72 Pitch Gears (3/32" - 2,36 mm)
-
BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7240332longled
BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7240332longled
Suitable for ES 1/24
-
JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740
JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740
Old catalog #JK7240
-
S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072
S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072
-
S&K Gear 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.58 mm. For gluing. - #SK4072G
S&K Gear 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.58 mm. For gluing. - #SK4072G
-
CAHOZA GEAR 72 PITCH 40T, 0° angle, 3/32" axle, Ø14.85 mm - #5
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24 -
ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle - #ATT7240
ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle, - #ATT7240
-
-
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
-
S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332
-
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled
Suitable for ES 1/24
-
S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172
S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172
-
CAHOZA POLYMER GEAR 72 PITCH, 41T, 0° ANGLE, 3/32" AXLE, Ø15.2 mm - #5
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24 -
S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272
S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272
-
S&K Gear 72 pitch 42 teeth, 0° angle, 3/32" axle, Ø15.46 mm glyed on Proslor axle - #225
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)