72 Pitch

• 

  ARP heat treated pinion 72 pitch 5 teeth, 0° angle 1.2 mm bore. Certified to RC55 - #7205H

  10.95 $

• 

  Cahoza black covered pinion 72 pitch 5 teeth, 0° angle 1.2 mm bore - #17A

  34.00 $

• 

  S&K Gear 72 PITCH 41T, 16° angle, 3/32" axle, Ø14.9 mm - #SK4172A

  S&K Gear 72 PITCH 41T, 16° angle, 3/32" axle,  Ø14.9 mm - #SK4172A

  4.16 $

• 

  BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle - #BSV7237332

  BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle - #BSV7237332

  3.70 $

• 

  BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7237332led

  BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle, with a short hub, for gluing  - #BSV7237332led

  Suitable for ES 1/32

  3.70 $

• 

  S&K GEAR 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.2 mm - #SK3772

  S&K GEAR 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.2 mm - #SK3772

  available only for special order!

  4.16 $

• 

  CAHOZA GEAR 72 PITCH 41T, 16° angle, 3/32" axle, Ø15.05 mm - #4

  CAHOZA GEAR 72 PITCH 41T, 16° angle, 3/32" axle,  Ø15.05 mm - #4

  5.20 $

• 

  BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle - #BSV72372

  BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle - #BSV72372

  3.70 $

• 

  BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72372led

  BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle, with a short hub, for gluing  - #BSV72372led

  Suitable for ES 1/32

  3.70 $

• 

  S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm - #SK37722

  S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm - #SK37722

  available only for special order!

  4.16 $

• 

  S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK37722G

  S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK37722G

  available only for special order!

  4.37 $

• 

  BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle - #BSV72382

  BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle - #BSV72382

  3.70 $

• 

  BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72382led

  BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle, with a short hub, for gluing  - #BSV72382led

  Suitable for ES 1/32

  3.70 $

• 

  S&K GEAR 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.2 mm. For gluing. - #SK3772G

  S&K GEAR 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.2 mm. For gluing. - #SK3772G

  4.37 $

• 

  S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. - #SK38722

  S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. - #SK38722

  4.16 $

• 

  S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK38722G

  S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK38722G

  4.37 $

• 

  VITULA Gear 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.8 mm - #SG770

  VITULA Gear 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.8 mm - #SG770

  5.79 $

• 

  BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle - #BSV7238332

  BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle - #BSV7238332

  3.70 $

• 

  BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7238332led

  BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle, with a short hub, for gluing  - #BSV7238332led

  Suitable for ES 1/32

  3.70 $

• 

  S&K GEAR 72 PITCH, 38T, 0° angle, 3/32" axle, Ø14.2 mm. - #SK3872

  S&K GEAR 72 PITCH, 38T, 0° angle, 3/32" axle, Ø14.2 mm. - #SK3872

  4.16 $

• 

  S&K GEAR 72 PITCH, 38T, 0° angle, 3/32" axle, Ø14.2 mm. For gluing. - #SK3872G

  S&K GEAR 72 PITCH, 38T, 0° angle, 3/32" axle, Ø14.2 mm. For gluing. - #SK3872G

  4.37 $

• 

  CAHOZA highly durable gear 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5B

  CAHOZA highly durable gear 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm

  6.40 $

• 

  CAHOZA highly durable gear corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5BC

  CAHOZA highly durable gear corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm

  6.40 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#230

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle - #BSV7239332

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle - #BSV7239332

  3.70 $

• 

  ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382

  ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382

  5.26 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7239332led

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing  - #BSV7239332led

  Suitable for ES 1/32

  3.70 $

• 

  BSV Gear 72 pitch, 42T, 6° angle, 3/32" axle, Ø15.0 mm - #BSV72426

  BSV Gear 72 pitch, 42T, 6° angle, 3/32" axle, Ø15.0 mm - #BSV72426

  3.70 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7239332longled

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7239332longled

  Suitable for ES 1/24

  3.70 $

• 

  S&K GEAR 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.3 mm - #SK3972

  S&K GEAR 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.3 mm - #SK3972

  4.16 $

• 

  S&K Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.16 mm. For gluing. - #SK3972G

  S&K Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.16 mm. For gluing. - #SK3972G

  4.37 $

• 

  VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing - #SG790g

  VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing  - #SG790g

  5.26 $

• 

  VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790

  VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790

  5.79 $

• 

  ATTAN Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.15 mm - #ATT7239

  ATTAN Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.15 mm - #ATT7239

  5.26 $

• 

  CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #5-B-2

  CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #5-B-2

  6.40 $

• 

  HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5

  HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5

  26.32 $

• 

  VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515

  VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515

  33.68 $

• 

  Cahoza black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  34.00 $

• 

  Cahoza black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

  34.00 $

• 

  Cahoza black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

  34.00 $

• 

  ARP PINION 72 PITCH, 6T, 0° angle, 1.5 mm bore (FOR F1/32) - ARP#7206-1,5 mm

  1.5 mm shaft - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  
  

  7.96 $

• 

  CAHOZA Highly durable gear corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5-BC-2

  CAHOZA Highly durable gear corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5-BC-2

  6.40 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle - #BSV72392

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle - #BSV72392

  3.70 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72392led

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing  - #BSV72392led

  Suitable for ES 1/32

  3.70 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72392longled

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72392longled

  Suitable for ES 1/24

  3.70 $

• 

  S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722

  S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722

  4.16 $

• 

  ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392

  ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392

  5.26 $

• 

  CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5B

  CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.52 mm

  6.40 $

• 

  BSV Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.50 mm - #BSV724216

  BSV Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.50 mm - #BSV724216

  3.70 $

• 

  S&K Gear 72 PITCH 42T, 16° angle, 3/32" axle, Ø15.35 mm - #SK4272A

  S&K Gear 72 PITCH 42T, 16° angle, 3/32" axle,  Ø15.35 mm - #SK4272A

  4.16 $

• 

  ATTAN GEAR 72 PITCH 42T, 16° angle, 3/32" axle - #ATT724216

  ATTAN GEAR 72 PITCH 42T, 16° angle, 3/32" axle - #ATT724216

  5.26 $

• 

  CAHOZA POLYMER GEAR 72 PITCH, 42T, 16° ANGLE, 3/32" AXLE, Ø15.38 mm - #4

  POLYMER GEARS 72 PITCH ANGLED 16°
  polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories

  5.20 $

• 

  CAHOZA POLYMER GEAR 72 PITCH, 42T, 16° ANGLE, big hub, 3/32" AXLE, Ø15,38 mm, stronger - #4-B

  HIGHLY DURABLE GEARS 72 PITCH ANGLED 16°
  new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 42 teeth, angled by 16°

  6.20 $

• 

  ARP PLASTIC SPUR GEAR 72 PITCH, 42T, 15° angle, 3/32" axle, Ø15.38 mm - #ARP7242BP

  72 pitch Pro Series Spur Gear - 42 tooth 15 degree angle plastic spur for 3/32 axle

  7.30 $

• 

  BSV Gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.70 mm - #BSV724316

  BSV Gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.70 mm - #BSV724316

  3.70 $

• 

  S&K Gear 72 PITCH 43T, 16° angle, 3/32" axle, Ø15.78 mm - #SK4372A

  S&K Gear 72 PITCH 43T, 16° angle, 3/32" axle,  Ø15.78 mm - #SK4372A

  4.16 $

• 

  S&K 72 PITCH 39T, 0° angle, 3/32" axle, Ø14.3 мм, glued on 3/32" Proslot axle - ZHB#223

  he hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#229

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle - #BSV7240332

  BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle - #BSV7240332

  3.70 $

• 

  CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5B2 (CAH7239)

  CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm

  6.40 $

• 

  CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm, 12 pc - #5B2 (CAH7239)

  CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm

  74.40 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7240332longled

  BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7240332longled

  Suitable for ES 1/24

  3.70 $

• 

  CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740

  JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740

  Old catalog #JK7240

  4.99 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle - #BSV72402

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle - #BSV72402

  3.70 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72402longled

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72402longled

  Suitable for ES 1/24

  3.70 $

• 

  S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072

  S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072

  4.16 $

• 

  JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m

  JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m

  Old catalog #JK72402

  4.99 $

• 

  S&K Gear 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.58 mm. For gluing. - #SK4072G

  S&K Gear 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.58 mm. For gluing. - #SK4072G

  4.37 $

• 

  CAHOZA GEAR 72 PITCH 40T, 0° angle, 3/32" axle, Ø14.85 mm - #5

  POLYMER GEARS 72 PITCH STRAIGHT ELITE
  polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24

  4.90 $

• 

  ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle - #ATT7240

  ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle, - #ATT7240

  
  

  5.26 $

• 

  Сahoza highly durable gear 72 pitch 40 teeth, 0° angle, 3/32" axle, Ø14.85 mm - #5B

  6.40 $

• 

  CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9

  CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9

  6.60 $

• 

  S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722

  S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722

  4.16 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402

  ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402

  5.26 $

• 

  CAHOZA GEAR 72 PITCH 40T, 0° angle, 2 mm. axle, Ø14.8 mm - #5-B-2

  POLYMER GEARS 72 PITCH STRAIGHT ELITE

  polymer gears 72 pitch, for 2 mm axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24

  6.40 $

• 

  JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332

  3.70 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7241332longled

  Suitable for ES 1/24

  3.70 $

• 

  S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172

  S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172

  4.16 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle - #BSV72412

  BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle - #BSV72412

  3.70 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72412longled

  BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72412longled

  Suitable for ES 1/24

  3.70 $

• 

  S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722

  S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722

  4.16 $

• 

  CAHOZA POLYMER GEAR 72 PITCH, 41T, 0° ANGLE, 3/32" AXLE, Ø15.2 mm - #5

  POLYMER GEARS 72 PITCH STRAIGHT ELITE
  polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24

  4.90 $

• 

  HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)

  HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)

  26.32 $

• 

  ARP PINION 72 PITCH, 7T, 0° angle, 1.5 mm bore (FOR F1/32) - #ARP7207-1,5 mm

  Same as 7207 execpt for 1.5mm shaft instead of standard 2mm - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.99 $

• 

  ATTAN GEAR 72 PITCH 43T, 16° angle, 3/32" axle - #ATT724316

  ATTAN GEAR 72 PITCH 43T, 16° angle, 3/32" axle - #ATT724316

  5.26 $

• 

  ARP EDM Pinion 72 pitch 7 teeth, 0° angle 2 mm bore - #ARP7207EDM

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  
  

  23.95 $

• 

  CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, 3/32" AXLE, Ø15,7 mm - #4

  POLYMER GEARS 72 PITCH ANGLED 16°
  polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories

  5.20 $

• 

  CAHOZA POLYMER GEAR 72 PITCH, 43T, 2° ANGLE, 3/32" AXLE, Ø15,78 mm - #3

  3.95 $

• 

  JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw - #G743D

  JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle,  w/screw - #G743D

  Old catalog #JK724315

  4.99 $

• 

  CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm - #4-B

  CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE,  HIGH DURABLE,3/32" AXLE, Ø15,72 mm

  new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant.

  6.20 $

• 

  ARP Plastic spur gear 72 pitch, 43T, 15° angle, 3/32" axle - #arp7243bp

  ARP Plastic spur gear 72 pitch, 43T, 15° angle, 3/32" axle - #arp7243bp

  7.35 $

• 

  ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle - #ARP7243SP

  ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle - #ARP7243SP

  Actual photo will be added soon :)

  9.49 $

• 

  ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle, 1 cd. (6 pcs.) - #ARP7243SP

  ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle, 1 cd. (6 pcs.) - #ARP7243SP

  Actual photo will be added soon :)

  56.94 $

• 

  S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272

  S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272

  4.16 $

• 

  S&K Gear 72 pitch 42 teeth, 0° angle, 3/32" axle, Ø15.46 mm glyed on Proslor axle - #225

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  BSV Gear 72 pitch, 44T, 16° angle, 3/32" axle, Ø16.09 mm - #BSV724416

  BSV Gear 72 pitch, 44T, 16° angle, 3/32" axle, Ø16.09 mm - #BSV724416

  3.70 $

• 

  S&K Gear 72 pitch 44 teeth, 16° angle, 3/32" axle, Ø15.8 mm - #SK4472A

  S&K Gear 72 pitch 44 teeth, 16° angle, 3/32" axle, Ø15.8 mm - #SK4472A

  4.16 $

• 

  ARP PINION 72 PITCH, 7T, 0° angle, 2 mm bore - #ARP7207

  72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness.

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  
  

  7.99 $

• 

  HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore

  HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore 

  26.32 $

• 

  Cahoza black covered pinion 72 pitch 7 teeth, 0° angle 2 mm bore - #15

  34.00 $

• 

  ARP PINION 72 PITCH, 8T, 0° angle, 2 mm bore - #ARP7208

  72 pitch stainless steel 8 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.99 $

• 

  ARP PINION 72 PITCH, 9T, 0° angle, 2 mm bore - #ARP7209

  72 pitch stainless steel 9 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.99 $

• 

  ARP Pinion 72 pitch, 9T, 5° angle, 2 mm bore - #ARP7209A

  ARP Pinion 72 pitch, 9T, 5° angle, 2 mm bore - #ARP7209A

  72 pitch stainless steel 9 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.99 $

• 

  KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677

  KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677

  Pinned 9T 3° angled Black Diamond coated pinions for G7 racing. Coating reduces friction and prevents solder from flowing into teeth. Use with M636 pinion wire.

  11.27 $

• 

  ARP PINION 72 PITCH, 10T, 0° angle, 2 mm bore - #ARP7210

  72 pitch stainless steel 10 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.99 $

• 

  ARP Pinion 72 pitch, 10T, 5° angle, 2 mm bore - #arp7210A

  ARP Pinion 72 pitch, 10T, 5° angle, 2 mm bore - #arp7210A

  72 pitch stainless steel 10 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.99 $

• 

  KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S

  KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S

  Black Diamond coated hardened 11 tooth straight pinion with boss. Coating reduces friction and prevents solder flowing into teeth.

  7.75 $

• 

  KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11

  KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11

  Black Diamond coated hardened 11 tooth 5 degree angled pinion with boss. Coating reduces friction and prevents solder flowing into teeth.

  7.75 $

• 

  ARP PINION 72 PITCH, 11T, 0° angle, 2 mm bore - #ARP7211

  ARP PINION 72 PITCH, 11T, 0° angle, 2 mm bore - #ARP7211

  72 pitch stainless steel 11 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.98 $

• 

  ARP Pinion 72 pitch, 11T, 5° angle, 2 mm bore - #ARP7211A

  ARP Pinion 72 pitch, 11T, 5° angle, 2 mm bore - #ARP7211A

  72 pitch stainless steel 11 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.98 $

• 

  ARP Pinion 72 pitch, 12T, 0° angle, 2 mm bore - #ARP7212

  ARP Pinion 72 pitch, 12T, 0° angle, 2 mm bore - #ARP7212

  72 pitch stainless steel 12 tooth pinion gears heat treated to 36-38 hardness

  7.99 $

• 

  ARP Pinion 72 pitch, 12T, 5° angle, 2 mm bore - #arp7212A

  ARP Pinion 72 pitch, 12T, 5° angle, 2 mm bore - #arp7212A

  72 pitch stainless steel 12 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.99 $

• 

  ARP Pinion 72 pitch, 13T, 0° angle, 2 mm bore - #arp7213s

  ARP Pinion 72 pitch, 13T, 0° angle, 2 mm bore - #arp7213s

  72 pitch stainless steel 13 tooth pinion gears heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 13T, 5° angle, 2 mm bore - #arp7213a

  ARP Pinion 72 pitch, 13T, 5° angle, 2 mm bore - #arp7213a

  72 pitch stainless steel 13 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 14T, 0° angle, 2 mm bore - #arp7214s

  ARP Pinion 72 pitch, 14T, 0° angle, 2 mm bore - #arp7214s

  72 pitch stainless steel 14 tooth pinion gears heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 14T, 5° angle, 2 mm bore - #arp7214a

  ARP Pinion 72 pitch, 14T, 5° angle, 2 mm bore - #arp7214a

  72 pitch stainless steel 14 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 15T, 0° angle, 2 mm bore - #arp7215s

  ARP Pinion 72 pitch, 15T, 0° angle, 2 mm bore - #arp7215s

  72 pitch stainless steel 15 tooth pinion gears heat treated to 36-38 hardness

  7.96 $

• 

  ARP Pinion 72 pitch, 15T, 5° angle, 2 mm bore - #arp7215a

  ARP Pinion 72 pitch, 15T, 5° angle, 2 mm bore - #arp7215a

  72 pitch stainless steel 15 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.96 $

• 

  ATTAN GEAR 72 PITCH 44T, 16° angle, 3/32" axle - #ATT724416

  ATTAN GEAR 72 PITCH 44T, 16° angle, 3/32" axle - #ATT724416

  5.26 $

• 

  CAHOZA GEAR 72 PITCH, 44T, 16° angle, 3/32" axle, Ø16.00 mm - #4

  POLYMER GEARS 72 PITCH ANGLED 16°
  polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories

  5.20 $

• 

  JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D

  JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D

  Old catalog #JK724415

  4.99 $