015" (0.4 mm) - #43-P
Formula 1/24 Body Brabham BT 55 1986
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 Renault RS01 1976 body, Lexan, thin .01" (0.25mm) - #44-L
Formula 1/24 Renault RS01 1976
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
KOLHOZA Body Production 1/24 Ferrari 458 WEC, Lexan .005" (0.125 mm), with paint mask - #0116T
Body Production 1/24 Ferrari 458 WEC
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
KOLHOZA Body Production 1/24 Ferrari 458 WEC, Lexan .007" (0.175 mm), with paint mask - #0116
Body Production 1/24 Ferrari 458 WEC
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
KOLHOZA Body Production 1/24 Chevrolet Corvette, Lexan .005" (0.125 mm), with paint mask and stickers - #0117T
Body Production 1/24 Chevrolet Corvette
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
KOLHOZA Body Production 1/24 Chevrolet Corvette, Lexan, thickness .007" (0.175 mm), with paint mask and stickers - #0117
Body Production 1/24 Chevrolet Corvette
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
RALPH THORNE Clear body Production 1/24 NSX, Lexan .007" (0.175 mm), with paint mask - #NSX007
- RALPH THORNE Clear body Production 1/24 NSX
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
RALPH THORNE Clear Body Production 1/24 BMW Production, Lexan .007" (0.175 mm) - #RTR-1291
RALPH THORNE Clear Body Production 1/24 BMW Production, Lexan .007" (0.175 mm) - #RTR-1291
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
RED FOX Clear body Production 1/24 Fusion ISRA, lexan, thickness .007" (0.175 mm), w/paint masks - #RFPRODF7
RED FOX Clear body Production 1/24 Fusion ISRA
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask!
-
KOLHOZA Clear Production 1/32 McLaren F1 GT body, Lexan thickness .005" (0.125 mm) - #651-LT
Clear Production1/32 McLaren F1 GT body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .005" (0.125 mm);
- Clear body, with paint mask.
-
KOLHOZA Clear Production1/32 McLaren F1 GT body, Lexan thickness .007" (0.175 mm) - #651-L
Clear Production1/32 McLaren F1 GT body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0.175 mm);
- Clear body, with paint mask.
-
NeAn FORMULA 1/24 Renault RS01 1976 body, PVC, thin .015" (0.4 mm) - #44-P
Formula 1/24 Body Renault RS01 1976
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 Ligier JS11 1979 body, Lexan, thin .01" (0.25mm) - #45-L
Formula 1/24 Ligier JS11 1979
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 Ligier JS11 1979 body, PVC, thin .015" (0.4 mm) - #45-P
Formula 1/24 Body Ligier JS11 1979
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 Lotus 88 1980 body, Lexan, thin .01" (0.25mm) - #46-L
Formula 1/24 Lotus 88 1980
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 Lotus 88 1980 body, PVC, thin .015" (0.4 mm) - #46-P
Formula 1/24 Body Lotus 88 1980
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
TAYLO RACING ISRA NUMBER STICKERS, height 8 mm, sheet 80 х 130 mm - #007
TayloRacing ISRA NUMBER STICKERS, height 8 mm, sheet 80 х 130 mm - #007
-
TAYLO RACING SPONSOR STICKERS #2, w/cut outline, sheet 167 х 110 mm- #002
TAYLO RACING SPONSOR STICKERS #2, w/cut outline, sheet 167 х 110 mm- #002
-
TAYLO RACING SPONSOR STICKERS #3, w/cut outline, sheet 167 х 110 mm- #003
TAYLO RACING SPONSOR STICKERS #3, w/cut outline, sheet 167 х 110 mm- #003
-
TAYLO RACING SPONSOR STICKERS #4, w/cut outline, sheet 167 х 110 mm- #004
TAYLO RACING SPONSOR STICKERS #4, w/cut outline, sheet 167 х 110 mm- #004
-
NeAn FORMULA 1/24 AGS-Cosworth 1986 body, Lexan, thin .01" (0.25mm) - #47-L
Formula 1/24 AGS-Cosworth 1986
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 AGS-Cosworth 1986 body, PVC, thin .015" (0.4 mm) - #47-P
Formula 1/24 Body AGS-Cosworth 1986
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
KOLHOZA FORMULA 1/32 RED BULL BODY, LEXAN, thickness .007" (0.175 mm)
Formula 1/32 RED BULL Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
-
NeAn Clear Formula 1/24 Renault RE 30 1982 body, Lexan, thin .01" (0.25mm) - #48-L
Clear Formula 1/24 Renault RE 30 1982 body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
- Clear body
-
NeAn Clear Formula 1/24 Renault RE 30 1982 body, PVC, thin .015" (0.4 mm) - #48-P
Clear Formula 1/24 Renault RE 30 1982 body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
- Clear body
-
KOLHOZA EUROSPORT 1/24 AUDI R15 TDI BODY, LEXAN, thickness .007" (0.175 mm) - #0113L
EUROSPORT 1/24 Audi R15 TDI Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
-
TAYLO RACING PAINT MASK FOR EUROSPORT 1/24 AUDI R15 TDI
The inscriptions and logos are made in a mirror image, which makes it possible to use them as painting masks.
-
KOLHOZA EUROSPORT 1/24 NISSAN GT-R LM NISMO BODY, Lexan .005" (0.125 mm) - #01144T
EUROSPORT 1/24 Nissan GT-R LM Nismo Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
-
NeAn Clear Formula 1/24 Parnelli-Offenhauser 1974 (Indycar) body, Lexan, thin .01" (0.25mm) - #49-L
Clear Formula 1/24 Parnelli-Offenhauser 1974 (Indycar) body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
- Clear body
-
NeAn Clear Formula 1/24 Parnelli-Offenhauser 1974 (Indycar) body, PVC, thin .015" (0.4 mm) - #49-P
Clear Formula 1/24 Parnelli-Offenhauser 1974 (Indycar) body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
- Clear body
-
ZHB LANE STICKERS, 10 sheets
ZHB LANE STICKERS, 10 sheets
Lane stickers for model, from 1 to 8 lane
-
NeAn Clear Production 1/32 Porsche 911 GT1 body, Lexan thickness .005" (0.125 mm), w/paint masks — #60-LT
Clear Production 1/32 Porsche 911 GT1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
KOFORD SHORT BIG HEAD BODY PINS (STRAIGHT), 48 psc. in tube - #M545
Short length big head pro body pins. No trimming required! Won't stick past the end of the body mount tube and hang up lead wire or stick marshalls. Ligher weight then long pins. Custom made just for us, the best on the market. 48 pins per package.
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, w/3M sticky layer, thickness .010" (0.25 mm), size 1.968" x 7.087" (50 x 180 mm) - #2072
Lexan for body reinforcement
Parameters
- Thickness: .010" (0.25 mm)
- Size: 1.968" x 7.087" (50 x 180 mm)
- w/3M sticky layer
-
WRIGHTWAY Body gussets (reinforcement for rear wheels), Lexan .015" (0.381 mm), w/3M sticky layer, 6 pairs - #WWBG
WRIGHTWAY Body gussets (reinforcement for rear wheels), Lexan .015" (0.381 mm), w/3M sticky layer, 6 pairs - #WWBG
The length of the body gusset is 1.076" (27.35 mm).
An excellent solution for those who like to save time when preparing bodies!
-
NeAn Clear Formula 1/24 Chaparral 2K Cosworth (Indycar) body, Lexan, thin .01" (0.25mm) - #50-L
Clear Formula 1/24 Chaparral 2K Cosworth (Indycar) body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
- Clear body
-
NeAn Clear Formula 1/24 Chaparral 2K Cosworth (Indycar) body, PVC, thin .015" (0.4 mm) - #50-P
Clear Formula 1/24 Chaparral 2K Cosworth (Indycar) body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
- Clear body
-
KOLHOZA EUROSPORT 1/24 NISSAN GT-R LM NISMO BODY, Lexan .007" (0.175 mm) - #01144
EUROSPORT 1/24 Nissan GT-R LM Nismo Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
-
TAYLO RACING PAINT MASK FOR EUROSPORT 1/24 NISSAN GT-R LM NISMO
The inscriptions and logos are made in a mirror image, which makes it possible to use them as painting masks.
-
LARS Clear body Production 1/24 Tesla Model S, PVC .008" (0.2 mm) - #1
Clear body Production 1/24 Tesla Model S
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .008" (0.2 mm)
- Clear body, w/paint masks
-
NeAn PRODUCTION 1/24 JAGUAR S-TYPE BODY, LEXAN, thickness .007" (0.175 mm), w/paint masks - #70PL
PRODUCTION 1/24 JAGUAR S-TYPE BODY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- w/paint masks
-
NeAn PRODUCTION 1/24 JAGUAR S-TYPE BODY, PVC, thickness .008" (0.2 mm), w/paint masks - #70P
PRODUCTION 1/24 JAGUAR S-TYPE BODY
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .008" (0.2 mm)
- w/paint masks
-
NeAn PRODUCTION 1/24 ALFA ROMEO BODY, LEXAN, thickness .007" (0.175 mm), w/paint masks - #71PL
PRODUCTION 1/24 ALFA ROMEO BODY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- w/paint masks
-
NeAn PRODUCTION 1/24 ALFA ROMEO BODY, PVC, thickness .008" (0.2 mm), w/paint masks - #71P
PRODUCTION 1/24 ALFA ROMEO BODY
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .008" (0.2 mm)
- w/paint masks
-
NeAn Clear body Production 1/24 Ford Coupe 1933 Hot Rod, Lexan .005" (0.125 mm) - #72PLT
Clear body Production 1/24 Ford Coupe 1933 Hot Rod
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Ford Coupe 1933 Hot Rod, Lexan .007" (0.175 mm) - #72PL
Clear body Production 1/24 Ford Coupe 1933 Hot Rod
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear Production 1/32 Porsche 911 GT1 body, Lexan thickness .007" (0.175 mm), w/paint masks — #60-L
Clear Production 1/32 Porsche 911 GT1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Porsche 911 GT1 body, PVC thickness .008" (0.2 mm), w/paint masks — #60-P
Clear Production 1/32 Porsche 911 GT1 body
- Made from: Polyvinyl chloride (PVC);
- For: Production 1/32;
- Thickness: .008" (0.2 mm);
- Clear body, with paint mask.
-
NeAn Clear Production 1/32 Ferrari 330 P4 body, Lexan thickness .005" (0.125 mm), w/paint masks - #61-LT
Clear Production 1/32 Ferrari 330 P4 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .005" (0.125 mm);
- Clear body, with paint mask.
-
NeAn Clear Production 1/32 Ferrari 330 P4 body, Lexan thickness .007" (0.175 mm), w/paint masks - #61-L
Clear Production 1/32 Ferrari 330 P4 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0.175 mm);
- Clear body, with paint mask.
-
NeAn Clear Production 1/32 Audi R18 body, Lexan thickness .005" (0.125 mm), w/paint masks - #62-LT
Clear Production 1/32 Audi R18 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Audi R18 body, PVC thickness .008" (0.2 mm), w/paint masks - #62P
Clear Production 1/32 Audi R18 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Audi R18 body, Lexan thickness .007" (0.175 mm), w/paint masks - #62-L
Clear Production 1/32 Audi R18 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren P1 body, Lexan thickness .005" (0.125 mm), w/paint masks — #63-LT
Clear Production 1/32 McLaren P1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren P1 body, Lexan thickness .007" (0.175 mm), w/paint masks — #63-L
Clear Production 1/32 McLaren P1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
GENERAL ELECTRIC POLYCARBONATE (LEXAN) SHEET, THICK. .005" (0.125 mm), DIM.: 1000 X 1200 mm, running metre
POLYCARBONATE (LEXAN) SHEET
It is possible to cut the lexan into the dimensions you need
Parameters:
- Thick: .005" (0.125 mm)
- Dimension: 1000 x 1200 mm
- running metre
-
GENERAL ELECTRIC POLYCARBONATE (LEXAN) SHEET, THICK. .007" (0.175 mm), DIM.: 1000 X 1200 mm, running metre
POLYCARBONATE (LEXAN) SHEET
It is possible to cut the lexan into the dimensions you need
Parameters:
- Thick.: .007" (0.175 mm)
- Dimension: 1000 x 1200 mm
- running metre
-
NeAn Clear Production 1/32 McLaren P1 body, PVC thickness .008" (0.2 mm), w/paint masks — #63-P
Clear Production 1/32 McLaren P1 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
NeAn Clear body Production 1/24 Ford Coupe 1933 Hot Rod, Lexan .01" (0.25 mm) - #72PLD
Clear body Production 1/24 Ford Coupe 1933 Hot Rod
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .01" (0.25 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 KTM X-BOW GT-4, Lexan .005" (0.125 mm) - #73PLT
Clear body Production 1/24 KTM X-BOW GT-4
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 KTM X-BOW GT-4, Lexan .007" (0.175 mm) - #73PL
Clear body Production 1/24 KTM X-BOW GT-4
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 KTM X-BOW GT-4, Lexan .01" (0.25 mm) - #73PLD
Clear body Production 1/24 KTM X-BOW GT-4
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .01" (0.25 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Ferrari 296 GT3, Lexan .005" (0.125 mm) - #75PLT
Clear body Production 1/24 Ferrari 296 GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Ferrari 296 GT3, Lexan .007" (0.175 mm) - #75PL
Clear body Production 1/24 Ferrari 296 GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Ferrari 296 GT3, Lexan .01" (0.25 mm) - #75PLD
Clear body Production 1/24 Ferrari 296 GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .01" (0.25 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Ferrari 296 GT3, PVC .008" (0.2 mm) - #75P
Clear body Production 1/24 Ferrari 296 GT3
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .008" (0.2 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Chevrolet Corvette, Lexan .005" (0.125 mm) - #151PLT
Clear body Production 1/24 Chevrolet Corvette
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Chevrolet Corvette, Lexan .007" (0.175 mm) - #151PL
Clear body Production 1/24 Chevrolet Corvette
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Porsche 911 GT1, Lexan .005" (0.125 mm) - #152PLT
Clear body Production 1/24 Porsche 911 GT1
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Porsche 911 GT1, Lexan .007" (0.175 mm) - #152PL
Clear body Production 1/24 Porsche 911 GT1
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Saleen, Lexan .005" (0.125 mm) - #153PLT
Clear body Production 1/24 Saleen
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Saleen, Lexan .007" (0.175 mm) - #153PL
Clear body Production 1/24 Saleen
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
DELTA PLASTIC Clear body Production 1/24 Audi R8 DTM, lexan, thickness .005" (0.125 mm), w/paint masks - #DP25412-5
DELTA PLASTIC Clear body Production 1/24 Audi R8 DTM
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body Production 1/24 Audi R8 DTM, lexan, thickness .007" (0.175 mm), w/paint masks - #DP25412-7
DELTA PLASTIC Clear body Production 1/24 Audi R8 DTM
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body Production 1/24 Lamborghini Huracan, lexan, thickness .005" (0.125 mm), w/paint masks - #DP25414-5
DELTA PLASTIC Clear body Production 1/24 Lamborghini Huracan
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask!
-
BOLID-NeAn Clear body 1/24 McLaren F1 Rental, Lexan .007" (0.175 mm) - #74-L-7
Clear body 1/24 McLaren F1 Rental
- Made from: Polycarbonate (Lexan)
- For: 1/24
- Thickness: .007" (0.175 mm)
- Clear body with paint masks
-
DELTA PLASTIC Clear body Production 1/24 Lamborghini Huracan, lexan, thickness .007" (0.175 mm), w/paint masks - #DP25414-7
DELTA PLASTIC Clear body Production 1/24 Lamborghini Huracan
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body Production 1/24 2024 GT3, lexan, thickness .005" (0.125 mm), w/paint masks - #DP25415-5
DELTA PLASTIC Clear body Production 1/24 2024 GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body Production 1/24 2024 GT3, lexan, thickness .007" (0.175 mm), w/paint masks - #DP25415-7
DELTA PLASTIC Clear body Production 1/24 2024 GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body Production 1/24 Porsche 011 GT3, lexan, thickness .005" (0.125 mm), w/paint masks - #DP25416-5
DELTA PLASTIC Clear body Production 1/24 Porsche 011 GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask!
-
DELTA PLASTIC Clear body Production 1/24 Porsche 011 GT3, lexan, thickness .007" (0.175 mm), w/paint masks - #DP25416-7
DELTA PLASTIC Clear body Production 1/24 Porsche 011 GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask!
-
BPA Clear body Production 1/24 Volvo S60 R (ISRA 2012), lexan, thickness .007" (0.175 mm) - #K 061
BPA Clear body Production 1/24 Volvo S60 R LEGAL FOR ISRA 2012
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
BPA Clear body Production 1/24 HONDA CUP, lexan, thickness .007" (0.175 mm) - #K 078
Clear body Production 1/24 HONDA CUP
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren 650S GT3 body, Lexan thickness .005" (0.125 mm), w/paint masks - #64-LT
Clear Production 1/32 McLaren 650S GT3 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren 650S GT3 body, Lexan thickness .007" (0.175 mm), w/paint masks — #64-L
Clear Production 1/32 McLaren 650S GT3 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren 650S GT3 body, PVC thickness .008" (0.2 mm), w/paint masks — #64-P
Clear Production 1/32 McLaren 650S GT3 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
BPA Clear body Production 1/24 Toyota coupe (ISRA 2013), lexan, thickness .007" (0.175 mm) - #K 087
Clear body Production 1/24 Toyota coupe LEGAL FOR ISRA 2013
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, Lexan thickness .005" (0.125 mm), w/paint masks - #65-L-5
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, Lexan thickness .007" (0.175 mm), w/paint masks - #65-L-7
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, Lexan thickness .01" (0.25 mm), w/paint masks - #65-L-10
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, Lexan thickness .015" (0.38 mm), w/paint masks - #65-L-15
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .015" (0.38 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, PVC thickness .008" (0.2 mm), w/paint masks - #65-P
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Intrepid RM 1 body, Lexan thickness .005" (0.125 mm), w/paint masks - #66-L-5
NeAn Clear Production 1/32 Intrepid RM 1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Intrepid RM 1 body, Lexan thickness .007" (0.175 mm), w/paint masks - #66-L-7
NeAn Clear Production 1/32 Intrepid RM 1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Intrepid RM 1 body, PVC thickness .008" (0.2 mm), w/paint masks - #66-P
NeAn Clear Production 1/32 Intrepid RM 1 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
NeAn Clear body Eurosport 1/32U Audi R8, Lexan .005" (0.125 mm) - #160PLT
NeAn Clear body Eurosport 1/32U Audi R8
This body is made according to ES-32 rules for chassis Production 1/32
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32U
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body GM 1/24 Sisu, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #82-P
NeAn Clear body GM 1/24 Sisu
- Made from: Polyvinyl chloride (PVC);
- For: GM (Truck);
- Thickness: .015" (0.4 mm);
- Width: 3.464" (88 mm);
- Height: 3.622" (92 mm);
- Wheelbase: 4.724" - 7.283" (120 -185 mm);
- Wheels dia., till: till 1.417" (36 mm);
Clear body, with paint mask
-
NeAn Clear body GM 1/24 Ford Aeromax, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #83-P
NeAn Clear body GM 1/24 Ford Aeromax
- Made from: Polyvinyl chloride (PVC);
- For: GM (Truck);
- Thickness: .015" (0.4 mm);
- Width: 3.464" (88 mm);
- Height: 3.543" (90 mm);
- Wheelbase: 6.299" (160 mm);
- Wheels dia., till: till 1.417" (36 mm);
Clear body, with paint mask
-
BPA Clear Production 1/32 Porsche 911 GT2 body, Lexan thickness .005" (0.125 mm), w/paint masks - #K 007
Clear Production 1/32 Porsche 911 GT2 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
BPA Clear Production 1/32 Toyota GT Four body, Lexan thickness .005" (0.125 mm), w/paint masks - #K 034
Clear Production 1/32 Toyota GT Four body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
BPA Clear Production 1/32 DTM GB body, Lexan thickness .005" (0.125 mm), w/paint masks - #K 089
Clear Production 1/32 DTM GB body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear body GM 1/24 Jaguar, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #84-P
NeAn Clear body GM 1/24 Jaguar
- Made from: Polyvinyl chloride (PVC);
- For: GM (Truck);
- Thickness: .015" (0.4 mm);
- Width: 3.267" (83 mm);
- Height: 2.165" (55 mm);
- Wheelbase: 4.842" (123 mm);
- Wheels dia., till: till 1.259" (32 mm);
Clear body, with paint mask
-
JK Clear Body 1/24 4" Chevy Nastruck, Lexan .007" (0.175 mm), with paint mask - #B63A
JK Clear Body 1/24 4" Chevy Nastruck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
Old catalog #JK71141A -
JK Clear Body 1/24 4" Super Truck-Tatra, Lexan .01" (0.25 mm), with paint mask - #B140B
JK Clear Body 1/24 4" Super Truck-Tatra
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .01" (0.25 mm)
- Clear body with paint mask
Old catalog #JK7402B
-
NeAn Clear body Formula 1/32 Williams F1, Lexan .005" (0.125 mm) - #90-LT
Clear body Formula 1/32 Williams F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Formula 1/32 Williams F1, Lexan .007" (0.175 mm) - #90-L
Clear body Formula 1/32 Williams F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Formula 1/32 McLaren F1, Lexan .005" (0.125 mm) - #91-LT
Clear body Formula 1/32 McLaren F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Formula 1/32 McLaren F1, Lexan .007" (0.175 mm) - #91-L
Clear body Formula 1/32 McLaren F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Formula 1/32 Racing Bulls 2025, Lexan .005" (0.125 mm) - #92-LT
Clear body Formula 1/32 Racing Bulls 2025
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
- SPECIAL MADE BODY FOR BRUSHLESS MOTOR AND LONG CHASSIS
-
NeAn Clear body Formula 1/32 Racing Bulls 2025, Lexan .007" (0.175 mm) - #92-L
Clear body Formula 1/32 Racing Bulls 2025
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
- SPECIAL MADE BODY FOR BRUSHLESS MOTOR AND LONG CHASSIS
-
NeAn Clear body Formula 1/32 Brabham BT 48 1979, Lexan .005" (0.125 mm) - #93-LT
Clear body Formula 1/32 Brabham BT 48 1979
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Formula 1/32 Brabham BT 48 1979, Lexan .007" (0.175 mm) - #93-L
Clear body Formula 1/32 Brabham BT 48 1979
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Formula 1/32 Ferrari 642 1991, Lexan .005" (0.125 mm) - #94-LT
Clear body Formula 1/32 Ferrari 642 1991
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Formula 1/32 Ferrari 642 1991, Lexan .007" (0.175 mm) - #94-L
Clear body Formula 1/32 Ferrari 642 1991
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn INTERIOR W/ENGINE COMPARTMENT FOR "TEAPOT" 1/24 BODY SPANO GTA, Lexan, thickness 0.125 mm - #102-L
INTERIOR W/ENGINE COMPARTMENT FOR "TEAPOT" 1/24 BODY SPANO GTA
-
NeAn INTERIOR W/ENGINE COMPARTMENT FOR "TEAPOT" 1/24 BODY SPANO GTA, PVC, thickness 0.2 mm - #102-P
INTERIOR W/ENGINE COMPARTMENT FOR "TEAPOT" 1/24 BODY SPANO GTA
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24 body Spano GTA
- Thickness, mm: 0,2
w/engine compartment
-
ZHB PAINT MASK FOR BODY
ZHB PAINT MASK FOR BODY
-
NeAn INTERIOR FOR PRODUCTION 1/24 BODIES, Lexan, thickness 0.125 mm - #103-L
INTERIOR FOR PRODUCTION 1/24 BODIES
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,125
-
NeAn INTERIOR FOR PRODUCTION 1/24 BODIES, PVC, thickness 0.2 mm - #103-P
INTERIOR FOR PRODUCTION 1/24 BODIES
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness, mm: 0,2
-
NeAn INTERIOR FOR PRODUCTION 1/32 BODIES, Lexan, thickness 0.125 mm - #105-L
INTERIOR FOR PRODUCTION 1/32 BODIES
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness, mm: 0,125
-
TAYLO RACING SPONSOR STICKERS #5, w/cut outline, sheet 167 х 110 mm- #005
TAYLO RACING SPONSOR STICKERS #5, w/cut outline, sheet 167 х 110 mm- #005
-
KOLHOZA EUROSPORT 1/24 AUDI BODY, LEXAN, thickness .005" (0.125 mm) - #654-LT
EUROSPORT 1/24 Audi Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Special order!
-
KOLHOZA EUROSPORT 1/32 AUDI BODY, LEXAN, thickness .007" (0.175 mm) - #653-L
EUROSPORT 1/32 Audi R15 TDI Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Special order!
-
GENERAL ELECTRIC POLYCARBONATE (LEXAN) SHEET, THICK. .01" (0.25 mm), DIM.: 1000 X 1200 mm, running metre
POLYCARBONATE (LEXAN) SHEET
It is possible to cut the lexan into the dimensions you need
Parameters:
- Thick.: .01" (0.25 mm)
- Dimension: 1000 x 1200 mm
- running metre
-
RALPH THORNE Clear Body 1/24 4.5" Truck, Lexan .007" (0.175 mm), with paint mask - #TRUCK007
RALPH THORNE Clear Body 1/24 4.5" Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
-
NeAn INTERIOR FOR PRODUCTION 1/32 BODIES, PVC, thickness 0.2 mm - #105-P
INTERIOR FOR PRODUCTION 1/32 BODIES
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness, mm: 0,2
-
NeAn INTERIOR FOR PRODUCTION 1/24 BODIES, W/REAR SEAT, Lexan, thickness 0.125 mm - #106-L
INTERIOR FOR PRODUCTION 1/24 BODIES, W/REAR SEAT
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,125
- w/rear seat
-
NeAn INTERIOR FOR PRODUCTION 1/24 BODIES, W/REAR SEAT, PVC, thickness 0.2 mm - #106-P
INTERIOR FOR PRODUCTION 1/24 BODIES, W/REAR SEAT
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness, mm: 0,2
- w/rear seat
-
NeAn INTERIOR FOR PRODUCTION 1/32 BODIES, PVC, thickness 0.2 mm - #107-P
INTERIOR FOR PRODUCTION 1/32 BODIES
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness, mm: 0,2
-
ATTAN INTERIOR FOR PRODUCTION 1/24 BODY, Lexan - #1402-005
INTERIOR FOR PRODUCTION 1/24 BODY VOLVO S60 TTA ISRA 2014
- Made from: Polycarbonate (Lexan)
- For: Production 1/24 body Volvo S60 TTA (ISRA 2014)
-
DELTA PLASTIC Clear interior 1/24, lexan
DELTA PLASTIC Clear interior 1/24, lexan
-
KOLHOZA 1/24 Car interrior clear, thickness .005" (0.125 mm) - #0121
KOLHOZA 1/24 Car interrior
- clear,
- thickness .005" (0.125 mm).
-
NeAn Clear body Retro 1/24 McLaren M1B 1967, Lexan .010" (0.254 mm) - #112-L
Clear body Retro 1/24 McLaren M1B 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Lola T70 MK II Spyder 1966, Lexan .010" (0.254 mm) - #113-L
Clear body Retro 1/24 Lola T70 MK II Spyder 1966
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Lola T70 MK III B GT 1969, Lexan .010" (0.254 mm) - #114-L
Clear body Retro 1/24 Lola T70 MK III B GT 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ferrari 350 Canam 1967, Lexan .010" (0.254 mm) - #115-L
Clear body Retro 1/24 Ferrari 350 Canam 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro Formula 1/24 McLaren M9A 1969, Lexan .010" (0.254 mm) - #116-L
Clear body Retro Formula 1/24 McLaren M9A 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Jaguar Mark II 1959, Lexan .015" (0.38 mm) - #117-L
Clear body Retro 1/24 Jaguar Mark II 1959
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Buick Special Riviera Coupe 1955, Lexan .025" (0.635 mm) - #118-L
Clear body Retro 1/24 Buick Special Riviera Coupe 1955
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .025" (0.635 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Honda RA-302 1968, Lexan .010" (0.254 mm) - #119-L
Clear body Retro 1/24 Honda RA-302 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Alfa Romeo 33/2 Tipo Daytona 1968, Lexan .010" (0.254 mm) - #120-L
Clear body Retro 1/24 Alfa Romeo 33/2 Tipo Daytona 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Chrysler 300-B 1955, Lexan .015" (0.38 mm) - #121-L
Clear body Retro 1/24 Chrysler 300-B 1955
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Cadillac Series 61 Race Car 1950, Lexan .015" (0.38 mm) - #122-L
Clear body Retro 1/24 Cadillac Series 61 Race Car 1950
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ford P68 (F 3L) 1968, Lexan .010" (0.254 mm) - #123-L
Clear body Retro 1/24 Ford P68 (F 3L) 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ford GT MK IV 1968, Lexan .010" (0.254 mm) - #124-L
Clear body Retro 1/24 Ford GT MK IV 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Chaparral 2D "Sebring" Coupe 1966, Lexan .010" (0.254 mm) - #125-L
Clear body Retro 1/24 Chaparral 2D "Sebring" Coupe 1966
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Chaparral 2С 1965, Lexan .010" (0.254 mm) - #126-L
Clear body Retro 1/24 Chaparral 2С 1965
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 McLaren M6 1968, Lexan .010" (0.254 mm) - #127-L
NeAn Clear body Retro 1/24 McLaren M6 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Plymouth Fury 1958, Lexan .010" (0.254 mm) - #128-L-10
NeAn Clear body Retro 1/24 Plymouth Fury 1958
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Plymouth Fury 1958, Lexan .015" (0.375 mm) - #128-L-15
NeAn Clear body Retro 1/24 Plymouth Fury 1958
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.375 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Shelby Daytona Cobra Coupe 1965, Lexan .010" (0.254 mm) - #129-L-10
NeAn Clear body Retro 1/24 Shelby Daytona Cobra Coupe 1965
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Matra MS 670 1972, Lexan .010" (0.254 mm) - #141-L
Clear body Retro 1/24 Matra MS 670 1972
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ferrari 312 PB 1972, Lexan .010" (0.254 mm) - #142-L
Clear body Retro 1/24 Ferrari 312 PB 1972
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Mirage M6 1974, Lexan .010" (0.254 mm) - #143-L
Clear body Retro 1/24 Mirage M6 1974
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ford C100 1981, Lexan .010" (0.254 mm) - #144-L
Clear body Retro 1/24 Ford C100 1981
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Porsche 962 1985, Lexan .010" (0.254 mm) - #145-L
Clear body Retro 1/24 Porsche 962 1985
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Porsche 936/935 Kremer CK 5 1983, Lexan .010" (0.254 mm) - #146-L
Clear body Retro 1/24 Porsche 936/935 Kremer CK 5 1983
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 TOJ TG 390 1981, Lexan .010" (0.254 mm) - #147-L
Clear body Retro 1/24 TOJ TG 390 1981
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Jaguar XGR 14 1991, Lexan .010" (0.254 mm) - #148-L
Clear body Retro 1/24 Jaguar XGR 14 1991
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
REDFOX PRODUCTION 1/24 ALFA ROMEO BODY (ISRA 2017), LEXAN, thickness .007" (0.175 mm) - #RFISRAROMEO7
PRODUCTION 1/24 ALFA ROMEO BODY LEGAL FOR ISRA 2017
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
-
-
KOLHOZA EUROSPORT 1/24 AUDI BODY, LEXAN, thickness .007" (0.175 mm) - #654-L
EUROSPORT 1/24 Audi Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Special order!
-
NeAn Clear body Eurosport 1/24 Cadillac, Lexan .005" (0.125 mm) - #154-LT
Clear body Eurosport 1/24 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Eurosport 1/32 Cadillac, Lexan .005" (0.125 mm) - #155PLT
Clear body Eurosport 1/32 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Cadillac, Lexan .007" (0.175 mm) - #155PL
Clear body Eurosport 1/32 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Zitec 04 S, Lexan .005" (0.125 mm) - #157PLT
Clear body Eurosport 1/32 Zitec 04 S
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
RED FOX Production 1/24 Audi RS5 DTM body (ISRA 2019), lexan, thickness .005" (0.125 mm), w/paint masks - #RFAUDIPROD19-05
PRODUCTION 1/24 Audi RS5 DTM BODY LEGAL FOR ISRA 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- w/paint masks
-
NeAn Clear body Eurosport 1/24 Cadillac, Lexan .007" (0.175 mm) - #154-L
Clear body Eurosport 1/24 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Peugeot 905 1991, Lexan .010" (0.254 mm) - #149-L
Clear body Retro 1/24 Peugeot 905 1991
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Interpid RM1 1993, Lexan .010" (0.254 mm) - #150-L
Clear body Retro 1/24 Interpid RM1 1993
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
RED FOX Production 1/24 Audi RS5 DTM body (ISRA 2019), lexan, thickness .007" (0.175 mm) - #RFAUDIPROD19-07
PRODUCTION 1/24 Audi RS5 DTM BODY LEGAL FOR ISRA 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
PARMA PRO SCALE INTREPID .007" CLEAR BODY - #842A
PRODUCTION 1/32 INTERPID BODY
.007 Clear body with window paint masks for International 32 chassis.
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness, inches: .007
-
NeAn Clear body Eurosport 1/24 Cadillac, Lexan .01" (0.254 mm) - #154-LD
Clear body Eurosport 1/24 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .01" (0.254 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Zitec 04 S, Lexan .007" (0.175 mm) - #157PL
Clear body Eurosport 1/32 Zitec 04 S
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32U Audi R8, Lexan .007" (0.175 mm) - #160PL
NeAn Clear body Eurosport 1/32U Audi R8
This body is made according to ES-32 rules for chassis Production 1/32
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32U
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32U Audi R8, PVC .008" (0.2 mm) - #160P
NeAn Clear body Eurosport 1/32U Audi R8
This body is made according to ES-32 rules for chassis Production 1/32
- Made from: Polyvinyl chloride (PVC)
- For: Eurosport 1/32U
- Thickness: .008" (0.2 mm)
- Clear body
-
NeAn Clear Production 1/32 Ford C100 1981 body, Lexan thickness .005" (0.125 mm), w/paint masks - #181-L-5
NeAn Clear Production 1/32 Ford C100 1981 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Ford C100 1981 body, Lexan thickness .007" (0.175 mm), w/paint masks - #181-L-7
NeAn Clear Production 1/32 Ford C100 1981 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 TOJ TG 390 1981 body, Lexan thickness .005" (0.125 mm), w/paint masks - #182-L-5
NeAn Clear Production 1/32 TOJ TG 390 1981 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 TOJ TG 390 1981 body, Lexan thickness .007" (0.175 mm), w/paint masks - #182-L-7
NeAn Clear Production 1/32 TOJ TG 390 1981 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Porsche 936/936 Kremer CK5 1983 body, Lexan thickness .005" (0.125 mm), w/paint masks - #183-L-5
NeAn Clear Production 1/32 Porsche 936/936 Kremer CK5 1983 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Porsche 936/936 Kremer CK5 1983 body, Lexan thickness .007" (0.175 mm), w/paint masks - #183-L-7
NeAn Clear Production 1/32 Porsche 936/936 Kremer CK5 1983 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Porsche 962C 1987 body, Lexan thickness .005" (0.125 mm), w/paint masks - #184-L-5
NeAn Clear Production 1/32 Porsche 962C 1987 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Porsche 962C 1987 body, Lexan thickness .007" (0.175 mm), w/paint masks - #184-L-7
NeAn Clear Production 1/32 Porsche 962C 1987 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Peugeot 905 1990 body, Lexan thickness .005" (0.125 mm), w/paint masks - #185-L-5
NeAn Clear Production 1/32 Peugeot 905 1990 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Peugeot 905 1990 body, Lexan thickness .007" (0.175 mm), w/paint masks - #185-L-7
NeAn Clear Production 1/32 Peugeot 905 1990 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Jaguar XGR14 1991 body, Lexan thickness .005" (0.125 mm), w/paint masks - #186-L-5
NeAn Clear Production 1/32 Jaguar XGR14 1991 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Jaguar XGR14 1991 body, Lexan thickness .007" (0.175 mm), w/paint masks - #186-L-7
NeAn Clear Production 1/32 Jaguar XGR14 1991 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear body Eurosport 1/32 Cadillac Northstar LMP Race Car, Lexan .005" (0.125 mm) - #162-PLT
Clear body Eurosport 1/32 Cadillac Northstar LMP Race Car
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Cadillac Northstar LMP Race Car, Lexan .007" (0.175 mm) - #162-PL
Clear body Eurosport 1/32 Cadillac Northstar LMP Race Car
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24 Zitec 04 S, Lexan .005" (0.125 mm) - #156-PLT
Clear body Eurosport 1/24 Zitec 04 S
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
CAMEN Air control kit .005" skirtless - #5910.055
CAMEN Air control kit .004" skirtless - #5910.045
Air Control Kit including .014" Diaplane, .005" Non Skirted Side Dams and .005" Rear Spoiler
-
NeAn Clear body Eurosport 1/24 Zitec 04 S, Lexan .007" (0.175 mm) - #156-PL
Clear body Eurosport 1/24 Zitec 04 S
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear body Eurosport 1/32 Porsche 917, Lexan .005" (0.125 mm) - #K 022-005
Clear body Eurosport 1/32 Porsche 917
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24U Audi R8, Lexan .005" (0.125 mm) - #159-L-5
NeAn Clear body Eurosport 1/24U Audi R8
This body is made according to ES-24 rules for chassis Production 1/24
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
ATTAN Clear Body Production 1/24 Tesla Model S P100DL Electric GT (ISRA 2020), Lexan .007" (0.175 mm), with paint mask - #ATT2001
ATTAN Clear Body Production 1/24 Tesla Model S P100DL Electric GT LEGAL FOR ISRA 2020
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
ZHB LANE STICKERS, 100 sheets
ZHB LANE STICKERS, 100 sheets
Lane stickers for model, from 1 to 8 lane
-
NeAn Clear body Eurosport 1/24U Audi R8, Lexan .007" (0.175 mm) - #159-L-7
NeAn Clear body Eurosport 1/24U Audi R8
This body is made according to ES-24 rules for chassis Production 1/24
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24U Audi R8, PVC .008" (0.2 mm) - #159-P
NeAn Clear body Eurosport 1/24U Audi R8
This body is made according to ES-24 rules for chassis Production 1/24
- Made from: Polyvinyl chloride (PVC)
- For: Eurosport 1/24
- Thickness: .008" (0.2 mm)
- Clear body
-
BPA Clear body Eurosport 1/32 Porsche 917, Lexan .007" (0.175 mm) - #K 022-007
Clear body Eurosport 1/32 Porsche 917
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24 Cadillac Northstar LMP Race Car, Lexan .005" (0.125 mm) - #161-L-5
Clear body Eurosport 1/24 Cadillac Northstar LMP Race Car
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear body ES G12-32 Mercedes CLK LM, Lexan .005" (0.125 mm) - #K 051
Clear body ES G12-32 Mercedes CLK LM
- Made from: Polycarbonate (Lexan)
- For: ES G12-32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24 Cadillac Northstar LMP Race Car, Lexan .007" (0.175 mm) - #161-L-7
Clear body Eurosport 1/24 Cadillac Northstar LMP Race Car
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
Delta Plastic Clear Body Eurosport 1/24 Porsche, Lexan .005" (0.125 mm) - #DP25410-5
Delta Plastic Clear Body Eurosport 1/24 Porsche
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
Delta Plastic Clear Body Eurosport 1/24 Porsche, Lexan .007" (0.175 mm) - #DP25410-7
Delta Plastic Clear Body Eurosport 1/24 Porsche
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
Delta Plastic Clear Body Eurosport 1/24 Alpine A 480, Lexan .005" (0.125 mm) - #DP25411-5
Delta Plastic Clear Body Eurosport 1/24 Alpine A 480
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
Delta Plastic Clear Body Eurosport 1/24 Alpine A 480, Lexan .007" (0.175 mm) - #DP25411-7
Delta Plastic Clear Body Eurosport 1/24 Alpine A 480
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
SLICK7 .005X.007 WING KIT - #SL7-170
SL7-170 - .005 X .007 WING KIT
-
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 pc. - #M203T5
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 pc. - #M203T5
Lastest Pro design air kit with true .005" sidedams and .005" spoiler. For shorter cars
-
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 cd. (6 pc.) - #M203T5
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 cd. (6 pc.) - #M203T5
Lastest Pro design air kit with true .005" sidedams and .005" spoiler. For shorter cars
-
PARMA FLAMING DECAL SHEET - #10767
Many sets of logos to detail your stock cars, trucks, etc.
Sheet size 150x200 mm. They're printed on a thin, transparent film with a white substrate.
-
PARMA DRAG RACING DECAL SHEET - #747
Many sets of logos to detail your stock cars, trucks, etc.
Sheet size 150x200 mm. They're printed on a thin, transparent film with a white substrate.
-
SLOTLAB SPONSOR#14 STICKERS SHEET - #MS014
Size 60х75 mm. Printed on a transparent film with 2 layers - bottom white, top color
-
ZHB REINFORCED TAPE (w/linear reinforcement), 12 mm x 50 m - #922
A great option for the beginning racers!
-
DUBICK 3M reinforced strapping tape, linear reinforcement, 12 mm x 50 m
DUBICK 3M reinforced strapping tape, linear reinforcement, 12 mm x 50 m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
SLICK7 REINFORCED STRAPPING TAPE, 12 mm x 22 m - #S7-575
Excellent strapping tape. Takes up little space.
-
DUBICK 3M REINFORCED STRAPPING TAPE, .472" x 1968.5" (12 mm x 50 m) - #2073
DUBICK 3M REINFORCED STRAPPING TAPE, .472" x 1968.5" (12 mm x 50 m) - #2073
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
RED FOX Clear Production 1/32 Panoz HD body, Lexan thin .007” (0.175 mm) - #RFSC49C
Clear Production 1/32 Panoz HD body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body.
-
RED FOX Clear body Production 1/24 Corvette DTM (ISRA 2021), lexan, thickness .005" (0.125 mm), w/paint masks - #RFISRAVETTE5
RED FOX Clear body Production 1/24 Corvette DTM LEGAL FOR ISRA 2021
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
RED FOX Clear Production 1/32 Porsche HD body, Lexan thin .007” (0.175 mm) - #RFSC50C
Clear Production 1/32 Porsche HD body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body.
-
RED FOX Clear body Production 1/24 Corvette DTM (ISRA 2021), lexan, thickness .007" (0.175 mm), w/paint masks - #RFISRAVETTE7
RED FOX Clear body Production 1/24 Corvette DTM LEGAL FOR ISRA 2021
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
DELTA PLASTIC Clear body Production 1/24 Hyundai i30N turbo (ISRA 2024), lexan, thickness .005" (0.125 mm), w/paint masks and stickers - #DP25409-5
DELTA PLASTIC Clear body Production 1/24 Hyundai i30N turbo LEGAL FOR ISRA 2024
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Width: 81.15 mm (3.189")
- Clear body, with paint mask and stickers!
-
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 pc. - #M203T7-1
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 pc. - #M203T7-1
Lastest Pro design air kit with true .005" sidedams and .007" spoiler. For shorter cars
-
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 cd. (6 pc.) - #M203T7
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 cd. (6 pc.) - #M203T7
Lastest Pro design air kit with true .005" sidedams and .007" spoiler. For shorter cars
-
BPA Clear body G7, G27 Stratos, lexan, thickness .005" (0.125 mm) - #K 041
Clear body G7, G27 Stratos
- Made from: Polycarbonate (Lexan)
- For: G7
- Thickness: .005" (0.125 mm)
- Length: 5.807" (147.5 mm)
- Width: 3.11" (79 mm)
- Clear body.
-
DUBICK 3M REINFORCED STRAPPING TAPE, .984" x 1968.5" (25 mm x 50 m) - #2074
DUBICK 3M REINFORCED STRAPPING TAPE, .984" x 1968.5" (25 mm x 50 m) - #2074
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 1.968" x 1968.5" (50 mm x 50 m) - #2075
DUBICK 3M REINFORCED STRAPPING TAPE, 1.968" x 1968.5" (50 mm x 50 m) - #2075
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
CHICAGOLAND RACEWAY Double stick tape - #CR096
CHICAGOLAND RACEWAY Double stick tape - #CR096
-
3M DOUBLE-SIDED ADHESIVE TAPE, thickness 0.2 mm, width 6 mm, roll of 50 m - 9088
3M DOUBLE-SIDED ADHESIVE TAPE, thickness 0.2 mm, width 12 mm, roll of 50 m - 9088
-
SLICK7 Adhesive body tape 1/2" - #S7-570
SLICK7 Adhesive body tape 1/2" - #S7-570
Super strong pure adhesive tape for attaching side dams, spoilers, diaplanes or just .010 lexan plastic body re-inforcement.Comes in a HUGE 180foot roll, lasts for ever!just cut and stick on body or on plastic piece, then peel off release paper, and glue onto body for near permanent connection.Used by us for super stick lead, and secret of Pros for the last 20 years!
-
-
PARMA Clear Body 1/24 4.5" '95 Dodge Super Truck, Lexan .015" (0.381 mm), with paint mask - #1121C
PARMA Clear Body 1/24 4.5" '95 Dodge Super Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .015" (0.381 mm)
- Clear body with paint mask
-
PARMA Clear Body 1/24 4.5" '95 Chevy Super Truck, Lexan .015" (0.381 mm), with paint mask - #1123C
PARMA Clear Body 1/24 4.5" '95 Chevy Super Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .015" (0.381 mm)
- Clear body with paint mask
-
JK Clear Body 1/24 4" Super Truck - Caterpillar, Lexan .01" (0.25 mm), with paint mask - #B141B
JK Clear Body 1/24 4" Super Truck - Caterpillar
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .01" (0.25 mm)
- Clear body with paint mask
Old catalog #JK7403B
-
JK Clear Body 1/24 4.5" Chevy Nastruck, Lexan .007" (0.175 mm), with paint mask - #B69A
JK Clear Body 1/24 4.5" Chevy Nastruck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
Old catalog #JK71171A -
JK Clear Body 1/24 4.5" Chevy Nastruck, Lexan .010" (0.254 mm), with paint mask - #B69B
JK Clear Body 1/24 4.5" Chevy Nastruck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .010" (0.254 mm)
- Clear body with paint mask
Old catalog #JK71171B -
JK Clear Body 1/24 4.5" Dodge Nastruck, Lexan .007" (0.175 mm), with paint mask - #B71A
JK Clear Body 1/24 4.5" Dodge Nastruck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
Old catalog #JK71181A -
JK Clear Body 1/24 4.5" Dodge Nastruck, Lexan .010" (0.254 mm), with paint mask - #B71B
JK Clear Body 1/24 4.5" Dodge Nastruck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .010" (0.254 mm)
- Clear body with paint mask
Old catalog #JK71181B -
JK Clear Body 1/24 4.5" Toyota Nastruck, Lexan .010" (0.254 mm), with paint mask - #B81B
JK Clear Body 1/24 4.5" Toyota Nastruck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .010" (0.254 mm)
- Clear body with paint mask
Old catalog #JK7149B -
JK Clear Body 1/24 4.5" Ford Nastruck, Lexan .010" (0.254 mm), with paint mask - #B73B
JK Clear Body 1/24 4.5" Ford Nastruck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .010" (0.254 mm)
- Clear body with paint mask
Old catalog #JK71191B -
MID AMERICA Clear Body 1/24 4" Cab Over Race Truck, Lexan .007" (0.175 mm), with paint mask - #MID1010
MID AMERICA Clear Body 1/24 4" Cab Over Race Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
-
MID AMERICA Clear Body 1/24 4" Big Rig Race Truck, Lexan .007" (0.175 mm), with paint mask - #MID1011
MID AMERICA Clear Body 1/24 4" Big Rig Race Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
-
RALPH THORNE Clear Body 1/24 4" Isuzu Super Truck, Lexan .007" (0.175 mm), with paint mask - #RTR-7202A
RALPH THORNE Clear Body 1/24 4" Isuzu Super Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask & front wheels stickers
-
CAVEMAN Clear Body 1/24 4" Big Tire Race Truck, Lexan, with paint mask - #0098C
CAVEMAN Clear Body 1/24 4" Big Tire Race Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness:
- Clear body with paint mask
-
KOLHOZA Body Formula 1/32 Kolhoza Mercedes W07 Hybrid (#0114LT) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2027
KOLHOZA Body Formula 1/32 Kolhoza Mercedes W07 Hybrid (#0114LT) painted in livery F1 team Stewart SF3 1999, 1 pc.
- ISRA 2017-2019 "Mercedes W07 Hybrid"
- Made from LEXAN thickness .005"
- Really light body without any stickers, only painting
-
DELTA PLASTIC Clear body Production 1/24 Hyundai i30N turbo (ISRA 2024), lexan, thickness .007" (0.175 mm), w/paint masks and stickers - #DP25409-7
DELTA PLASTIC Clear body Production 1/24 Hyundai i30N turbo LEGAL FOR ISRA 2024
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Width: 81.15 mm (3.189")
- Clear body, with paint mask and stickers!
-
ATTAN Clear Body Production 1/24 Tesla Model S GT EVO I (ISRA 2025), Lexan .007" (0.175 mm), with paint mask - #2501
ATTAN Clear Body Production 1/24 Tesla Model S GT EVO I LEGAL FOR ISRA 2025
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Jordan EJ12 2002, 1 pc. - KZA#2037
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Jordan EJ12 2002, 1 pc. - KZA#2037
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team McLaren MP4, 1 pc. - KZA#2038
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team McLaren MP4, 1 pc. - KZA#2038
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Jordan 191 1991, 1 pc. - KZA#2039
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Jordan 191 1991, 1 pc. - KZA#2039
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Alpine A525 2025, 1 pc. - KZA#2040
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Alpine A525 2025, 1 pc. - KZA#2040
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Racing Bulls VCARB 02 2025, 1 pc. - KZA#2041
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Racing Bulls VCARB 02 2025, 1 pc. - KZA#2041
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team McLaren MCL38 2024 Monaco Grand Prix 2024, 1 pc. - KZA#2043
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team McLaren MCL38 2024 Monaco Grand Prix 2024, 1 pc. - KZA#2043
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Brawn BGP 001 2009, 1 pc. - KZA#2044
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Brawn BGP 001 2009, 1 pc. - KZA#2044
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
JK Custom Painted Body 4" Lola B12 LMP Martini 0.010" - #B114BU7
JKP Custom Painted Body 4" Lola B12 LMP Martini 0.010"
-
RED FOX Clear Production 1/32 Toyota GT body, Lexan thin .007” (0.175 mm) - #RFSC51C
Clear Production 1/32 Toyota GT body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body.
-
RED FOX Clear Production 1/32 Fast BS HD body (includes interrior), Lexan thin .007” (0.175 mm) - #RFSC52C
Clear Production 1/32 Fast BS HD body (includes interrior)
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body, includes interrior.
- Clear body, includes interrior.
-
KOLHOZA 1/32 Car interrior clear, thickness .005" (0.125 mm) - #0122
KOLHOZA 1/32 Car interrior
- clear,
- thickness .005" (0.125 mm).
-
BPA 1/32 Car interior clear, Lexan - #P 001
BPA 1/32 Car interior
- Made from: Polycarbonate (Lexan);
- For: 1/32 scale;
- Clear.
-
BPA 1/24 Car interior clear, Lexan - #P 011
BPA 1/24 Car interior
- Made from: Polycarbonate (Lexan);
- For: 1/24 scale;
- Clear.
-
NeAn Clear G7 LOLA 2007 BODY, Lexan, thickness .005" (0.125 mm) - #158-LT
Clear G7 LOLA 2007 BODY
- Made from: Polycarbonate (Lexan)
- For: G7
- Thickness: .005" (0.125 mm)
- Length: 5.921" (150.4 mm)
- Width: 3.15" (80 mm)
- Clear body
-
NeAn Clear G7 LOLA 2007 BODY, Lexan, thickness .007" (0.175 mm) - #158-L
G7 LOLA 2007 BODY
- Made from: Polycarbonate (Lexan)
- For: G7
- Thickness: .007" (0.175 mm)
- Length: 5.921" (150.4 mm)
- Width: 3.15" (80 mm)
- Clear body
-
NeAn Clear G7 LOLA 2007 BODY, PVC, thickness .015" (0.4 mm) - #158P
G7 LOLA 2007 BODY
- Made from: Polyvinyl chloride (PVC)
- For: G7
- Thickness: .015" (0.4 mm)
- Length: 5.921" (150.4 mm)
- Width: 3.15" (80 mm)
- Clear body
-
REDFOX Clear body Wing-style, Corvette hype wing car, lexan, thickness .005" (0.125 mm) - #RFST19C5R
Clear body Wing-style, Corvette hype wing car
- Made from: Polycarbonate (Lexan)
- For: Wing-style
- Thickness: .005" (0.125 mm)
- Clear body.
-
REDFOX Clear body Wing-style, Shadow wing w/rib, lexan, thickness .005" (0.125 mm) - #RFST18C5R
Clear body Wing-style, Shadow wing w/rib
- Made from: Polycarbonate (Lexan)
- For: Wing-style
- Thickness: .005" (0.125 mm)
- Clear body.
-
REDFOX Clear body Wing-style, Foxtail wing body w/rib, lexan, thickness .005" (0.125 mm) - #RFST17C5R
Clear body Wing-style, Foxtail wing body w/rib
- Made from: Polycarbonate (Lexan)
- For: Wing-style
- Thickness: .005" (0.125 mm)
- Clear body.
-
PARMA LARGE POLYCARBONATE SHEET, thick. .040" (1,02 mm), dim.: 292 x 330 mm, sheet - #10417
Looking to build a custom wing or body part? Our .040" clear polycarbonate sheet is 11 1/2" x 13" and has many uses for custom building.
-
DUBICK JK style body mounting clips, pair - #601
DUBICK JK style body mounting clips, pair - #601
Body mounting clip - same size as JK 9008
-
KOFORD Premium glass strapping tape - #M464
KOFORD Premium glass strapping tape - #M464
Highest strength glass strapping tape for body pin reinforcement.
-
JK Body mounting clips 4.5 " (for 1/24 JK 4" "Cheetah X25" chassis), pair - #U44
JK Body mounting clips 4.5 " (for 1/24 JK 4" "Cheetah X25" chassis), pair - #U44
Clip for C21, C24, C25, C26, C40, C41, C45, C55, C60, C64, C80, C81 Chassis
Old catalog #JK9008
-
JK Cheetah .7 F1/INDY body clips (for 1/32 "Cheetah 11" chassis), pair - #U46
JK Cheetah .7 F1/INDY body clips (for 1/32 "Cheetah 11" chassis), pair - #U46
Clip for C1, C5, C10, C30, C35, C93 Chassis, 2" Spacing
Old catalog #JK9010
-
JK Lane Stickers (8 sheets) - #S1-8
JK Lane Stickers (8 sheets) - #S1-8
LANE STICKERS - 8SHEETS W/LANE# AND CHANGE INFO
Old catalog #JK150
-
JK Lane Stickers, (200 Sheets) - #S1-200
JK Lane Stickers, (200 Sheets) - #S1-200
LANE STICKERS - 200SHEETS W/LANE# AND CHANGE INFO
Old catalog #JK150B
-
KOFORD Lane stickers, 6 sheets - #M557
KOFORD Lane stickers, 6 sheets - #M557
Big bright stickely lane stickers. 6 sheets of 8 colors per package.
