80 Pitch

• 

  CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAHOZA

  The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm

  CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable 

  You can order gluing any gear on any axle. Price for gluing & machining - $3,5

  12.00 $

• 

  CAHOZA POLYMER GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,56 mm - #1

  POLYMER GEARS 80 PITCH ELITE
  polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth

  4.90 $

• S&K 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.3 mm glued on 3/32" axle ProSlot - ZHB#210

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  12.00 $

• 

  CAHOZA GEAR CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAH#

  The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm

  CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable 

  You can order gluing any gear on any axle. Price for gluing & machining - $3.5 (ZHB#109)

  
  

  12.00 $

• VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB#211

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  12.00 $

• VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB_#211

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  12.00 $

• JK 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.28 mm glued on 3/32" axle ProSlot - ZHB#212

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  12.00 $

• 

  HORKY BIG HUB 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.35 mm glued on 3/32" axle ProSlot - ZHB#213

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K Gear 80 PITCH, 45T, 0° angle, 2 mm axle, Ø14,9 mm - #SK45802

  S&K Gear 80 PITCH, 45T, 0° angle, 2 mm axle, Ø14,9 mm - #SK45802

  4.16 $

• 

  MASHKOZA GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #45-2.36mm

  MASHKOZA GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #45-2.36mm 

  2.00 $

• 

  JK GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, w/screw - #G845

  JK GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, w/screw - #G845

  Old catalog #JK4345

  4.99 $

• 

  S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #SK4580

  S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #SK4580

  4.16 $

• 

  S&K 80 PITCH 45T, 0° angle, 2 mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#208

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, for gluing - #SK4580G

  S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, for gluing - #SK4580G

  4.20 $

• S&K 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6 mm glued on 3/32" axle ProSlot - ZHB#214

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  HORKY PINION 80 PITCH, 6T, 1.5 mm bore, EDM

  HORKY PINION 80 pitch 6 teeth, EDM, shaft 1.5 mm 

  Electrical discharge machining (EDM) 

  26.32 $

• 

  CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A

  CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A

  31.20 $

• 

  CAHOZA POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE, Ø14,9 mm - #1

  POLYMER GEARS 80 PITCH ELITE
  polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth

  4.90 $

• 

  YRE Pinion 80 pitch 7 teeth, 0° angle 1.5 mm bore, EDM

  YRE Pinion 80 pitch 7 teeth, 0° angle 1.5 mm bore, EDM

  Manufactured on the Japan EDM machine AMADA. High quality swiss steel.

  6.00 $

• 

  ARP PINION 80 PITCH, 7T, 0° angle, 1.5 mm bore - #ARP80077

  Very good alternative for HORKY pinions. One hundred percent ratio of price/quality

  More smaller wear resistance, but enought soft work of gear

  
  

  7.99 $

• 

  ARP PINION 80 PITCH, 8T, 0° angle, 1.5 mm bore - #ARP800

  Very good alternative for HORKY pinions. One hundred percent ratio of price/quality

  More smaller wear resistance, but enought soft work of gear

  5.00 $

• 

  ATTAN POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE - #ATT8045

  ATTAN POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE - #ATT8045

  5.26 $

• JK 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6mm glued on 3/32" axle ProSlot - ZHB#215

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#216

  The hub is machined to a diameter 3.5 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $