SLICK 7
-
SLICK7 Wheel retainer eyelets .032", 1 pack (10 pcs.) - #S7-140
SLICK7 Wheel retainer eyelets .032", 1 pack (10 pcs.) - #S7-140
Small eyelett retainer for holding .032" axle wheels onto axle. Use with S7-143 rubber wheels or S7-345 rubber wheel. Made from thin wall brass for min. weight. Fits over body pin axles.
-
SLICK7 Wheel retainers 1/16" axle, 1 pack (4 pcs.) - #S7-129
SLICK7 Wheel retainers 1/16" axle, 1 pack (4 pcs.) - #S7-129
-
SLICK7 3/32" (2.36 MM), .005" (0.127 MM) THICK, STEEL AXLE SPACERS, 10 pcs. - SL7-21
3/32" (2.36 MM), .005" (0.127 MM) THICK, STEEL AXLE SPACERS, 10 pcs.
-
SLICK7 Gear 48 pitch, 26T, 1/8" axle, Ø14.8 mm - #S7-525-26
SLICK7 Gear 48 pitch, 26T, 1/8" axle, Ø14.8 mm - #S7-525-26
-
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft), insulation diameter .066" (1,67 mm) - #S7-546
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft), insulation diameter .066" (1,67 mm) - #S7-546
Very soft & thin lead wire.
The best chooise for Formula 1/32!
-
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
-
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 3 m (10 ft), insulation diameter .058" (1,47 mm) - S7-553
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 3 m (10 ft), insulation diameter .058" (1,47 mm) - S7-553
Very soft & thin lead wire.
The best chooise for Formula 1/32!
-
SLICK7 OILER BOTTLER CAP - #SL7531
oiler replacement caps - now you can safely lose this cap from the oil bottle!!!:)))))
-
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #S7-96
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796
-
SLICK7 LEAD WIRE 20Ga (section 0,52 mm²), yellow, 35 cm - #S7-213 - 35
GOLDEN SILICON WIRE 35 cm
-
SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610
SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610
-
SLICK7 Be-Cu ARM SPACER .010" (0,254 mm), 10 psc. - SL7611
SL7611 - .010 thick armature spacers made from hard berrilium copper. 10 psc. ber bag.
-
SLICK7 PHENOLIC ARM SPACERS .010" (0,254 mm), 10 psc. - #SL7-108
Phenolic arm. spacer. Phenolic spacer and bearing shield to fit armature shaft snug! O.D. is 3/16" to cover 5 mm motor bearing and is smaller than comm. so as to not interfere with motor brushes!
-
-
-
-
SLICL7 ARMATURE (2 MM) BRONZE SPACER .030" (0.8 MM) THICK, 6 pcs. - #S7-283
ARMATURE SPACER , .030 THICK, MACHINED (NEW THICKNESS)
-
-
SLICK7 3/32" (2.36 mm), .016" (0.4 mm) thick, polymer axle spacers, 10 pcs. - #SL7-111
SLICK7 3/32" (2.36 mm), .016" (0.4 mm) thick, polymer axle spacers, 10 pcs. - #SL7-111
-
SLICK7 Lead sheet thickness .032" (0,8 mm), 50 x 80 mm (1.968" х 3.149") - #S78
SLICK7 Lead sheet thickness .032" (0,8 mm), 50 x 80 mm (1.968" х 3.149") - #S78
-
SLICK7 TEFLON ENDBELL SCREW INSULATORS, 6 pcs. - #SL428
Teflon Insulator spacers for Aluminium Endbells, .050 ID x .110 O.D. x .015 Thick
-
SLICK7 3/32" (2.36 MM), .016" (0.4 MM) THICK, ALUMINIUM AXLE SPACERS, 10 pcs. - #SL7-38
3/32" (2.36 MM), .016" (0.4 MM) THICK, ALUMINIUM AXLE SPACERS, 10 pcs. - #SL7-38
-
SLICK7 Motor storage tube, 1 pc. - #S7-573
SLICK7 Motor storage tube, 1 pc. - #S7-573
New motor storage tubes, can be used to store your motors and, unlike boxes, these make a solid seal to keep out mosture. Use for cobalt to 16D motors, or to store small parts in your box!
-
SLICK7 3/32" (2.36 mm) .025" (0.635 mm) long, steel spacers, 1 cd. (10 pcs.) - #S7-22
SLICK7 3/32" (2.36 mm) .025" (0.635 mm) long, steel spacers, 1 cd. (10 pcs.) - #S7-22
-
SLICK7 .005X.007 WING KIT - #SL7-170
SL7-170 - .005 X .007 WING KIT
-
SLICK7 3/32" X 1/4" (2.36 X 6.15 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair - #SL7-229
REDUCER BUSHING 3/32 AXLE ON 1/8 AXLE CARS
For order 4 pair min.
-
SLICK7 3/32" (2.36 mm) .100" (2.54) long, aluminum spacers, 4 pcs. - #S7-284
SLICK7 3/32" (2.36 mm) .100" (2.54) long, aluminum spacers, 4 pcs.
-
-
SLICK7 REINFORCED STRAPPING TAPE, 12 mm x 22 m - #S7-575
Excellent strapping tape. Takes up little space.
-
Клипсы для проводов в токосъемник из посеребренной меди, длинные, пара - #SL7-209
Клипсы для пайки проводов сверху токосъемника.
-
SLICK7 Adhesive body tape 1/2" - #S7-570
SLICK7 Adhesive body tape 1/2" - #S7-570
Super strong pure adhesive tape for attaching side dams, spoilers, diaplanes or just .010 lexan plastic body re-inforcement.Comes in a HUGE 180foot roll, lasts for ever!just cut and stick on body or on plastic piece, then peel off release paper, and glue onto body for near permanent connection.Used by us for super stick lead, and secret of Pros for the last 20 years!
-
SLICK7 CLEANER-CONDITIONER FOR COMMUTATOR VOODO COMM BRAID DROPS - SL404
VOODOO COMM DROPS AND BRAID ANTI-BURN TREATMENT
-
SLICK7 GLIDEX II OILITES AND BALLBEARINGS OIL -#S7-426
SLICK7 OILITES AND BALLBEARINGS OIL
GLIDEX II Synthetic lubricant for bushings and ball bearings. A must for SL7 bushings.
-
SLICK7 Glidex synth lubricant - #SL7405
SL7405 - GLIDEX SYNTHETIC AEROSPACE LUBRICANT (MIL-SPEC). Ultra -HighFilmstrength , Bonding, low viscosity oil for ball bearing.
-
SLICK7 SILVER SHUNT WIRE, HANK, Silver weaving - #SL7219
SILVER PLATED SHUNT WIRE
Silver weaving
-
-
SLICK7 1/8" X 3/16" (3.15 X 4.76 MM) BUSHINGS IN PRODUCTION CHASSIS, pair - #SL7-244
1/8" X 3/16" (3.15 X 4.76 MM) BUSHINGS IN PRODUCTION CHASSIS, pair
-
SLICK7 3/16" X 1/4" (4.76 X 6.15 MM) REDUCER BUSHING, pair - #SL7-142
REDUCER BUSHING MOUNTS 3/32 BEARINGS ON 1/8
