Gears glued on 2 mm axis
-
ZHB GLUING SERVICE GEARS ON AXIE & MACHINING HUBS - #109
More & more sportsmen use gears glued on axle. It's connected with decrease imbalance, caused clamping of the screw and possibility use rims without offset of the hub in ES-32
Just let us know what gears and axle you need - and we will be work for you!
-
RED FOX 80 PITCH 43T, 0° angle, 2 mm axle, Ø14.35 mm glued on 2 mm axle KOFORD - ZHB#203
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K Gear 80 PITCH 43T, 0° angle, 2mm axle, Ø14.3 mm glued on 2 mm axle KOFORD - ZHB#201
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#207
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
HORKY BIG HUB 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#206
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#205
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#204
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 80 PITCH 45T, 0° angle, 2 mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#208
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB GEAR JK 80 PITCH, 45T, 0° angle, 2mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#209
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA GEAR CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAH#
The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm
CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable
You can order gluing any gear on any axle. Price for gluing & machining - $3.5 (ZHB#109)
-
S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K ES32 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm, glued on 2 mm KOFORD axle - ZHB#222
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES32 or ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#228
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)