72 Pitch

• 

  ARP heat treated pinion 72 pitch 5 teeth, 0° angle 1.2 mm bore. Certified to RC55 - #7205H

  10.95 $

• 

  CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.2 mm bore - #17A

  CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.2 mm bore - #17A

  EDM pinions 72 pitch 5T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  34.00 $

• 

  S&K Gear 72 PITCH 41T, 16° angle, 3/32" axle, Ø14.9 mm - #SK4172A

  S&K Gear 72 PITCH 41T, 16° angle, 3/32" axle,  Ø14.9 mm - #SK4172A

  5.00 $

• 

  BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle, Ø13.58 mm (Ø.535") - #BSV7237332

  BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle, Ø13.58 mm (Ø.535") - #BSV7237332

  4.30 $

• 

  BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7237332led

  BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle, with a short hub, for gluing  - #BSV7237332led

  Suitable for ES 1/32

  4.30 $

• 

  CAHOZA Gear 72 pitch 41T, 16° angle, 3/32" axle, Ø15.06 mm (Ø.593") - #4

  CAHOZA Gear 72 pitch 41T, 16° angle, 3/32" axle,  Ø15.06 mm (Ø.593") - #4

  polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion

  5.40 $

• 

  BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle, Ø13.58 mm (Ø.535") - #BSV72372

  BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle, Ø13.58 mm (Ø.535") - #BSV72372

  4.30 $

• 

  BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72372led

  BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle, with a short hub, for gluing  - #BSV72372led

  Suitable for ES 1/32

  4.30 $

• 

  S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm - #SK37722

  S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm - #SK37722

  available only for special order!

  5.81 $

• 

  S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK37722G

  S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK37722G

  available only for special order!

  5.81 $

• 

  BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle, Ø13.95 mm (Ø.549") - #BSV72382

  BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle, Ø13.95 mm (Ø.549") - #BSV72382

  4.30 $

• 

  BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72382led

  BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle, with a short hub, for gluing  - #BSV72382led

  Suitable for ES 1/32

  4.30 $

• 

  S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. - #SK38722

  S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. - #SK38722

  5.81 $

• 

  S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK38722G

  S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK38722G

  5.81 $

• 

  BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle, Ø13.95 mm (Ø.549") - #BSV7238332

  BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle, Ø13.95 mm (Ø.549") - #BSV7238332

  4.30 $

• 

  BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7238332led

  BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle, with a short hub, for gluing  - #BSV7238332led

  Suitable for ES 1/32

  4.30 $

• 

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm (.570") - #5-BC

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm (.570") - #5-BC

  highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T,

  6.40 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#230

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.32 mm (Ø.564") - #BSV7239332

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.32 mm (Ø.564") - #BSV7239332

  4.30 $

• 

  ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382

  ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382

  5.81 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7239332led

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing  - #BSV7239332led

  Suitable for ES 1/32

  4.30 $

• 

  BSV Gear 72 pitch, 42T, 6° angle, 3/32" axle, Ø15.0 mm - #BSV72426

  BSV Gear 72 pitch, 42T, 6° angle, 3/32" axle, Ø15.0 mm - #BSV72426

  3.70 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7239332longled

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7239332longled

  Suitable for ES 1/24

  4.30 $

• 

  CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm (Ø.557") - #5-B-2

  CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm (Ø.557") - #5-B-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  6.40 $

• 

  HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5

  HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5

  29.07 $

• 

  CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  EDM pinions 72 pitch 5T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  34.00 $

• 

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

  EDM pinions 72 pitch 6T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  34.00 $

• 

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

  EDM pinions 72 pitch 6T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  34.00 $

• 

  ARP PINION 72 PITCH, 6T, 0° angle, 1.5 mm bore (FOR F1/32) - ARP#7206-1,5 mm

  1.5 mm shaft - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  
  

  7.96 $

• 

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-BC-2

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-BC-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth

  6.40 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, Ø14.32 mm (Ø.564") - #BSV72392

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, Ø14.32 mm (Ø.564") - #BSV72392

  4.30 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72392led

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing  - #BSV72392led

  Suitable for ES 1/32

  4.30 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72392longled

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72392longled

  Suitable for ES 1/24

  4.30 $

• 

  S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722

  S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722

  5.81 $

• 

  ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392

  ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392

  5.81 $

• 

  CAHOZA Highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.50 mm (Ø.570")- #5-B

  CAHOZA Highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.50 mm  (Ø.570")- #5-B

  highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  6.40 $

• 

  BSV Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.50 mm - #BSV724216

  BSV Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.50 mm - #BSV724216

  3.70 $

• 

  ATTAN GEAR 72 PITCH 42T, 16° angle, 3/32" axle - #ATT724216

  ATTAN GEAR 72 PITCH 42T, 16° angle, 3/32" axle - #ATT724216

  5.81 $

• 

  CAHOZA Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.38 mm (Ø.605") - #4

  CAHOZA Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.38 mm (Ø.605") - #4

  polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion

  5.40 $

• 

  CAHOZA Highly durable gear 72 pitch, 42T, 16° angle, big hub, 3/32" axle, Ø15.38 mm (Ø.605") - #4-B

  CAHOZA Highly durable gear 72 pitch, 42T, 16° angle, big hub, 3/32" axle, Ø15.38 mm (Ø.605") - #4-B

  Highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 41T, 42T, 43T and 44T, angled by 16°

  6.40 $

• 

  ARP PLASTIC SPUR GEAR 72 PITCH, 42T, 15° angle, 3/32" axle, Ø15.38 mm - #ARP7242BP

  72 pitch Pro Series Spur Gear - 42 tooth 15 degree angle plastic spur for 3/32 axle

  7.30 $

• 

  BSV Gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.70 mm - #BSV724316

  BSV Gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.70 mm - #BSV724316

  3.70 $

• 

  S&K Gear 72 PITCH 43T, 16° angle, 3/32" axle, Ø15.78 mm - #SK4372A

  S&K Gear 72 PITCH 43T, 16° angle, 3/32" axle,  Ø15.78 mm - #SK4372A

  5.81 $

• 

  S&K 72 PITCH 39T, 0° angle, 3/32" axle, Ø14.3 мм, glued on 3/32" Proslot axle - ZHB#223

  he hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#229

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, Ø14.98 mm (Ø.590") - #BSV7240332

  BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, Ø14.98 mm (Ø.590") - #BSV7240332

  4.30 $

• 

  CAHOZA Highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-B-2

  CAHOZA Highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-B-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  6.40 $

• 

  CAHOZA Highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570"), 12 pc - #5-B-2

  CAHOZA Highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570"), 12 pc - #5-B-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  74.40 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7240332longled

  BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7240332longled

  Suitable for ES 1/24

  4.30 $

• 

  CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740

  JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740

  Old catalog #JK7240

  5.49 $

• 

  JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw, 1 cd. (6 ea.) - #G740-6

  JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw, 1 cd. (6 ea.) - #G740-6

  Old catalog #JK7240

  29.93 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, Ø14.98 mm (Ø.590") - #BSV72402

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, Ø14.98 mm (Ø.590") - #BSV72402

  4.30 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72402longled

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72402longled

  Suitable for ES 1/24

  4.30 $

• 

  S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072

  S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072

  5.81 $

• 

  JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m

  JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m

  Old catalog #JK72402

  5.49 $

• 

  JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw, 1 cd. (6 ea.) - #G740m-6

  JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw, 1 cd. (6 ea.) - #G740m-6

  Old catalog #JK72402

  29.93 $

• 

  CAHOZA Gear 72 pitch 40T, 0° angle, 3/32" axle, Ø14.85 mm (Ø.584") - #5

  CAHOZA Gear 72 pitch 40T, 0° angle, 3/32" axle, Ø14.85 mm (Ø.584") - #5

  polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24

  5.40 $

• 

  ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle - #ATT7240

  ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle, - #ATT7240

  
  

  5.81 $

• 

  S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402

  ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402

  5.81 $

• 

  CAHOZA Highly durable gear 72 pitch 40T, 0° angle, 2 mm. axle, Ø14.8 mm (Ø.584") - #5-B-2

  CAHOZA Highly durable gear 72 pitch 40T, 0° angle, 2 mm. axle, Ø14.8 mm (Ø.584") - #5-B-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  6.40 $

• 

  CAHOZA Drilled Highly durable gear 72 pitch 40 teeth, 0° angle, 2 mm axle (with reduced weight), Ø14.85 mm (Ø.584") - #10

  CAHOZA Drilled Highly durable gear 72 pitch 40 teeth, 0° angle, 2 mm axle (with reduced weight), Ø14.85 mm (Ø.584") - #10

  highly durable gears on small hub for 2mm axle, gears are drilled

  7.80 $

• ATTAN 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, Ø15.00 mm (Ø.590") - #BSV7241332

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, Ø15.00 mm (Ø.590") - #BSV7241332

  4.30 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7241332longled

  Suitable for ES 1/24

  4.30 $

• 

  S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172

  S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172

  5.81 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, Ø15.00 mm (Ø.590") - #BSV72412

  BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, Ø15.00 mm (Ø.590") - #BSV72412

  4.30 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72412longled

  BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72412longled

  Suitable for ES 1/24

  4.30 $

• 

  S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722

  S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722

  5.00 $

• 

  CAHOZA Gear 72 pitch, 41T, 0° angle, 3/32" axle, Ø15.2 mm (Ø.598") - #5

  CAHOZA Gear 72 pitch, 41T, 0° angle, 3/32" axle, Ø15.2 mm (Ø.598") - #5

  polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24

  5.40 $

• 

  ARP PINION 72 PITCH, 7T, 0° angle, 1.5 mm bore (FOR F1/32) - #ARP7207-1,5 mm

  Same as 7207 execpt for 1.5mm shaft instead of standard 2mm - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.99 $

• 

  ATTAN GEAR 72 PITCH 43T, 16° angle, 3/32" axle - #ATT724316

  ATTAN GEAR 72 PITCH 43T, 16° angle, 3/32" axle - #ATT724316

  5.81 $

• 

  CAHOZA Gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.72 mm (Ø.618") - #4

  CAHOZA Gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.72 mm (Ø.618") - #4

  polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion

  5.40 $

• 

  CAHOZA Gear 72 pitch, 43T, 2° angle, 3/32" axle, Ø15.75 mm (Ø.620") - #3

  CAHOZA Gear 72 pitch, 43T, 2° angle, 3/32" axle, Ø15.75 mm (Ø.620") - #3

  polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 2°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories

  5.40 $

• 

  JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw - #G743D

  JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle,  w/screw - #G743D

  Old catalog #JK724315

  5.49 $

• 

  JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw, 1 cd. (6 ea.) - #G743D-6

  JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw, 1 cd. (6 ea.) - #G743D-6

  Old catalog #JK724315

  29.93 $

• 

  CAHOZA Highly durable gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.72 mm (Ø.618") - #4-B

  CAHOZA Highly durable gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.72 mm (Ø.618") - #4-B

  highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  6.40 $

• 

  ARP Plastic spur gear 72 pitch, 43T, 15° angle, 3/32" axle - #arp7243bp

  ARP Plastic spur gear 72 pitch, 43T, 15° angle, 3/32" axle - #arp7243bp

  7.35 $

• 

  ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle - #ARP7243SP

  ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle - #ARP7243SP

  Actual photo will be added soon :)

  9.49 $

• 

  ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle, 1 cd. (6 pcs.) - #ARP7243SP

  ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle, 1 cd. (6 pcs.) - #ARP7243SP

  Actual photo will be added soon :)

  56.94 $

• 

  S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272

  S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272

  5.00 $

• 

  S&K Gear 72 pitch 42 teeth, 0° angle, 3/32" axle, Ø15.46 mm glyed on Proslor axle - #225

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  15.12 $

• 

  BSV Gear 72 pitch, 44T, 16° angle, 3/32" axle, Ø16.09 mm - #BSV724416

  BSV Gear 72 pitch, 44T, 16° angle, 3/32" axle, Ø16.09 mm - #BSV724416

  3.70 $

• 

  S&K Gear 72 pitch 44 teeth, 16° angle, 3/32" axle, Ø15.8 mm - #SK4472A

  S&K Gear 72 pitch 44 teeth, 16° angle, 3/32" axle, Ø15.8 mm - #SK4472A

  5.81 $

• 

  ARP PINION 72 PITCH, 7T, 0° angle, 2 mm bore - #ARP7207

  72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness.

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  
  

  7.99 $

• 

  HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore

  HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore 

  29.07 $

• 

  CAHOZA Black covered pinion 72 pitch 7 teeth, 0° angle 2 mm bore - #15

  CAHOZA Black covered pinion 72 pitch 7 teeth, 0° angle 2 mm bore - #15

  EDM pinions 72 pitch 7T - 2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  34.00 $

• 

  ARP PINION 72 PITCH, 8T, 0° angle, 2 mm bore - #ARP7208

  72 pitch stainless steel 8 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.99 $

• 

  ARP PINION 72 PITCH, 9T, 0° angle, 2 mm bore - #ARP7209

  72 pitch stainless steel 9 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.99 $

• 

  ARP Pinion 72 pitch, 9T, 5° angle, 2 mm bore - #ARP7209A

  ARP Pinion 72 pitch, 9T, 5° angle, 2 mm bore - #ARP7209A

  72 pitch stainless steel 9 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.99 $

• 

  KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677

  KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677

  Pinned 9T 3° angled Black Diamond coated pinions for G7 racing. Coating reduces friction and prevents solder from flowing into teeth. Use with M636 pinion wire.

  11.27 $

• 

  ARP Pinion 72 pitch, 10T, 5° angle, 2 mm bore - #arp7210A

  ARP Pinion 72 pitch, 10T, 5° angle, 2 mm bore - #arp7210A

  72 pitch stainless steel 10 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.99 $

• 

  KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S

  KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S

  Black Diamond coated hardened 11 tooth straight pinion with boss. Coating reduces friction and prevents solder flowing into teeth.

  7.75 $

• 

  KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11

  KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11

  Black Diamond coated hardened 11 tooth 5 degree angled pinion with boss. Coating reduces friction and prevents solder flowing into teeth.

  7.75 $

• 

  ARP PINION 72 PITCH, 11T, 0° angle, 2 mm bore - #ARP7211

  ARP PINION 72 PITCH, 11T, 0° angle, 2 mm bore - #ARP7211

  72 pitch stainless steel 11 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.98 $

• 

  ARP Pinion 72 pitch, 11T, 5° angle, 2 mm bore - #ARP7211A

  ARP Pinion 72 pitch, 11T, 5° angle, 2 mm bore - #ARP7211A

  72 pitch stainless steel 11 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.98 $

• 

  ARP Pinion 72 pitch, 12T, 0° angle, 2 mm bore - #ARP7212

  ARP Pinion 72 pitch, 12T, 0° angle, 2 mm bore - #ARP7212

  72 pitch stainless steel 12 tooth pinion gears heat treated to 36-38 hardness

  7.99 $

• 

  ARP Pinion 72 pitch, 12T, 5° angle, 2 mm bore - #arp7212A

  ARP Pinion 72 pitch, 12T, 5° angle, 2 mm bore - #arp7212A

  72 pitch stainless steel 12 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.99 $

• 

  ARP Pinion 72 pitch, 13T, 0° angle, 2 mm bore - #arp7213s

  ARP Pinion 72 pitch, 13T, 0° angle, 2 mm bore - #arp7213s

  72 pitch stainless steel 13 tooth pinion gears heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 13T, 5° angle, 2 mm bore - #arp7213a

  ARP Pinion 72 pitch, 13T, 5° angle, 2 mm bore - #arp7213a

  72 pitch stainless steel 13 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 14T, 0° angle, 2 mm bore - #arp7214s

  ARP Pinion 72 pitch, 14T, 0° angle, 2 mm bore - #arp7214s

  72 pitch stainless steel 14 tooth pinion gears heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 14T, 5° angle, 2 mm bore - #arp7214a

  ARP Pinion 72 pitch, 14T, 5° angle, 2 mm bore - #arp7214a

  72 pitch stainless steel 14 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 15T, 0° angle, 2 mm bore - #arp7215s

  ARP Pinion 72 pitch, 15T, 0° angle, 2 mm bore - #arp7215s

  72 pitch stainless steel 15 tooth pinion gears heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 15T, 5° angle, 2 mm bore - #arp7215a

  ARP Pinion 72 pitch, 15T, 5° angle, 2 mm bore - #arp7215a

  72 pitch stainless steel 15 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.96 $

• 

  ATTAN GEAR 72 PITCH 44T, 16° angle, 3/32" axle - #ATT724416

  ATTAN GEAR 72 PITCH 44T, 16° angle, 3/32" axle - #ATT724416

  5.81 $

• 

  CAHOZA Gear 72 pitch, 44T, 16° angle, 3/32" axle, Ø16.05 mm (Ø.632") - #4

  CAHOZA Gear 72 pitch, 44T, 16° angle, 3/32" axle,  Ø16.05 mm (Ø.632") - #4

  polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion

  5.40 $

• 

  JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D

  JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D

  Old catalog #JK724415

  5.49 $

• 

  JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw, 1 cd. (6 ea.) - #G744D-6

  JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw, 1 cd. (6 ea.) - #G744D-6

  Old catalog #JK724415

  29.93 $

You viewed: