PROSLOT
-
PROSLOT SPEEDFX X12 BALANCED MOTOR, W/CHEAP BALANCED ARMATURE- #PS3000
Speed FX Group 12 Motor SRS C-Can - Black Endbell
Great option for the beggining racers in Production 1/24. When the work time of cheap armature came out, you can set in this can more expensive armature.
-
PROSLOT 2x5 MM CAN & ENDBELL OILITES (POWDER BRONZE), 1 pc. - #PSL2015
FX 2 X 5 Can & Endbell Replacement Oilites
-
PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly - #PS-714 Pro-SRS
PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly
-
PROSLOT Gear 64 pitch, 32T, 0° angle, 3/32" axle, Ø13.65 mm, w/screw- #PS-680-32
PROSLOT Gear 64 pitch, 32T, 0° angle, 3/32" axle, Ø13.65 mm, w/screw- #680-32
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
PROSLOT Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø14.05 mm, w/screw- #PS-680-33
PROSLOT Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø14.05 mm, w/screw- #670-36
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw - #PS-680-34
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw - #PS-680-34
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw, 1 cd. (6 pcs.) - #PS-680-34
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw, 1 cd. (6 pcs.) - #PS-680-34
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
PROSLOT SMQ (SINGLE MAGNET QUADS) MATCHED MAGNETS FOR C-CANS, pair - #PS906
SMQ (Single Magnet Quads) Matched Magnets for Proslot motors group 12.
-
PROSLOT MEGA III MATCHED MAGNETS FOR C-CANS (X-12), pair - #PS912
MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long
Selected tool magnets for C-cans (group 12 motors)
-
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
-
PROSLOT SpeedFX X12 REPLACEMENT BALANCED ARMATURE - #PS3006
FX X12 Replacement Balanced Armature (commutator trued)
-
PRO SLOT MOTOR SPRINGS- DOUBLE OVERHEAD SpeedFX, 2 coils, pair, - #PSL2013
Speed Fx Motor springs - Double Overhead
-
PROSLOT Gear 64 pitch, 35T, 0° angle, 3/32" axle, w/screw - #PS-680-35
PROSLOT Gear 64 pitch, 35T, 0° angle, 3/32" axle, w/screw - #PS-680-35
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
PROSLOT Gear 64 pitch, 35T, 0° angle, 3/32" axle, w/screw, 1 cd. (6 pcs.) - #PS-680-35
PROSLOT Gear 64 pitch, 35T, 0° angle, 3/32" axle, w/screw, 1 cd. (6 pcs.) - #PS-680-35
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38
Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42
Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45
Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw- #680-36
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
PROSLOT GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.39 mm, w/screw- #680-37
37t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
-
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans) - #PS711
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans)
-
PROSLOT GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw- #680-38
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
PROSLOT EUROSPORT ARMATURES, PARAMETERS UNDER SPECIAL ORDER
All PARAMETERS under special order
(Write to us to choose what you need)
- Wingings
- Dia.
- Stack
- Long (by ballbearings)
- Advance angle
- Arm.shaft: 1,5mm
(you can fill this form for made special order)
Armatures comes after rebalancing (cost 3$).
-
PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B
PROSLOT Euro MK1 motor blue printed sealed
Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing
-
PROSLOT C-Can assembled endbell (w/copper hardware) - #PS-618
PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS-618
-
PROSLOT Agent 99 Bearing Oil - #PS602
Ball Bearing Oil (Hulk Green)
-
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
Magnets only!
-
PROSLOT Magnet Clips for C-cans,1 pc. - #PS640
PROSLOT Magnet Clips for C-cans, 1 pc.
This is the clips for all 12-group (C-cans) motors.
-
PROSLOT HARDWARE FOR PROSLOT MOTORS X-12 GROUP, W/SPRING CUPS & SCREWS- #PS642
Hardware set complete -includes hardware, oilite, spring cups and screws
-
PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641
Brush Hood & Heat Sink set
-
PROSLOT SpeedFX 16D/S16D SETUP - #PS 2004
FX 16D/S16D Motor Setup
-
PROSLOT 16D/S16D MOTOR CAN - #PS2005
Proslot can for 16D motors, w/out magnets
-
PROSLOT SPEED FX S16D BLUEPRINT SETUP, W/MATCHED MAGNETS - #PS 2100
SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.
-
PROSLOT GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.06 mm, w/screw- #680-39
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619
PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619
9 Lead Wire with Clips 18 AWG w/441 Ultra fine strands
-
PRO SLOT LEAD WIRE 18Ga (0,82 mm²) with soldered copper clip on both ends, pink, 40 cm - #PSL620
DRAGSTER LEAD WIRE WITH CLIPS - 40 cm long with nickel plated guide clips
-
PROSLOT Ø3/32" (2.36 mm) DRILL BLANK AXLE, (length 58 mm), 6 pc - #PS-607
3/32" (2.36 MM) DRILL BLANK AXLE. Axle length is 58 mm
-
PROSLOT Ø3/32" (2.36 mm) DRILL BLANK AXLE, (length 58 mm) - #PS-607
3/32" (2.36 MM) DRILL BLANK AXLE. Axle length is 58 mm
-
PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 3 m (10 ft) - #PS-622
DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips
-
PROSLOT 16D/S16D REPLACEMENT POLYMER ENDBELL - #PS 2008
16D/S16D REPLACEMENT POLYMER ENDBELL
-
PROSLOT SpeedFX matched magnets for D-cans (16D) - #PS2016
SPEEDFX MATCHED MAGNETS FOR D-CANS (16D) (1 pr.)
-
PROSLOT ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods - #2009
SET OF ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods
-
PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010
PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010
-
PROSLOT TORX 5 SCREW FOR ENDBELLS & BRUSH HOODS, 1 pc. - #PS717
1 self starting T5 Torx can and endbell screws
-
PROSLOT S16D BALANCED ARMATURE (commutator trued) - #PS 2006
Basic armature for PROSLOT SPEED FX motor.
-
PROSLOT S16D ARMATURE, BALANCED, DIA. .513" - #PS 700
Special order!
Write to us to select the angle of the armature!
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 38 DEGREE - #PS-700C-38
Super 16 C Arm .513, 38 degrees, balanced
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 42 DEGREE - #PS-700C-42
Super 16 C Arm .513, 42 degrees, balanced
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 45DEGREE - #PS-700C-45
Special order!
Super 16 C Arm .513, 45degrees, balanced
-
PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 38 DEGREE - #PS-700C-KS38
Special order!
Write to us to select the angle of the armature or ask, which angle is available in stock!
-
PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 45 DEGREE - #PS-700C-KS45
Special order!
Write to us to select the angle of the armature or ask, which angle is available in stock!
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "HK" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "RUS" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
PROSLOT GEAR 48 PITCH, 26-32T, 1/8" axle, w/screw, special order - #PS-672
PROSLOT GEAR 48 PITCH, 26-32T, 1/8" axle, w/screw, special order - #PS-672
Polymer Gears 48 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 26T-pink, 27T-while, 28T-yellow, 29T-violet, 30T-green, 31T-blue, 32T-brown
Special order from 1pc.
-
PROSLOT Polymer Gear 64 pitch, 40T, 0° angle, 3/32" axle, Ø16.5 mm - #PS-680-40
PROSLOT Polymer Gear 64 pitch, 40T, 0° angle, 3/32" axle, Ø16.5 mm - #PS-691
All of their gears were designed with AutoCAD for less friction with an integrated hub that eliminates spinning
-
PROSLOT Gear 64 pitch, 56T, 0° angle, 3/32" axle, w/screw- #PS-680-56
PROSLOT Gear 64 pitch, 56T, 0° angle, 3/32" axle, w/screw- #PS-680-56
Light weight Drag Spur Gear 56T Polymer
-
PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724
PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724
Armature Spacer Kit - Includes 2 phenolic and 8 brass motor spacers
