72 Pitch
-
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
-
S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722
S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722
-
CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402
ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402
-
CAHOZA GEAR 72 PITCH 40T, 0° angle, 2 mm. axle, Ø14.8 mm - #5-B-2
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 2 mm axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24
-
JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332
-
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled
Suitable for ES 1/24
-
S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172
S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172
-
BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle - #BSV72412
BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle - #BSV72412
-
BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72412longled
BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72412longled
Suitable for ES 1/24
-
S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722
S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722
-
CAHOZA POLYMER GEAR 72 PITCH, 41T, 0° ANGLE, 3/32" AXLE, Ø15.2 mm - #5
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24 -
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
-
ARP PINION 72 PITCH, 7T, 0° angle, 1.5 mm bore (FOR F1/32) - #ARP7207-1,5 mm
Same as 7207 execpt for 1.5mm shaft instead of standard 2mm - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ATTAN GEAR 72 PITCH 43T, 16° angle, 3/32" axle - #ATT724316
ATTAN GEAR 72 PITCH 43T, 16° angle, 3/32" axle - #ATT724316
-
ARP EDM Pinion 72 pitch 7 teeth, 0° angle 2 mm bore - #ARP7207EDM
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, 3/32" AXLE, Ø15,7 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
-
JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw - #G743D
JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw - #G743D
Old catalog #JK724315
-
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm - #4-B
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant.