JK Products
-
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
Old catalog #JK303065
-
JK Clear body 4" Audi RSC 99, Lexan .005" (0,125 mm) - #B86X
JK Clear body 4" Audi RSC 99 - #B86X
- Made from: Polycarbonate (Lexan)
- For: 4"
- Thickness: .005" (0.125 mm)
- Clear body
Old catalog #JK7182
-
JK Tire rack - #L32
JK Tire rack - #L32
Wheel stand is for holding any kind of tires.
-
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21 -
4” Cheetah 21 Stainless Steel Chassis Kit .035” thick with screw in Falcon motor brace
Old catalog #JK25021
-
JK STIFFER BRAID, (sizes: 0,8 x 4,8 x 27,5 mm), pair - #U11
JK STIFFER BRAID, pair - #U11
Stiffer braid for guide, pair
Sizes: 0,8 x 4,8 x 27,5 mm (.0315" x .189" x 1.083")
Old catalog #JK35212
-
JK SOFT BRAID, (sizes: 0,9 x 4,85 x 32 mm), pair - #U10
JK SOFT BRAID, pair - #U10
Soft braid for guide, pair
Sizes: 0,9 x 4,85 x 32 mm (.035" x .191" x 1.26")
Old catalog #JK3521
-
JK Gear 64 pitch, 35T, 0° angle, 2 mm axle, Ø14.53 mm, w/screw- #G635m
JK Gear 64 pitch, 35T, 0° angle, 2 mm axle, Ø14.53 mm, w/screw- #G635m
Old catalog #JK42352
-
JK Gear 64 pitch, 37T, 0° angle, 2 mm axle, Ø15.35 mm, w/screw- #G637m
JK Gear 64 pitch, 37T, 0° angle, 2 mm axle, Ø15.35 mm, w/screw- #G637m
Old catalog #JK42372
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 6 pc. - #C40B-6
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
Old catalog #JK8051
-
JK Screw 4/40" hollow in rims & gears, 0.050" hex, 1 pc. - #U62
JK Screw 4/40" hollow in rims & gears, 0.050" hex, 1 pc. - #U62
-
JK Donut wizard mounting tool - #L19
JK Donut wizard mounting tool - #L19
Makes fitting of donuts easy.
Suitable for all 3/32" axle hubs / rims.
The wizard comes with 5 cones to suit most wheel sizes 8mm to 15mm
Manufactured from strong sturdy Nylon & Delrin with a hard steel 3/32" axleOld catalog #JK8075
-
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10
-
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100
-
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
Old catalog #JK55012
-
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
Old catalog #C43
-
JK Hawk Premium Motor Brushes M3 & M6, 6 pair - #M36H-6
JK Hawk Premium Motor Brushes M3 & M6, 6 pair - #M36H-6
Old catalog #JK303065
-
JK Hawk 6 Motor, *** Balanced *** - #M6
JK Hawk 6 Motor, *** Balanced *** - #M6
Old catalog #JK30306
-
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
PARAMETERS
- Inside dia., in (mm): .375 (9,52)
- Outside dia., in (mm): .850 (21,6)
-
JK Precision machined 6 hole guide nut, PRO-version, 1 pc. Use with the JK#L30 guide nut tool - #U61
JK Precision machined 6 hole guide nut, PRO-version. Use with the JK#L30 guide nut tool - #U61
-
JK Precision machined 6 hole guide nut, PRO-version, 6 pc. Use with the JK#L30 guide nut tool. - #U61-6
JK Precision machined 6 hole guide nut, PRO-version. Use with the JK#L30 guide nut tool - #U61
-
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick. - #C26T
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick.
0.039" Front 0.047" Rear
Old catalog #C43
-
JK 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #U26-1
JK bushings in production chassis, pair
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm).
- Old catalog #JK5574
-
JK 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, 1 cd. (6 pairs) - #U26
JK bushings in production chassis, 1 cd. (6 pairs)
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm).
- Old catalog #JK5574
-
JK 4" cheetah Aeolos center section - #C26C
JK 4" cheetah Aeolos center section - #C26C
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
Old catalog #JK30307
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
Old catalog #JK30307BB
-
JK Body Guide Cutting Tool - #L80
JK Body Guide Cutting Tool - #L80
Professional tool for easy & smooth cutting of the body
-
JK 4" cheetah Aeolos 1 piece pan 0.040" thick - #C26PT
JK 4" cheetah Aeolos 1 piece pan 0.040" thick - #C26PT
-
JK Gear 64 pitch, 32T, 0° angle, 3/32" axle - #G632
JK Gear 64 pitch, 32T, 0° angle, 3/32" axle - #G632
Old catalog #JKG632
-
JK Gear 64 pitch, 32T, 0° angle, 3/32" axle, 1 cd. (6 pcs.) - #G632-6
JK Gear 64 pitch, 32T, 0° angle, 3/32" axle, 1 cd. (6 pcs.) - #G632-6
Old catalog #JKG632-6
-
JK Gear 64 pitch, 33T, 0° angle, 3/32" axle - #G633
JK Gear 64 pitch, 33T, 0° angle, 3/32" axle - #G633
Old catalog #JKG633
-
JK Gear 64 pitch, 33T, 0° angle, 3/32" axle, 1 cd. (6 pcs.) - #G633-6
JK Gear 64 pitch, 33T, 0° angle, 3/32" axle, 1 cd. (6 pcs.) - #G633-6
Old catalog #JKG633-6
-
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm - #G634
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm - #G634
Old catalog #JK42341
-
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm, narrow - #G634N
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm, narrow - #G634N
Old catalog #JK4234F
-
JK PINION GEAR 48 PITCH, 7T , 2 mm bore, STEEL - #P47S
JK PINION GEAR 48 PITCH, 7T , 2 mm bore, STEEL - #P47S
48 pitch 7 tooth solder on pinion
Old catalog #JK4207
-
JK BRASS PIN TUBING, lenght 10.8 mm, 4 psc. - #U50
JK BRASS PIN TUBING, length 10.8 mm, 4 psc. - #U50
Old catalog #JKP9171
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
JK Hawk 11 extreme performance drag motor - #M11
Hawk 11 Precision Balanced Extreme Performance Motor, FK Sized, recommended for drag use only.
-
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
-
JK Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
JKP Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
A close analogue of the motor FALCON 4, which had been removed from manufacturing.
In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.
Old catalog #JK303025
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
-
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor, copper brush tab for better conductivity, Same wind and performance as Falcon 7
Old catalog #JKHR
-
JK Hawk 4 Motor, *** COMPUTER BALANCED *** - #M4
JK Hawk 4 Motor, *** COMPUTER BALANCED *** - #M4
Introducing our newest motor, the Hawk™ MB (yes, a Hawk mini-brute).
We received requests from raceways and racers to make a replacement motor so we did. We tried to match the performance as close to the mini-brute as possible and our pre-release testing showed it to be extremely close
Old catalog #JKHMB
-
JK Motor springs M3 & M6 (L&R), 2 coils - #M36G
JK Motor springs M3 & M6 (L&R), 2 coils - #M36G
Old catalog #JK303066
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
Old catalog #JK42351
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N
Old catalog #JK4235F
-
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
Precision Tolerance Allen Tip, Fits L10 and L15 handles
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw - #G636
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw - #G636
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK42361
-
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
Old catalog #JK80421
-
JK Guide Shoe Nut 9mm socket, Aluminum - #U8
JK Guide Shoe Nut 9mm socket, Aluminum - #U8
Old catalog #JK3516
-
JK CONTROLLER TRIGGER - #N9
JK CONTROLLER TRIGGER - #N9
Controller trigger, Updated
Old catalog #JK8083
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.400" (10.15 mm) - #R3S
JKP Plastic rims #R3S
- For 3/32" axle;
- Width 20 mm;
- Dia. .400" (10.15 mm).
Old catalog #JKR021
-
JK PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø10.2 mm - #JKR021-I
PARAMETERS
- axle: 3/32" (2,36 mm)
- width, mm: 20
- dia.,mm: 10,2
-
JK PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø10,2 mm - #R2S
JK PLASTIC RIMS #R2S
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 10,2
Old catalog #JKR021-2A
-
JK Stock car numbers, orange - #S6
JK Stock car numbers, orange - #S6
Old catalog #JK20031O
-
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
Old catalog #JK4126
-
JK PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #P48S
JK PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #P48S
48 pitch 8 tooth solder on pinion
Old catalog #JK4208
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw, narrow - #G636N
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw, narrow - #G636N
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4236F
-
JK Stock car numbers, red - #S7
JK Stock car numbers, red - #S7
Old catalog #JK20031R
-
JK Precision guide nut wrench for JK#U61 nut - #L30
JK Precision guide nut wrench for JK#U61 nut - #L30
-
JK Ø3/32" (2.36 mm) rear axle, length 2.175" (55 mm) - #A1
JK Ø3/32" (2.36 mm) rear axle, length 2.175" (55 mm) - #A1
Solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing
Old catalog #JK5501
-
JK BRASS GUIDE CLIPS, short, pair - #U16
JK BRASS GUIDE CLIPS, short, pair - #U16
PRE BENT BRASS GUIDE CLIPS WITH SHORT TOP PLATE FOR SOLDERING LEAD WIRE IN THE SLOT OF THE GUIDE
The most available guide clips. Made from brass thickness 0,3 mm.
Old catalog #JK3546
-
JK BRASS GUIDE CLIPS, long, pair - #U15
JK BRASS GUIDE CLIPS, long, pair - #U15
The most available guide clips. Made from brass thickness 0,3 mm.
Old catalog #JK3542
-
JK 4" Cheetah Aeolos 1 piece pan - #C26P
JK 4" Cheetah Aeolos 1 piece pan - #C26P
-
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
4" Cheetah X25 Stainless Steel Chassis Kit 0.9mm thick. Features: Radial pressing guide plate, holes for either 1/2" or 5/8" fronts, shorter in length than the X24 chassis and slightly thicker in the rear pillar block than the X24.
Old catalog #JKX25
-
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
.9mm thick replacement center section for the JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25C
-
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
0.9mm replacement pans for 4" X25 chassis JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25P
-
JK 4" Cheetah aeolos aluminum pan - #C26PA
JK 4" Cheetah aeolos aluminum pan - #C26PA
Old catalog #C43PA
-
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
Part number is JKC26J and the price is $4.95 for a pack of 6 bars: 0.031" = 0.8mm 0.035" = 0.9mm (stock front) 0.039" = 1.0mm 0.043" = 1.1mm.
Old catalog #C43J
-
JK .050" Allen wrench w/guide nut tool 9 mm, blue - #L15
JK .050" Allen wrench w/guide nut tool 9 mm, blue - #L15
Wrench _ Tire & Gear Wrench w 9mm Guide Tool, 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Tip
-
JK CLEAR LEXAN CONTROLLER HANDLE (pair) - #N8
JK CLEAR LEXAN CONTROLLER HANDLE (pair) - #N8
Controller Handle - This is a replacement for the Red Fox controller handle
Old catalog #JK8080
-
JK Gear 48 pitch, 26T, 1/8" axle, Ø14.76 mm, w/screw - #G426
JK Gear 48 pitch, 26T, 1/8" axle, Ø14.76 mm, w/screw - #G426
Old catalog #JK4126
-
JK GEAR 48 PITCH, 27T, 1/8" axle with hub adaptor 3/32", Ø15.2 mm, w/screw - #G427
JK GEAR 48 PITCH, 27T, 1/8" axle with hub adaptor 3/32", Ø15.2 mm, w/screw - #G427
Old catalog #JK4127
-
JK GEAR 48 PITCH, 27T, 1/8" axle, Ø15.2 mm, w/screw - #G427
JK GEAR 48 PITCH, 27T, 1/8" axle, Ø15.2 mm, w/screw - #G427
Old catalog #JK4127
-
JK GEAR 48 PITCH, 28T, 1/8" axle, Ø15.8 mm, w/screw - #G428
JK GEAR 48 PITCH, 28T, 1/8" axle, Ø15.8 mm, w/screw - #G428
Old catalog #JK4128
-
JK GEAR 48 PITCH, 28T, 1/8" axle with hub adaptor 3/32", Ø15.8 mm, w/screw - #G428
JK GEAR 48 PITCH, 28T, 1/8" axle with hub adaptor 3/32", Ø15.8 mm, w/screw - #G428
Old catalog #JK4128
-
JK 5/8"D 1/16"A Front Wheel Plastic, O-ring, 5 Spoke (pr) - #T125O
JK 5/8"D 1/16"A Front Wheel Plastic, O-ring, 5 Spoke (pr) - #T125O
Old catalog #JK8724
-
JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw- #G637
JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw- #G637
37t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK42371
-
JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740
JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740
Old catalog #JK7240
-
JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw, narrow - #G637N
JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw, narrow - #G637N
37t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4237F
-
JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m
JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m
Old catalog #JK72402
-
JK SPUR GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,28 mm, w/screw - #G843
JK SPUR GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,28 mm, w/screw - #G843
Old catalog #JK4343
-
JK POLYMER GEAR 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm, w/screw - #G844m
JK POLYMER GEAR 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm, w/screw - #G844m
Old catalog #JK43442
-
JK GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw- #G638
JK GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw- #G638
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
JK GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw, narrow - #G638N
JK GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw, narrow - #G638N
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4238F
-
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips - #U68SC
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips - #U68SC
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight, w Soldered On Clips
-
JK Phillips Screwdriver for JK#M3 & JK#M6 Motors - #L9
JK Phillips Screwdriver for JK#M3 & JK#M6 Motors - #L9
Old catalog #JK8039
-
JK Floating body mount set, set of 4. (1 set) - #U63
JK Floating body mount set, set of 4. (1 set) - #U63
-
JK 3/32" (2.36 mm), .022" (0.56 mm) THICK, STEEL AXLE SPACERS, 10 pcs. - #U54-10
JK 3/32" (2.36 mm), .022" (0.56 mm) THICK, STEEL AXLE SPACERS, 10 pcs. - #U54-10
Old catalog #JK178
-
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips 30 sm (12,5") - #U68DSC
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips 30 sm (12,5") - #U68DSC
Drag Lead Wire 20AWG High Purity, High Current Copper, with Soldered On Clips 12.5"
-
JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10
JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (10 ft)
-
JK Lead wire 20Ga (section 0,52 mm²), purple, 15.2 m (50 ft) - #U68-50
JK Lead wire 20Ga (section 0,52 mm²), purple, 15.2 m (50 ft) - #U68-50
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (50 ft)
-
JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S
JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S
48 pitch 9 tooth solder on pinion
Old catalog #JK4209
-
JK GM SUPER TRUCK-TATRA BODY, Lexan, thickness .01" (0.25 mm) - #B140B
GM 1/24 SUPER TRUCK-TATRA Body - #B140B
- Made from: Polycarbonate (Lexan)
- For: GM (Truck)
- Thickness: .01" (0.25 mm)
Old catalog #JK7402B
-
JK GM SUPER TRUCK-Caterpillar body, Lexan, thickness .01" (0.25 mm) - #B141B
GM SUPER TRUCK-Caterpillar body
- Made from: Polycarbonate (Lexan)
- For: GM (Truck)
- Thickness: .01" (0.25 mm)
Old catalog #JK7403B
-
JK Controller Frame, Anodized Aluminum Black - #N20
JK Controller Frame, Anodized Aluminum Black - #N20
Old catalog #JK80812
-
JK AXLE Ballbearing 3/16" х 3/32" (4.76 х 2.36 mm) flanged shielded, 5 balls, pair - #U70
JK AXLE Ballbearing 3/16" х 3/32" (4.76 х 2.36 mm) flanged shielded, 5 balls, pair - #U70
-
JK CONTROLLER HANDLE BOLT SET - #JK80819
JK CONTROLLER HANDLE BOLT SET - #JK80819
Set of Controller handle screws
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.433" (11 mm) - #R3I
JK Plastic rims - #R3I
- For 3/32" axle;
- Width 20 mm;
- Dia. .433" (11 mm).
-
JK Stainless steel motor screw, Hawk, allen head, 1.5mm, 1 pc. - #M55
JK Stainless steel motor screw, Hawk, allen head, 1.5mm, 1 pc. - #M55
Old catalog #JK3019
-
JK Motor Screw 6mm 0.050" Allan Head Black, 1 pc. - #M52
JK Motor Screw 6mm 0.050" Allan Head Black, 1 pc. - #M52
Old catalog #JKS03
-
JK GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm, w/screw - #G844
JK GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm, w/screw - #G844
Old catalog #JK4344
-
JK Pinion gear puller T-Handle - #L17
JK Pinion gear puller T-Handle - #L17
Old catalog #JK8063
-
JK Heavy Duty Pinion Gear Puller - #L23
JK Heavy Duty Pinion Gear Puller - #L23
DELUXE GEAR PULLER has tighter pin and is harder than the previous version. Made from tool steel.
Old catalog #JK8062
-
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30301
-
-
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30303AL
-
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
JK Motor Screw 6mm 0.050" Allan Head Black, 6 pcs. - #M52
JK Motor Screw 6mm 0.050" Allan Head Black, 6 pcs. - #M52
Old catalog #JKS03
-
JK Self tapping motor screw 5/64"/ 2 mm long, allen head, black, 1 pc. - #M53
JK Self tapping motor screw 5/64"/ 2 mm long, allen head, black, 1 pc. - #M53
Old catalog #JKS2016B
-
JK Front wheels for F1/32, 0.750"D 0.530"H 0.225"W 3/32"Axle (Ø18,8 mm, rimSz 13,46 mm, width 5,7 mm, axle 2,36 mm), pair - #T110F
JK Front wheels for F1/32, pair - #T110F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.225" (5,7 mm)
- Dia.: 0.750" (18,8 mm)
- Rims material: plastic
- For classes: F1/32 (JKP F 1/32 "CHEETAH 11 CHASSIS KIT" or "B.S.V KIT for assembly F1/32) & for FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK8746PF
-
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, 1 pc. - #P610N
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, 1 pc. - #P610N
This is press-on style pinion gear
Old catalog #JK440010S
-
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow (6 ea) - #P610N-6
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow (6 ea) - #P610N-6
This is press-on style pinion gear
Old catalog #JK440010S
-
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P610
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P610
This is press-on style pinion gear
Old catalog #JK440010
-
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P610-6
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P610-6
This is press-on style pinion gear
Old catalog #JK440010
-
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P610S
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P610S
Old catalog #JK450010
-
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P610S-6
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P610S-6
Old catalog #JK450010
-
JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw - #G743D
JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw - #G743D
Old catalog #JK724315
-
JK Brass machined guide nuts 9,5 mm socket - #U7
JK Brass machined guide nuts 9,5 mm socket
Old catalog #JK35151
-
JK Duralumin guide nut 9,5 mm socket - #U5
Duralumin Guide Nuts – Lightweight custom machined 9,5 mm socket
Old catalog #JK3515
-
JK Self-tapping end bell screw, phillips head, 1 pc. - #M51
JK Self-tapping end bell screw, phillips head, 1 pc. - #M51
Old catalog #JKS02
-
JK 1/32 Direct Drive Chassis Kit - #C10
JK 1/32 Direct Drive Chassis Kit - #C10
Old catalog #JK32DD
-
JK 4" Cheetah F1/Indy chassis kit, narrow - #C30
JK 4" Cheetah F1/Indy chassis kit, narrow - #C30
Old catalog #JK251171
-
JK 4" Cheetah F1/Indy chassis kit, wide - #C35
JK 4" Cheetah F1/Indy chassis kit, wide
Old catalog #JK251172
-
JK Ø3/32" (2.36 mm) rear axle, length 2.580" (65 mm) - #A2
JK Ø3/32" (2.36 mm) rear axle, length 2.580" (65 mm) - #A2
Solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing
Old catalog #JK5502
-
JK Ø3/32" (2.36 mm) rear axle, length 2.950" (75 mm), Precision Ground True Drill Blank Axle, High Hardness - #A3
JK Ø3/32" (2.36 mm) rear axle, length 2.950" (75 mm), Precision Ground True Drill Blank Axle, High Hardness - #A3
Old catalog #JK5507DB
-
JK Lead wire 18Ga (section 0,82 mm²), transparent, 1 m (3 ft) - #U52-3
UberFlex Lead Wire 18 AWG - 444 strand high purity copper silicone jacket 3 ft
-
JK 3/32" X 1/4" (2.36 X 6.15 mm) Axle Precision Machined Adjustable Bushings in Production chassis, pair - #U23
JK 3/32" X 1/4" (2.36 X 6.15 mm) Axle Precision Machined Adjustable Bushings in Production chassis, pair - #U23
Old catalog #JK55711
-
JK Pinion 64 pitch, 11T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P611
JK Pinion 64 pitch, 11T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P611
This is press-on style pinion gear
Old catalog #JK440011
-
JK Pinion 64 pitch, 11T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P611-6
JK Pinion 64 pitch, 11T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea)
This is press-on style pinion gear
Old catalog #JK440011
-
JK Wiper arm with wiper button - #N4
JK Wiper arm with wiper button
Old catalog #JK80814
-
JK Lane Stickers (8 sheets) - #S1-8
JK Lane Stickers (8 sheets) - #S1-8
LANE STICKERS - 8SHEETS W/LANE# AND CHANGE INFO
Old catalog #JK150
-
JK Lane Stickers, (200 Sheets) - #S1-200
JK Lane Stickers, (200 Sheets) - #S1-200
LANE STICKERS - 200SHEETS W/LANE# AND CHANGE INFO
Old catalog #JK150B
-
JK GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, w/screw - #G845
JK GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, w/screw - #G845
Old catalog #JK4345
-
JK Front wheels for F1/32, 0.680"D 0.530"H 0.250"W 3/32"Axle (Ø17,27 mm, rimSz 13,46 mm, width 6,35 mm, axle 2,36 mm), pair - #T109F
JK Front wheels for F1/32, pair - #T109F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.250" (6,35 mm)
- Dia.: 0.680" (17,27 mm)
- Rims material: plastic
- For classes: F1/32 (JKP F 1/32 "CHEETAH 11 CHASSIS KIT" or "B.S.V KIT for assembly F1/32) & for FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK87461PF
-
JK Ø1/8" (3.15 mm) axle, length 2.175" (55 mm) - #A4
JK Ø1/8" (3.15 mm) axle, length 2.175" (50,8 mm) - #A4
1/8" x 2.175" Precision Ground True Drill Blank Axle, High Hardnes
Old catalog #JK5511
-
JK Ø1/8" (3.15 mm) axle, length 2.175" (55 mm), 6 pcs. - #A4-6
JK Ø1/8" (3.15 mm) axle, length 2.175" (50,8 mm), 6 pcs. - #A4-6
1/8" x 2.175" Precision Ground True Drill Blank Axle, High Hardnes
Old catalog #JK5511
-
JK Armature for HAWK #M3 motor - #M3A
JK Armature for HAWK #M3 motor - #M3A
Basic HAWK motor armature. It can be used in Proslot EURO MK motors
Old catalog #JK30302
-
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P611S
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P611S
Old catalog #JK450011
-
JK Tube - front tire w/cap, small < 0.80" dia. tires (20,3 mm.) - #U56
JK Tube - front tire w/cap, small - #U56
- Height: 1,57" (40 mm);
- Dia.: 0.9" (23 mm);
- Dia. tires: < 0.80" (20,3 mm.)
-
JK Tube - thin w/cap < 0.80" dia. tires (20,32 mm.) - #U59
JK Tube - thin w/cap - #U59
- Height: 2.188" (55,58 mm);
- Dia.: .915" (23,25 mm);
- Dia. tires: < 0.8" (20,32 mm.)
-
JK Tube - regular w/cap < 0.96" dia. tires (24,4 mm.) - #U58
JK Tube - regular w/cap - #U58
- Height: 2.20" (56,05 mm);
- Dia.: 1.07" (27,26 mm);
- Dia. tires: < 0.96" (24,4 mm.)
-
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), blue - #L10
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), blue
The necessary thing for any racers!!
Hudy style aluminum handle with .050 allen tip and 3/8" nut driver guide tool
Old catalog #JK8042
-
JK Tube - large w/cap < 1.10" dia. tires (28 mm.) - #U57
JK Tube - large w/cap - #U57
- Height: 2.79" (71,4 mm);
- Dia.: 1.22" (31,24 mm);
- Dia. tires: < 1.10" (28 mm.)
-
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), 4.5" long reach 2mm shaft, blue - #L70
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), 4.5" long reach 2mm shaft, blue - #L70
Tire & Gear Wrench w 3/8" Guide Tool, 4.5" long reach 2mm Shaft, 0.050" Precision Tolerance Tip HRC Hardened
-
JK 1/32 F1 cheetah 11 chassis kit - #C62
JK 1/32 F1 cheetah 11 chassis kit
A beautiful alternative for club races
Designed for HAWK motor, but it is possible to install any motor that falls under the arm :)
Old catalog #JK25141
-
JK Custom Painted Body 4" Lola B12 LMP Martini 0.010" - #B114BU7
JKP Custom Painted Body 4" Lola B12 LMP Martini 0.010"
-
JK MODEL WHEELS 3/32" AXLE, 15.3MM WIDTH, ON PLASTIC RIMS, for F1/32, pair - #T201N
JK MODEL WHEELS 3/32" AXLE, 15.3MM WIDTH, ON PLASTIC RIMS, for F1/32, pair - #T201N
0.720"D 0.400"H 0.600"W 3/32"A Natural 1/32
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- For classes: F1/32
Old catalog #JK8721SP
-
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø10.5 mm, with offset hub for ES32, pair - #T205N
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø10.5 mm, with offset hub for ES32, pair - #T205N
1/32 Scale Reverse Hub Small Rim Tires on Plastic Hub.
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- Rims dia., mm: 10,5
- For classes: ES32
- *with offset hub
Old catalog #JK8733SP
-
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø12 mm, with offset hub for ES32, pair - #T203N
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø12 mm, with offset hub for ES32, pair - #T203N
1/32 Scale Reverse Hub Small Rim Tires on Plastic Hub.
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- Rims dia., mm: 12
- For classes: ES32
- *with offset hub
Old catalog #JK8733P
-
JK Model wheels 3/32" axle, 20 mm width, on plastic rims, pair - #T3S3N
JK Model wheels 3/32" axle, 20 mm width, on plastic rims, pair - #T3S3N
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 20
- Rims material: plastic
- For classes scale: 1/24
Old catalog #JK8700PP
-
JK Rear wheel tires D4 0.375"ID x 0.850"OD Natural Donut, pair - #DS/L
JK Rear wheel tires D4 "natural donut", pair - #DS/L
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: 21,5
- Made for rims, dia., mm: 10
These tires can use in all classes
Old catalog #JKP-D4
-
JK Natural rubber donuts (JKP-D5) inside Ø10,8 mm (.425"), outside Ø24,76 mm (.975"), pair - #DML/LB
JK Natural rubber donuts (JKP-D5)
PARAMETERS
- Inside dia.: 10,8 mm (.425")
- Outside dia.: 24,76 mm (.975").
Old catalog #JKP-D5
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.510" (12.95 mm) - #R3L
JK Plastic rims - #R3L
- 3/32" axle,
- width 20 mm,
- Ø.510" (12.95 mm).
-
JK Front wheels for 1/24, 0.750"D 0.530"H 0.375"W 3/32"Axle (Ø19,05 mm, rimSz 13,46 mm, width 9,525 mm, axle 2,36 mm), pair - #T113F
JK Front wheels for 1/24, pair - #T113F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.375" (9,525 mm)
- Dia.: 0.750" (19,05 mm)
- Rims material: plastic
- For classes: FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK8747PF
-
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P611S-6
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P611S-6
Old catalog #JK450011
-
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P612
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P612
Old catalog #JK440012
-
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P612-6
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P612-6
Old catalog #JK440012
-
JK Pinion 64 pitch, 13T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P613
JK Pinion 64 pitch, 13T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P613
-
JK Pinion 64 pitch, 13T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P613-6
JK Pinion 64 pitch, 13T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P613-6
-
JK Pinion 64 pitch, 13T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P613S
JK Pinion 64 pitch, 13T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P613S
-
JK Pinion 64 pitch, 13T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P613S-6
JK Pinion 64 pitch, 13T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P613S-6
-
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614
-
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P614-6
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P614-6
-
JK Pinion 64 pitch, 14T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614S
JK Pinion 64 pitch, 14T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614S
-
JK Pinion 64 pitch, 14T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P614S-6
JK Pinion 64 pitch, 14T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P614S-6
-
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615
-
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P615-6
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P615-6
-
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615S
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615S
-
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P615S-6
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P615S-6
-
JK Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.1 mm - #G639
JK Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.1 mm - #G639
Old catalog #JK42391
-
JK Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.1 mm, narrow - #G639N
JK Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.1 mm, narrow - #G639N
Old catalog #JK4239F
-
JK Gear 64 pitch, 40T, 0° angle, 3/32" axle - #G640
JK Gear 64 pitch, 40T, 0° angle, 3/32" axle - #G640
Old catalog #JKG640
-
JK Gear 64 pitch, 40T, 0° angle, 3/32" axle, 1 cd. (6 pcs.) - #G640-6
JK Gear 64 pitch, 40T, 0° angle, 3/32" axle, 1 cd. (6 pcs.) - #G640-6
Old catalog #JKG640-6
-
JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D
JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D
Old catalog #JK724415
-
JK Silver plated copper guide clips, pair - #U60
JK Pro Silver Plated Copper Guide Clips (pr)
-
JK silver plated copper guide clips, long, pair - #U28
JK silver plated copper guide clips, long, pair - #U28
-
JK silver plated copper guide clips, long, 1 cd. (10 pairs) - #U28-10
JK silver plated copper guide clips, long, 1 cd. (10 pairs) - #U28-10
-
JK Clip for C62 chassis, 1.5" spacing, 1 pair - #U30
JK Clip for C62 chassis, 1.5" spacing, 1 pair - #U30
Old catalog #JK90062
-
JK Body mounting clips 4.5 " (for 1/24 JK 4" "Cheetah X25" chassis), pair - #U44
JK Body mounting clips 4.5 " (for 1/24 JK 4" "Cheetah X25" chassis), pair - #U44
Clip for C21, C24, C25, C26, C40, C41, C45, C55, C60, C64, C80, C81 Chassis
Old catalog #JK9008
-
JK Cheetah .7 F1/INDY body clips (for 1/32 "Cheetah 11" chassis), pair - #U46
JK Cheetah .7 F1/INDY body clips (for 1/32 "Cheetah 11" chassis), pair - #U46
Clip for C1, C5, C10, C30, C35, C93 Chassis, 2" Spacing
Old catalog #JK9010
-
JK Motor Bracket for Production 1/24 JK 4" "Cheetah X25" 1 pc - #C40
JK Motor Bracket for Production 1/24 JK 4" "Cheetah X25" - #C40B
Old catalog #JK250115
-
JK 1/32 Cheetah 11 Chassis Two-Piece Pan for PRODUCTION 1/32 - #C1
JKPHC1132 - 1/32 Cheetah 11 / 3 piece chassis design for Production 1/32. Sheet of lead in a gift! - #C1
Old catalog #HC1132
-
JK 1/32 Cheetah 11 Chassis w 1-Piece Pan, Kit, for PRODUCTION 1/32 - #C5
Special order!
JKPX321 - 1/32 CHEETAH 11 CHASSIS WITH 1 PAN, 2 piece chassis, for Production 1/32 - #C5
Old catalog #JKX321
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
1/32 Center Section replacement for X32 Chassis JKP 1/32 CHEETAH 11 CHASSIS for PRODUCTION 1/32 - #JKPHC1132 & JKP 1/32 CHEETAH.11 CHASSSIS KIT W/1PAN for PRODUCTION 1/32- #JKPX32
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
Old catalog #HC1132P