F 1/32 Install Motor Tools
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 3/32" - DB#200-3/32-2
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 2 mm - DB#200-2-2
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
S&K F1 motor adjustment tool for offset crowns with 2 mm axle - #0104
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 2 mm
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
S&K F1 motor adjustment tool for offset crowns with 3/32" axle - #0103
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 3/32"
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.