72 Pitch ZHB
Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov
Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.
-
CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#230
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 72 PITCH 39T, 0° angle, 3/32" axle, Ø14.3 мм, glued on 3/32" Proslot axle - ZHB#223
he hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#229
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K Gear 72 pitch 42 teeth, 0° angle, 3/32" axle, Ø15.46 mm glyed on Proslor axle - #225
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)