PROSLOT

• 

  PROSLOT SPEEDFX X12 BALANCED MOTOR, W/CHEAP BALANCED ARMATURE- #PS3000

  Speed FX Group 12 Motor SRS C-Can - Black Endbell

  Great option for the beggining racers in Production 1/24. When the work time of cheap armature came out, you can set in this can more expensive armature.

  42.50 $

• 

  PROSLOT 2x5 MM CAN & ENDBELL OILITES (POWDER BRONZE), 1 pc. - #PSL2015

  FX 2 X 5 Can & Endbell Replacement Oilites 

  0.93 $

• 

  PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly - #PS-714 Pro-SRS

  PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly

  14.95 $

• 

  PROSLOT Gear 64 pitch, 32T, 0° angle, 3/32" axle, Ø13.65 mm, w/screw- #PS-680-32

  PROSLOT Gear 64 pitch, 32T, 0° angle, 3/32" axle, Ø13.65 mm, w/screw- #680-32

  The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub

  6.50 $

• 

  PROSLOT Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø14.05 mm, w/screw- #PS-680-33

  PROSLOT Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø14.05 mm, w/screw- #670-36

  The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub

  6.50 $

• 

  PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw - #PS-680-34

  PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw - #PS-680-34

  The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub

  6.50 $

• 

  PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw, 1 cd. (6 pcs.) - #PS-680-34

  PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw, 1 cd. (6 pcs.) - #PS-680-34

  The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub

  36.00 $

• 

  PROSLOT SMQ (SINGLE MAGNET QUADS) MATCHED MAGNETS FOR C-CANS, pair - #PS906

  SMQ (Single Magnet Quads) Matched Magnets for Proslot motors group 12.

  16.50 $

• 

  PROSLOT MEGA III MATCHED MAGNETS FOR C-CANS (X-12), pair - #PS912

  MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long

  Selected tool magnets for C-cans (group 12 motors)

  23.00 $

• 

  PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP

  PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP

  11.95 $

• 

  PROSLOT SpeedFX S16D BALANCED MOTOR - #PS-2001

  PROSLOT SpeedFX S16D BALANCED MOTOR - #PS-2001

  Universal motor with a wide range of uses and wide possibilities of upgrades.

  It is used, as in the simplest models of "Teapot", and in models of trucks. Depending on the ratio and the installed optional armature, the Production class 1/24 is also suitable.

  26.25 $

• 

  PROSLOT SpeedFX X12 REPLACEMENT BALANCED ARMATURE - #PS3006

  FX X12 Replacement Balanced Armature (commutator trued)

  16.50 $

• 

  PRO SLOT MOTOR SPRINGS- DOUBLE OVERHEAD SpeedFX, 2 coils, pair, - #PSL2013

  Speed Fx Motor springs - Double Overhead 

  1.17 $

• 

  PROSLOT Gear 64 pitch, 35T, 0° angle, 3/32" axle, w/screw - #PS-680-35

  PROSLOT Gear 64 pitch, 35T, 0° angle, 3/32" axle, w/screw - #PS-680-35

  The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub

  6.50 $

• 

  PROSLOT Gear 64 pitch, 35T, 0° angle, 3/32" axle, w/screw, 1 cd. (6 pcs.) - #PS-680-35

  PROSLOT Gear 64 pitch, 35T, 0° angle, 3/32" axle, w/screw, 1 cd. (6 pcs.) - #PS-680-35

  The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub

  36.00 $

• 

  PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38

  Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank

  72.50 $

• 

  PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42

   Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank

  72.50 $

• 

  PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45

   Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank

  72.50 $

• 

  PROSLOT GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw- #680-36

  36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green

  6.50 $

• 

  PROSLOT GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.39 mm, w/screw- #680-37

  37t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green

  6.50 $

• 

  PROSLOT .012" NICKEL LW GUIDE CLIPS, 6 pairs - #625

  12.00 $

• 

  PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans) - #PS711

  PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans)

  7.50 $

• 

  PROSLOT Polymer spur gear 72 pitch, 40T, 0° angle, 3/32" axle, Ø14.7 mm (Ø.579") - #PS-684

  PROSLOT Polymer spur gear 72 pitch, 40T, 0° angle, 3/32" axle, Ø14.7 mm (Ø.579") - #PS-684

  6.00 $

• 

  PROSLOT GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw- #680-38

  38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green

  6.50 $

• 

  PROSLOT EUROSPORT ARMATURES, PARAMETERS UNDER SPECIAL ORDER

  All PARAMETERS under special order

  (Write to us to choose what you need)

  • Wingings
  • Dia.
  • Stack
  • Long (by ballbearings)
  • Advance angle 
  • Arm.shaft: 1,5mm

  
  

  (you can fill this form for made special order)

  Armatures comes after rebalancing (cost 3$).

  81.79 $

• 

  PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B

  PROSLOT Euro MK1 motor blue printed sealed

  Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing

  61.00 $

• 

  PROSLOT C-Can assembled endbell (w/copper hardware) - #PS-618

  PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS-618

  24.95 $

• 

  PROSLOT Agent 99 Bearing Oil - #PS602

  Ball Bearing Oil (Hulk Green)

  5.99 $

• 

  PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S

  PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S

  Magnets only!

  39.95 $

• 

  PROSLOT Magnet Clips for C-cans,1 pc. - #PS640

  PROSLOT Magnet Clips for C-cans, 1 pc.

  This is the clips for all 12-group (C-cans) motors.

  0.30 $

• 

  PROSLOT HARDWARE FOR PROSLOT MOTORS X-12 GROUP, W/SPRING CUPS & SCREWS- #PS642

  Hardware set complete -includes hardware, oilite, spring cups and screws

  12.00 $

• 

  PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641

  Brush Hood & Heat Sink set

  11.00 $

• 

  PROSLOT SpeedFX 16D/S16D SETUP - #PS 2004

  FX 16D/S16D Motor Setup

  17.75 $

• 

  PROSLOT 16D/S16D MOTOR CAN - #PS2005

  Proslot can for 16D motors, w/out magnets

  10.00 $

• 

  PROSLOT SPEED FX S16D BLUEPRINT SETUP, W/MATCHED MAGNETS - #PS 2100

  SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.

  24.50 $

• 

  PROSLOT GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.06 mm, w/screw- #680-39

  38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green

  6.50 $

• 

  PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619

  PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619

  9 Lead Wire with Clips 18 AWG w/441 Ultra fine strands

  5.50 $

• 

  PRO SLOT LEAD WIRE 18Ga (0,82 mm²) with soldered copper clip on both ends, pink, 40 cm - #PSL620

  DRAGSTER LEAD WIRE WITH CLIPS - 40 cm long with nickel plated guide clips

  7.00 $

• 

  PROSLOT Ø3/32" (2.36 mm) DRILL BLANK AXLE, (length 58 mm), 6 pc - #PS-607

  3/32" (2.36 MM) DRILL BLANK AXLE. Axle length is 58 mm

  15.95 $

• 

  PROSLOT Ø3/32" (2.36 mm) DRILL BLANK AXLE, (length 58 mm) - #PS-607

  3/32" (2.36 MM) DRILL BLANK AXLE. Axle length is 58 mm

  3.20 $

• 

  PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 1 m (3 ft) - #PS-621

  DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips

  7.00 $

• 

  PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 3 m (10 ft) - #PS-622

  DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips

  19.95 $

• 

  PROSLOT 16D/S16D REPLACEMENT POLYMER ENDBELL - #PS 2008

  16D/S16D REPLACEMENT POLYMER ENDBELL

  5.75 $

• 

  PROSLOT SpeedFX matched magnets for D-cans (16D) - #PS2016

  SPEEDFX MATCHED MAGNETS FOR D-CANS (16D) (1 pr.)

  12.00 $

• 

  PROSLOT ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods - #2009

  SET OF ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods

  12.00 $

• 

  PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010

  PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010

  7.50 $

• 

  PROSLOT TORX 5 SCREW FOR ENDBELLS & BRUSH HOODS, 1 pc. - #PS717

  1 self starting T5 Torx can and endbell screws

  0.30 $

• 

  PROSLOT S16D BALANCED ARMATURE (commutator trued) - #PS 2006

  Basic armature for PROSLOT SPEED FX motor.

  19.50 $

• 

  PROSLOT S16D ARMATURE, BALANCED, DIA. .513" - #PS 700

  Special order!

  Write to us to select the angle of the armature!

  48.50 $

• 

  PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 38 DEGREE - #PS-700C-38

  Super 16 C Arm .513, 38 degrees, balanced

  48.50 $

• 

  PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 42 DEGREE - #PS-700C-42

  Super 16 C Arm .513, 42 degrees, balanced

  48.50 $

• 

  PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 45DEGREE - #PS-700C-45

  Special order!

  Super 16 C Arm .513, 45degrees, balanced

  48.50 $

• 

  PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 38 DEGREE - #PS-700C-KS38

  Special order!

  Write to us to select the angle of the armature or ask, which angle is available in stock!

  48.50 $

• 

  PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 45 DEGREE - #PS-700C-KS45

  Special order!

  Write to us to select the angle of the armature or ask, which angle is available in stock!

  48.50 $

• 

  PROSLOT GEAR 48 PITCH, 26-32T, 1/8" axle, w/screw, special order - #PS-672

  PROSLOT GEAR 48 PITCH, 26-32T, 1/8" axle, w/screw, special order - #PS-672

  Polymer Gears 48 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 26T-pink, 27T-while, 28T-yellow, 29T-violet, 30T-green, 31T-blue, 32T-brown

  Special order from 1pc.

  3.25 $

• 

  PROSLOT Polymer Gear 64 pitch, 40T, 0° angle, 3/32" axle, Ø16.5 mm - #PS-680-40

  PROSLOT Polymer Gear 64 pitch, 40T, 0° angle, 3/32" axle, Ø16.5 mm - #PS-691

  All of their gears were designed with AutoCAD for less friction with an integrated hub that eliminates spinning

  6.50 $

• 

  PROSLOT Gear 64 pitch, 56T, 0° angle, 3/32" axle, w/screw- #PS-680-56

  PROSLOT Gear 64 pitch, 56T, 0° angle, 3/32" axle, w/screw- #PS-680-56

  Light weight Drag Spur Gear 56T Polymer

  6.50 $

• 

  PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724

  PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724

   Armature Spacer Kit - Includes 2 phenolic and 8 brass motor spacers

  3.50 $

You viewed: